產品說明1

※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！

　　Arducam Multi Camera Adapter Doubleplexer Stereo Module V2 for Raspberry Pi CameraV3, Raspberry Pi Zero, Pi4/3B+/3

　　型號：B016601，Arducam 多攝像頭適配器 雙工立體聲模塊 V2，適用於樹莓派 Pi Zero、Pi 3B/3B+、4B,CameraV3

型號：B016601，Arducam Multi Camera 多攝像頭適配器擴展板V2，適用於Pi Zero、Pi3、Pi4、CameraV3

B0166的新版本。

多相機解決方案：主要為Raspberry pi ZERO設計，最多連接兩個5MP OV5647、8MP IMX219、 12.3MP IMX477、12MP IMX708相機。不允許混合。

• Alternative Work: Only one of the two cameras can be activated at a time, and they are working in alternate ways.
• Easy to Operate: A simple software built to run two cameras.
• Compatibility: It also can be used for other Raspberry Pi boards with minor software modifications.

【舊版】示意圖

 

Arducam Multi-camera adapter board for Raspberry Pi Camera V2.1

注意：Raspberry Pi板，4個Pi Camra V2 相機，3D打印盒和三腳架不包括在內

 

Package Including: 清單

1 x Arducam Multi-Camera Adapter Doubleplexer Stereo Module V2 for Raspberry Pi Zero, Pi 3/3 b+, 4b

1 x 60mm 15pin FPC cable

　　This multi-camera adapter board is designed for Raspberry pi ZERO and let you connect two 5MP or 8MP or 12MP cameras to Pi Zero.

　　Only one of the two cameras can be activated at a time, and they are working in alternate ways. It cannot run two cameras at the same time, but we build a simple software which can run two cameras and make it looks like working at the same time.

　　But the drawback is the frame rate, and resolution will be fairly low, may be useful for surveillance.

　　Please note that Raspberry Pi multi-camera adapter board is a nascent product that may have some stability issues and limitations because of the cable’s signal integrity and RPi's closed source video core libraries, so use it on your own risk. This version supports 8MP Pi camera board. And it also can be used for other Raspberry Pi boards with minor software modifications.

 

• IoT cameras
• Robot cameras
• Wildlife cameras
• 3D scanner, multi camera sync solution, etc.

• The default usage of this product is taking still pictures, and when it is used to store videos, the frame rate will be reduced.
• The Raspberry Pi multi-camera adapter board is a nascent product that may have some stability issues and limitations because of the cable’s signal integrity and RPi's closed source video core libraries, so use it on your own risk.
• For the use of remote controlling terminals, first specify the location of the image display, please run the commands shown as below:

【示意圖】：

 

相關文件

When you use a DSI display together with this adapter, you will encounter the issue of I2C conflicts. We recommend you use HDMI displays or run headless when using this adapter.

The Arducam Multi-camera adapters ONLY support 3 kinds of camera modules by default:

ALL other MIPI camera modules intended to be used with Arducam multi-camera adapters needs extra customization. Extra fees may occur.

 

If you need the cameras to run at a certain resolution or framerates, please request customization. Extra fees may occur.

 

相關資訊

 

問與答