洋天科技洋天科技
公司簡介訂購方式匯款確認檔案下載 聯絡我們保固說明訂單查詢討論區
電子郵件:

密碼:

忘記密碼
加入會員
  首頁 | 原廠 Arduino® | 特殊服務設計 | 轉接座及轉接板/麵包板 | 開發板/燒錄器/模擬器 | 相容 For Arudino® 週邊及配件 | OKdo系列 | Saleae 系列 | Adafruit 系列 | ArduCam 系列 | Camera 攝像頭 | ROCK 系列 | Debix系列開發板 | Raspberry Pi 樹莓派 | Banana Pi 香蕉派 | BeagleBone 狗骨頭 | M5Stack系列 | Micro:bit (BBC)系列 | NVIDIA Jetson Nano系列 | Pololu 系列 | Pycom 系列 | Seeed 系列 | Sparkfun 系列 | WeMos 系列 | 傳感器 | Cubieboard/CubieTruck系列 | Firefly 系列 | Microduino系列 | Orange Pi 香橙派 | PCB板 | PLC 系列 | Robot 機器人 | UDOO 系列 | RedBearLab 系列 | LattePanda系列 | LittleBits 系列 | Libelium 系列 | PCduino | RobotElectronics 系列 | MageDok 顯示屏 | LCD/LCM/TFT/LVDC | Dimension Engineer 系列 | 通訊模組 | 影音器材(含轉換器) | 線材/連結器/轉換器 | 測量儀器 | 馬達/馬逹控制器/電源模組 | 其他 | 焊接/維修工具 | IC零件 | LED燈-裝飾燈 | 工作站迷你電腦 mini PC | 擴大器 | 雕刻機 | 電池 | 電腦周邊 | 檢定考套件 | 停售商品
  首頁 » 商品目錄 » Sparkfun 系列 » Product Categories » GPS BOARDS » 22196
商品搜尋 進階
 |  購物車內容  |  結帳   
商品分類
  **Teensy
  *Cable 線材
  *FLIR 系列
  *Intel® Edison
  *IQAudio 系列
  *LED EL 燈條
  *LilyPad系列
  *MyoWare 肌肉系列
  *Qwiic系列
  Audio
  Camera 攝像頭
  Components
  Educators
  ESPRESSIF (ESP)
  IoT
  Programmers
  Prototyping
  Retail
  Robotics
  Swag
  Tools
  Widgets
  Arduino
  Biometrics
  Breakout Boards
  cellular
  Development Tools
  Drivers
  E-Textiles
  IC
  LCDs
  Product Categories
    GPS BOARDS
    LoRa
    MicroMod
    OpenMV
  Sensors
  空板
  GPS
  Kits
  Wireless
  停售/停產
Arduino
Pololu
Seeed
Sparkfun
robot-electronics
dimensionengineering
libelium
adafruit
udoo
redbearlab
Arducam
goembed
Saleae
okdo
服務台
公司簡介
退換貨服務
訂購方式
聯絡我們
匯款確認
[<< 前一頁]  瀏覽相同分類產品 19 / 19  [下一頁 >>]
SparkFun u-blox ZED-F9P NEO-D9S Combo Breakout (SPX-20167)
NT$11,000
運費NT$50
條碼22196
產品說明

※本產品原廠代理從國外進口,有些交期較長,下訂前請詢問!

SparkFun 原廠 u-blox ZED-F9P NEO-D9S Combo Breakout (SPX-20167)

DESCRIPTION

With GNSS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! Our versatile combo breakout pairs the u-blox ZED-F9P multi-band high precision GNSS module with the NEO-D9S L-band GNSS correction data receiver. With a clear view of the sky, especially a clear view to the South, this combo breakout will deliver centimeter-level accuracy positioning without needing separate RTK or NTRIP corrections!
使用GNSS,您可以知道自己在哪裡,要去哪裡,以及如何在30秒內到達地球上的任何地方。這意味著精度越高越好!我們的多功能組合分線將 u-blox ZED-F9P 多波段高精度 GNSS 模組與 NEO-D9S L 波段 GNSS 校正數據接收器配對。憑藉清晰的天空視野,特別是向南的清晰視野,這種組合突破將提供釐米級的精確定位,而無需單獨的RTK或NTRIP校正!

