產品說明0
Raspberry Pi PoE+ Injector 供電器（不含電源線），適用樹莓派Pi3B+、Pi4B、Pi5B供電
Raspberry Pi PoE+ Injector | 樹莓派 PoE+ 供電器
為非PoE 交換器端口 增加PoE 供電功能
單端口30W 輸出，支援IEEE 802.3af/at 網路標準
A single port 30W PoE+ Injector enabling PoE supply to PoE enabled Raspberry Pi boards.
A single port 30W PoE+ Injector enabling PoE supply to PoE enabled Raspberry Pi boards. This device can supply both 55V, 550mA and 10/100/1000 Mbps data rates to the Pi through a single ethernet cable connection.
＊Power cable sold separately.／電源線單獨販售
＊This will work with all Raspberry Pi single board computers from the 3B+ onward (excluding the Zero series).適用於 Pi3B+ 以上版本的所有開發版（不包括 Zero 系列）。
Look to our related products for a North American plug option and ethernet cables. This does require the Raspberry Pin PoE HAT which is only available for the the 3B+ and 4 series, but keep an eye out for a new HAT that is compatible with the Raspberry Pi 5 shortly.／這確實需要僅適用於 Pi3B+、Pi4B 系列的 Raspberry Pin PoE HAT，但請留意即將與 Raspberry Pi 5 相容的新 HAT。
特點和注意事項
- 為非PoE 交換機端口,增加PoE 供電功能
- LED 指示燈，連接通電設備時長亮，未連接受電設備時閃爍
- 單端30W 輸出，支援IEEE 802.3af/at 網路標準
- 注意觀察IN和OUT，IN連接交換機，OUT連接POE設備
- 斷電還閃爍LED是正常現象，等待內部電釋放完畢即可
〔Features & Specs〕：
- 10/100/1000 Mbps data rates
- Input： 100-240Vac
- Output 55V, 550mA
- Input connector： RJ45 (Data)
- Output connector： RJ45 (Data, Power) 輸出供電
【Specifications】：
- Data rate： 10/100/1000 Mbps
- Input voltage： 100 to 240V AC
- Output power： 30W
- Power output on pins: 4/5 (+), 7/8 (–)
- Nominal output voltage: 55V DC
- Dimensions: 159× 51.8× 33.5 mm (H)
- Data connectors： Shielded RJ-45, EIA 568A and 568B
- Power connector： IEC c13 mains power input (not included)
- Operating ambient temperature： –10⁰C to +50⁰C
- Operating humidity： Maximum 90%, non-condensing
- Storage temperature： –20⁰C to +70⁰C
- Storage humidity： Maximum 95%, non-condensing
- Operating altitude： –300m to 3000m
- MTBF：200,000 hrs @ 25⁰C
注意
如果出现提示供电限制
在/boot/firmware/config.txt中添加usb_max_current_enable=1 即可
