產品說明6
樹莓派Pi5B專用：Pi M.2 HAT+，PCIE轉M.2 轉接板 （含FPC線，可支援2230/2242 SSD）高速讀寫
樹莓派原廠 Pi5 PCIe 轉M.2 介面擴充板 HAT+標準高速讀寫 介面轉接板 Pi5專用轉接板 適用NVMe協定M.2介面硬碟
相容於2230/2242尺寸的M.2硬碟，支援Gen2和Gen3模式，支援從SSD啟動PI5
請注意：這是適用於使用 M.2 規範的設備的 M.2 HAT+。儘管與 M.2 設備安裝在相同的連接器中，SparkFun MicroMod 系列仍使用不同的引腳排列。 MicroMod 系列不適用於此 HAT。
資料路徑：www.waveshare.net/wiki/Raspberry_Pi_M.2_HAT+
產品規格
The Raspberry Pi M.2 HAT+ enables you to connect M.2 peripherals such as NVMe drives and AI accelerators to Raspberry Pi 5’s PCIe 2.0 interface, supporting fast (up to 500 MB/s) data transfer to and from NVMe drives and other PCIe accessories.
Raspberry Pi 5’s single-lane PCI Express 2.0 interface is exposed on a 16-pin, 0.5mm- pitch FPC connector; the M.2 HAT+ M Key is a mechanical adapter board that convert sbetween this connector and a subset of the M.2 standard. It supports devices that have the M.2 M key edge connector, in the 2230 and 2242 form factors. It is capable of supplying up to 3A to connected M.2 devices. The Raspberry Pi M.2 HAT+ conforms to the Raspberry Pi HAT+ specification and is auto-detected by the latest Raspberry Pi software/firmware. It is supplied with a 16mm stacking header and threaded spacers, so it can be fitted to a Raspberry Pi 5 with the Raspberry Pi Active Cooler in place.
Please Be Aware: This is a M.2 HAT+ for devices that use the M.2 specification. The SparkFun MicroMod line uses a different pinout despite fitting in the same connector as M.2 devices. The MicroMod line does not work with this HAT.
【FEATURES】
- Supports single-lane PCIe 2.0 interface (500 MB/s peak transfer rate)
- Supports devices that use the M.2 M key edge connector
- Supports devices with the 2230 or 2242 form factor
- Capable of supplying up to 3A to connected M.2 devices
- Includes power and activity LEDs
- Conforms to the Raspberry Pi HAT+ specification
- Supplied with ribbon cable, 16mm stacking header, threaded spacers and screws, and knurled double-flanged screw to secure and support the M.2 peripheral
- 0°C to 50°C (ambient) Operating Temperature
