產品說明3
新型號：RSP-PICANFD3ASMPS
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
PiCAN FD Board with Real Time Clock for Raspberry Pi 3/4 with 3A SMPS
PiCAN FD 模組，帶實時時鐘 Pi 3/4專用 with 3A SMPS (RSP-PICANFD3ASMPS)
This PiCAN FD board provide CAN-Bus FD capability for the Raspberry Pi. It uses the Microchip MCP2518FD CAN controller. Connection are made via DB9 or 3 way screw terminal. A real time clock with battery back up (battery not included) is also on the board.
該 PiCAN FD 板為 Raspberry Pi 提供 CAN-Bus FD 功能。它使用 Microchip MCP2518FD CAN 控制器。通過 DB9 或 3 路螺釘端子進行連接。板上還有一個帶備用電池的實時時鐘（不包括電池）。
The improved CAN FD extends the length of the data section to up to 64 bytes per frame and a data rate of up to 8 Mbps.
改進的 CAN FD 將數據部分的長度擴展到每幀 64 字節，數據速率高達 8 Mbps。
Included on board 3A SMPS module for input voltage of 7v to 24v. This will power the PiCAN FD board and the Raspberry Pi.
板載 3A SMPS 模塊，用於 7v 至 24v 的輸入電壓。這將為 PiCAN FD 板和 Raspberry Pi 供電。
Features
- Microchip MCP2518FD CAN Controller
- Arbitration Bit Rate upto 1Mbps
- Data Bit Rate upto 8Mbps
- CAN FD Controller modes
- Mixed CAN 2.0B and CANFD mode
- CAN 2.0B mode
- Conforms to ISO 11898-1:2015
- High speed SPI Interface
- CAN connection via standard 9-way sub-D connector or screw terminal
- Compatible with OBDII cable
- Solder bridge to set different configuration for DB9 connector
- 120Ω terminator ready
- Serial LCD ready
- LED indicator
- Four fixing holes, comply with Pi Hat standard
- SocketCAN driver, appears as can0 to application
- Interrupt RX on GPIO25
- RTC with battery backup (battery not included)
Documents
Distributors
