| 【BPI-M5】 VS 【Odroid C4】 VS 【RPI 4】 |
| |
Banana Pi BPI-M5 |
Odroid C4 |
Raspberry Pi 4 |
| Processor |
Amlogic S905X3 Quad-Core Cortex-A55 ARMv8.2-A 64-bit 1.5GHz |
Amlogic S905X3 Quad-Core Cortex-A55 ARMv8.2-A 64-bit 1.5GHz |
Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz |
| GPU |
Mali-G31 MP2 GPU |
Mali-G31 MP2 GPU |
Broadcom VideoCore VI |
| RAM |
4GB LPDDR4 |
DDR4 memory (4GiB) |
2GB, 4GB or 8GB LPDDR4-3200 SDRAM |
| Storage |
micro SD card slot & 16GB eMMC flash on board |
micro SD card slot , non EMMC |
micro SD card slot, non EMMC |
| Network |
GbE ,Optional WiFi USB dongle |
GbE |
GbE, 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE |
| Video Output |
1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) |
1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) |
2 × micro-HDMI 2.0 |
| Audio Output |
3.5mm jack and 1 x HDMI digital output |
N/A |
3.5 mm analogue audio-video jack |
| DSI |
N/A |
N/A |
2-lane MIPI DSI display port |
| CSI |
N/A |
N/A |
2-lane MIPI CSI camera port |
| USB |
USB 3.0 x 4 TYPE C |
USB 3.0 x 4, 1 x Micro USB 2.0 port (OTG) |
2 USB 3.0 ports; 2 USB 2.0 ports; |
| Power |
5 volt @3A via Micro USB (TYPE C) |
1 x DC power jack (Outer diameter : 5.5mm, inner diameter : 2.1mm) |
5V DC via USB-C connector (minimum 3A*) |
| IR |
Yes |
Yes |
N/A |
| GPIO |
40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). |
40 x GPIO pins |
40-pin GPIO header, populated |
| Button |
Reset, user and U-boot |
N/A |
N/A |
|
| LED |
Power Status and Activity status |
Power Status and Activity status |
Power Status and Activity status |
| Dimensions & weight |
85x56mm, 48g |
|
88 mm × 58 mm × 19.5 mm, 46 g |
| Linux Support |
Linux & Android |
Linux & Android |
Linux & Android |
