產品說明0
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
型號：B0283，Arducam 升級版攝影機雲台平台，適用Pi Camera V3/V1/V2、Arducam 16MP/64MP（不含camera模組）
B0283，Arducam Upgraded Camera Pan Tilt Platform Compatible with Raspberry Pi Camera Module 3/V1/V2, Nvidia Jetson Orin Nano/Orin NX
建議型號：
Arducam OV5647 (B0033)
IMX219 (B0390)
IMX477 Series (B0240)
16MP camera (B0371)
64MP camera (B0399)
Mini HQ camera (B0303R)
配件清單
- 2 x Digital servos 舵機
- 1 set upgraded bracket pieces 升級版支架部件
- 1 x Customized control board 客製化控制板
- 4 x Female to female jumper wires 母對母跳線 (The wire has no fixed color 線材顏色不固定)
- 1 x Screws pack 螺絲包
- 1 x Manual 說明書
Overview 概述
Arducam B0283 is a new member of the family, which is an upgraded version of B0227 with improved bracket quality and a mini customized control board. It can move the camera for pan and tilt directional control, and that means a single camera can be used to monitor places that should be covered by multiple ones.
Arducam B0283 是該系列的新成員，它是 B0227 的升級版，支架品質更佳，並配備了迷你客製化控制板。它能夠實現攝影機的水平和垂直方向控制，這意味著一台攝影機即可監控原本需要多台攝影機才能覆蓋的區域。
Features 特徵
- Pan Tilt Kit: Specifically designed for a broader view on raspberry pi camera V3/V2/V1 and Arducam 16mp/64mp/Mini HQ cameras.
雲台套件：專為樹莓派攝影機 V3/V2/V1 和 Arducam 16mp/64mp/Mini HQ 攝影機設計，以獲得更廣闊的視野。 - More Coverage: Free 180° panning and tilting in a smaller PT bracket. Work with all Raspberry Pi models, as well as on Nvidia Jetson Board and other platforms (RPi demo only).
更廣的覆蓋範圍：更小的雲台支架即可實現 180° 自由水平旋轉和垂直旋轉。相容於所有 Raspberry Pi 型號，以及 Nvidia Jetson 開發板和其他平台（僅限 RPi 演示）。 - Customized Control Board: I2C controlled, outputs the PWM signals to drive the servo motors directly, allowing the camera can be mounted in the base bracket.
客製化控制板：I2C 控制，輸出 PWM 訊號直接驅動伺服電機，使相機可以安裝在底座支架上。 - Mini Digital Servos: Two GH-S37D digital servos for a faster speed, higher torque and better holding capability (than analog servos).
迷你數位舵機：兩台 GH-S37D 數位舵機，速度更快，扭力更大，保持能力更強（比類比舵機）。 - Only simple wiring for use. You'll be Getting: 1 set pan tilt bracket kit, 2 digital servo motors, a PTZ controller board (with 4 jumper wires), and a pack of screws.
使用方法簡單，只需簡單接線。您將收到：1套 雲台支架套件、2個 數位伺服馬達、1個 PTZ 控制器板（附4 根 跳線）和 一包螺絲。
Specifications 規格
Digital Servo 數字伺服
- Torque 扭力 : 0.6 kg/cm at 3.6V, 0.8 kg/cm at 4.8V
- Operating Speed 操作速度 : 0.13sec/60° at 3.6V, 0.09sec/60° at 4.8V
- Operating Voltage 工作電壓 : 3.6v～4.8v
- Operating Current 工作電流 : ＜350mA
- Dead Band 死區 : 3 usec
- Dimension 尺寸 : 20mm x 8.75mm x 22mm
Customized Control Board 客製化控制板
- PWM resolution 解析度 : 12-bit
- Communication interface 通訊介面 : I2C
- Operating voltage 工作電壓 : 3V-5V
- Dimension 尺寸 : 38mm x 28mm
筆記
相容於多種攝影機
PT支架相容於與官方樹莓派攝影機模組3 /V1 / V2和Arducam 1600萬像素 / 6400萬像素 / Mini HQ攝影機尺寸相同的樹莓派攝影機。
建議：
Arducam OV5647(B0033) / IMX219(B0390) / IMX477 系列 (B0240)
Arducam 16MP 相機 (B0371)
Arducam 64MP 相機 (B0399)
Arducam Mini HQ 相機 (Bducam 303R)
| Note on Supported Raspberry Pi Boards and OS |
| Platform | Trixie(rpicam) | Bookworm(rpicam) | Bullseye(libcamera) | Buster(raspistill) |
| Raspberry Pi 5 | √ | √ | | |
| Raspberry Pi 4B / 3B+ / 3A+ / Zero / Zero 2 W | √ | √ | √ | √ |
Raspberry Pi CM3 / CM3+ / CM4 / CM5
(extra carrier board required) | √ | √ | √ | √ |
示意圖
文件
三維繪圖
使用者指南