The ZED-F9P NEO-D9S combo board raises the bar for high-precision GPS and is one of a line of powerful RTK boards featuring the ZED-F9P module from u-blox. The ZED-F9P is a top-of-the-line module for high accuracy GNSS and GPS location solutions that is capable of centimeter-level three-dimensional accuracy. With this board, you will be able to know where your (or any object's) X, Y, and Z location is to better than an inch, without needing a separate correction source!ZED-F9P NEO-D9S
組合板提高了高精度 GPS 的標準,是採用 u-blox 的 ZED-F9P 模組的強大 RTK 板系列之一。ZED-F9P 是用於高精度 GNSS 和 GPS 定位解決方案的頂級模組,能夠實現釐米級的三維精度。使用此板,您將能夠知道您(或任何物體)的X,Y和Z位置優於一英寸,而無需單獨的校正源!

We've paired the ZED-F9P with the NEO-D9S-00B satellite data receiver for L-band correction broadcast. The NEO-D9S can be configured for use with a variety of L-band correction services including u-blox's PointPerfect service. It decodes the satellite transmission and outputs a correction stream directly to the ZED-F9P via UART2, enabling the ZED-F9P to reach accuracies down to centimeter level straight out of the box!
我們將 ZED-F9P 與 NEO-D9S-00B 衛星數據接收器配對,用於 L 波段校正廣播。NEO-D9S 可配置為與各種 L 波段校正服務一起使用,包括 u-blox 的“完美點”服務。它對衛星傳輸進行解碼,並通過UART2將校正流直接輸出到ZED-F9P,使ZED-F9P能夠開箱即用地達到釐米級的精度!

We've equipped the combo board with two USB-C connectors, one for the ZED-F9P and one for the NEO-D9S, so you can hook the board to your laptop and configure both devices using u-blox u-center if you want to. We've also equipped the combo board with two Qwiic connectors, so you can connect it quickly and easily to your favorite development board and control it using our sophisticated u-blox GNSS Arduino Library. The ZED-F9P and NEO-D9S share a single SMA antenna connection thanks to a miniature surface-mount power divider (antenna splitter) and 3.3V power is provided for an active antenna. If that wasn't enough, we've provided breakout pads for the I2C, UART1 and UART2 ports on both devices. The UART2 pins are inter-connected (crossed-over) by default so the NEO-D9S can feed corrections directly to the ZED-F9P, but you can isolate them if you want to by opening the jumper links.
我們在組合板上配備了兩個 USB-C 連接器,一個用於 ZED-F9P,一個用於 NEO-D9S,因此您可以將該板連接到筆記型電腦,並根據需要使用 u-blox u-center 配置兩個設備。我們還為組合板配備了兩個 Qwiic 連接器,因此您可以快速輕鬆地將其連接到您最喜愛的開發板,並使用我們複雜的 u-blox GNSS Arduino 庫對其進行控制。ZED-F9P 和 NEO-D9S 採用微型表面貼裝功率分配器(天線分路器),共用單個 SMA 天線連接,併為有源天線提供 3.3V 電源。如果這還不夠,我們已經為I提供了突破墊2兩個設備上的 C、UART1 和 UART2 連接埠。默認情況下,UART2 引腳是互連(交叉)的,因此 NEO-D9S 可以直接將校正饋送到 ZED-F9P,但如果需要,可以通過打開跳線鏈路來隔離它們。

Please note: the u-blox Thingstream PointPerfect Correction Service is only available to "B2B Customers" (Business To Business Customers). Please check the Service Terms before purchasing hardware.
請注意:u-blox Thingstream 完美矯正服務僅適用於“B2B 客戶”(企業對企業客戶)。請在購買硬體前查看服務條款

Please note: the u-blox Thingstream PointPerfect Correction Service is currently only available in the USA's 48 contiguous states and in Europe. Please see the PointPerfect coverage map for more details.
請注意:u-blox Thingstream 完美矯正服務目前僅在美國的 48 個相鄰州和歐洲提供。有關更多詳細資訊,請參閱“完美點”覆蓋範圍地圖

This product requires a suitable L1/L2/L-band antenna: be sure to check out the related products/hookup accessories and pick a suitable antenna for your project.
本產品需要合適的L1/ L2 / L波段天線:請務必查看相關產品/連接配件,併為您的專案選擇合適的天線。

Experimental Product: SparkX products are rapidly produced to bring you the most cutting edge technology as it becomes available. These products are tested but come with no guarantees. Live technical support is not available for SparkX products. Head on over to our forum for support or to ask a question.
實驗產品:SparkX產品快速生產,為您帶來最前沿的技術。這些產品經過測試,但不能保證。實時技術支援不適用於 SparkX 產品。前往我們的論壇尋求支援或提出問題。

