※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
Blink Blink ICE Tower CPU Cooling Fan for Raspberry Pi (Support Pi 4)
樹莓派 RGB 風扇： ICE Tower CPU Cooling Fan (114992048)
Tower structure,RGB LED,5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all those combinations make this super radiator for Raspberry Pi 4 / 3. In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃
文檔：https://wiki.52pi.com/index.php/ICE-Tower_CPU_Cooling_Fan_for_Raspberry_Pi_SKU:_EP-0107
Jingle bells, jingle bells.
Blink fan, blink fan.
Meet this colorful, shining, blink super Raspberry Pi ICE Tower CPU Cooling Fan!
Well, as you may know, this **Blink Blink ICE Tower CPU Cooling Fan for Raspberry Pi** is the RGB version of our ICE覆盆子Pi ICE Tower CPU散熱風扇的RGB版本. The same price, multiple times cool !!!
Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi. In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃. What amazing! Best of all, this cooling fan supports the new Raspberry Pi 4 Mode BRaspberry Pi 4 ModelB. In our actual use, we found that Raspberry Pi 4 has a large amount of heat. with the help of this super fan, the powerful performance of the Raspberry Pi 4 will be fully released.
Mounting Guide and Evaluation 安裝指南：https://youtu.be/l5IFD2wq_gA
The final cooling effect may vary depending on the test conditions. Due to shipping restrictions, we did not equip the accessories with silicone grease. If you use the thermal conductive tape in the accessory, you can reduce the temperature from 80 ° C to 48 ° C under the same conditions. It can be seen that the use of silicone grease is better. If you want to achieve the best heat dissipation, we recommend that you purchase silicone grease yourself.
樹莓派3B +
- 1.用M2.0螺釘將鋼製安裝固定器固定到散熱器的散熱立方體上
- 2.用M2.5銅棒將鋼製安裝固定器固定在Raspberry Pi 3B +的安裝孔上，並確保散熱與CPU護罩正確接觸。
- 3.用M2.5螺母將銅棒固定到Raspberry Pi。
- 4.將紅線連接到GPIO 5V引腳，黑線連接到GPIO GND引腳。
樹莓派4B
- 1.用M2.0螺釘將鋼製安裝固定器固定到散熱器的散熱立方體上
- 2.用M2.5銅棒將鋼製安裝固定器固定在Raspberry Pi 4B的安裝孔上，並確保散熱與CPU護罩正確接觸。
- 3.用M2.5螺母將銅棒固定到Raspberry Pi。
- 4.將紅線連接到GPIO 5V引腳，黑線連接到GPIO GND引腳。
