產品說明0
樹莓派 Raspberry Pi USB CAN Module（USB2CAN-Module）
[打包清單：]
-
1個USB轉CAN轉換器
-
1個接線端子
-
1個USB電纜
[軟件下載：]
[描述：]
-
USB-CAN模塊是一個“即插即用”和雙向端口供電的USB轉CAN轉換器，通過CAN-Bus連接可以穩定地實現Raspberry Pi與其他設備之間的遠程通信。兼容Raspberry Pi Zero / Zero W / 2B / 3B / 3B +。
-
憑藉體積小，操作方便，它是一種經濟高效的解決方案，對於所有數據轉換/設備保護應用而言都是安全可靠的，適用於任何經驗豐富的工程師與昂貴的工業設備接口，而且非常簡單，適合業餘愛好者在家中使用。
[特徵：]
-
1.兼容Raspberry Pi Zero / Zero W / 2B / 3B / 3B +。
-
2.完全支持CAN總線2.0A和2.0B規範。
-
3.運行Raspberry Pi的Debian9系統時，無需使用軟件驅動程序。
-
4.附帶Socket CAN演示，節省您的開發時間。
-
5.“即插即用”（可熱插拔）USB設備，無需外接電源。
-
6.板載高速STM32單片機，更強的數據處理能力和更低的功耗。
-
7.更寬的CAN波特率，20Kbps - 1Mpbs可任意編程。
-
8.電源和信號隔離，內置浪湧和靜電保護。
-
9. 120歐姆可選跳線功能。
Datasheet: https://github.com/INNO-MAKER/usb2can
Features:
- Innomaker USN-CAN Analyzer compatible with Raspberry Pi Zero(W)/Pi3B+/PI4/Beaglebone/Tinker Board and any single board computer.
- Plug and Play USB device. No external power required. Support wider CAN baud rate, from 20Kbps to 1Mbps can be programmed arbitrarily.
- On board STM32F0 microcontroller, high speed data transfer with DMA technique. Support for CAN bus 2.0A and 2.0B specification.
- Power supply isolation, signal input/output isolation, Built-in surge and static protection. 120Ohm resistor selectable jumper feature.
- Comes with C/Python demos of Socket-CAN, detailed user manual and friendly technology support.
- InnoMaker Windows/MacOs/Linux Soft_API, Support Python
- CE,FCC Certificated
產品規格
[Technical Specification:]
- CAN: D-SUB, 9 pins
- USB: USB 2.0 Full-Speed, Micro USB
- Specification: 2.0A (standard format) and 2.0B (extended format), ISO 11898-2 High-speed CAN
- Data Rate: From 20kbps to 1Mbps can be programmed arbitrarily
- Isolation Voltage: 1.5K VDC/min, 3K VDC/1s
- Microcontroller: STM32F0, 48MHz
- Termination: 120 Ohm resistor selectable jumper
- CAN Transceiver: ISO1050DUBR ,Texas Instruments
- Work Temperature: -40°~ 85°
- Relative humidity: 15-90%, not condensing
- PCBA Size (L * W * H): 56.50mm * 31.20mm * 14.20mm
- Weight: 15.5 g