The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.
星火趣Qwiic連接系統是I的生態系統2C感測器、執行器、遮罩和電纜,使原型設計更快,更不容易出錯。所有支援 Qwiic 的電路板都使用一個常見的 1mm 間距 4 針 JST 連接器。這減少了所需的PCB空間量,極化連接意味著您不會錯誤地連接它。

FEATURES

ZED-F9P Features 特點 :

  • Concurrent reception of GPS, GLONASS, Galileo and BeiDou
  • Receives both L1C/A and L2C bands
  • ZED-F9P Current Consumption: 68mA - 130mA (varies with constellations and tracking state)
  • Time to First Fix 首次修復時間 : 25s (cold), 2s (hot)
  • Max Navigation Rate 最大導航速率 :
    • PVT (basic location over UBX binary protocol) - 25Hz
    • RTK - 20Hz
    • Raw - 25Hz
  • Horizontal Position Accuracy 水平位置精度 :
    • 2.5m without RTK
    • 0.010m with RTK
  • Operational Limits 操作限制
    • Max G: ≤4G
    • Max Altitude: 50km (49.7 miles)
    • Max Velocity: 500m/s (1118mph)
  • 1.5mAh battery backup for RTC
  • Default I2C address: 0x42

NEO-D9S Features 特點 :

  • Concurrent reception with L-Band Satellite
  • Receives L-Band
    • 1525 MHz to 1559 MHz
  • Time to First Frame
    • <10s @ 2400bps
  • User Data Rates
    • 600, 1200, 2400, 4800 baud
  • Vehicle Dynamics
    • Dynamics: +/- 2g acceleration for all data rates (600 bit/s, 1200 bit/s, 2400 bit/s, 4800 bit/s)
    • Velocity: Up to and including 300 km/h
  • Current Consumption (Acquisition & Tracking):
    • Peak: 130mA
    • Average: 35mA
  • Default I2C address: 0x43

Breakout Features 突破特點 :

  • Input Voltage: 5V or 3.3V but all logic is 3.3V
  • 2x USB Type C Connector
    • Separate connectors for the ZED-F9P and NEO-D9S
  • 2x Qwiic Connectors
  • Integrated SMA connector for use with a L1/L2/L-Band antenna of your choice
    • On-board power divider (antenna mux)
    • 3.3V power for an active antenna
  • LEDs
    • Power
    • RTK (Off: No Carrier Solution; Flashing: Floating Solution; On: Fixed Solution)
    • GEO: Geofence
    • TP: Timing Pulse (Pulse Per Second)
  • Jumpers
    • LEDs x 4
    • UART2: TX2-RX2 RX2-TX2
    • I2C Pull-Up Resistors
    • USB Shield
  • Board Dimensions 電路板尺寸
    • 1.70" x 2.50" (43.2mm x 63.5mm)

Note: The I2C address of the ZED-F9P is 0x42. The I2C address of the NEO-D9S is 0x43. Both are software configurable. A multiplexer/Mux is required to communicate with multiple ZED-F9P modules on a single bus. If you need to use more than one ZED-F9P module, consider using the Qwiic Mux Breakout.
注意:我2ZED-F9P 的 C 位址0x42。我2NEO-D9S的C位址0x43。兩者都是軟體可配置的。需要多路複用器/多路複用器才能與單個總線上的多個ZED-F9P模組進行通信。如果需要使用多個 ZED-F9P 模組,請考慮使用 Qwiic 多路複用器分支

DOCUMENTS

SparkFun resources:

u-blox resources:

相關資訊

範例:

 

問與答

目前沒有任何商品問答!
本商品上架日期:2022-09-29.
評價
購物車 更多
空的...
查詢訂單狀態
 
請輸入您的訂單編號
商品通知狀態 更多
通知SparkFun u-blox ZED-F9P NEO-D9S Combo Breakout (SPX-20167)
更新時通知我
推薦給朋友
 
推薦這個商品給朋友

聯絡方式:手機:0933807110 或 0968222607
E-mail:i0104@ms13.hinet.net(主要信箱) & i03070309@yahoo.com.tw(次要) & a_te0307@hotmail.com & A9215017@mail.ntust.edu.tw & r94922042@ntu.edu.tw