產品說明0

※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！

Adafruit 1.44 Color TFT LCD Display／1.44吋 TFT LCD 彩色顯示屏（ada2088）帶MicroSD卡巢－ST7735R

Adafruit 1.44" Color TFT LCD Display with MicroSD Card breakout - ST7735R / Adafruit 1.44 英寸彩色 TFT LCD 顯示幕，帶 MicroSD 卡分線 - ST7735R

【Revision History】修訂記錄：

　　As of February 28, 2023 - we've updated this TFT breakout with an EYESPI connector to make cabling easier with an 18-pin FPC. We also used Adafruit Pinguin to make a lovely silkscreen. The board is otherwise the same size, pinout, and functionality.

影片（5:23~6:10）：https://youtu.be/zxqhKr-R724

［DESCRIPTION］：

　　This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!
是為任何專案添加小巧、多彩和明亮的顯示器的最佳方式。由於顯示器使用 4 線 SPI 進行通信，並具有自己的圖元可尋址幀緩衝器，因此它可以與各種微控制器一起使用。即使是非常小的，記憶體低，可用的引腳很少！

　The 1.44" display has 128x128 color pixels. Unlike the low cost "Nokia 6110" and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 16-bit color using our library code.
具有 128x128 彩色圖元。與低成本的「諾基亞 6110」和類似的 LCD 顯示器不同，這些顯示器是 CSTN 類型，因此色彩不佳且刷新速度慢，這款顯示器是真正的 TFT！TFT 驅動程式 （ST7735R） 可以使用我們的庫代碼顯示完整的 16 位顏色。

　The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as a ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full color bitmaps from a FAT16/FAT32 formatted microSD card. The microSD card is not included, but you can pick one up here.／
　　該分線板焊接了 TFT 顯示幕（它使用精緻的柔性電路連接器）以及一個超低壓差 3.3V 穩壓器和一個 3/5V 電平轉換器，因此您可以將其與 3.3V 或 5V 電源和邏輯一起使用。我們也有一點空間，所以我們放置了一個 microSD 卡座，這樣您就可以輕鬆地從 FAT16/FAT32 格式的 microSD 卡載入全彩色點陣圖。microSD 卡不包括在內，但您可以在此處選擇一張。

　Of course, we wouldn't just leave you with a datasheet and a "good luck!" - we've written a full open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as example code and a wiring tutorial. The code is written for Arduino but can be easily ported to your favorite microcontroller!
當然，我們不會只給你留下一份數據表和一句“祝你好運！”——我們已經編寫了一個完整的開源圖形庫，可以繪製圖元、線條、矩形、圓形、文本和位圖，以及示例代碼和接線教程。該代碼是為Arduino編寫的，但可以輕鬆移植到您最喜歡的微控制器上！

［TECHNICAL DETAILS］：

【Specifications】規格：

• 1.44" diagonal LCD TFT display
• 128x128 resolution, 18-bit (262,144) color
• 4 or 5 wire SPI digital interface
• Built-in microSD slot - uses 2 more digital lines
• 5V compatible! Use with 3.3V or 5V logic
• Onboard 3.3V @ 150mA LDO regulator
• 1 white LED backlight, transistor connected so you can PWM dim the backlight
• 1x12 header for easy breadboarding
• 4 x 0.9"/2mm mounting holes in corners
• Overall dimensions（外形尺寸）: 33m x 45mm x 7mm / 1.3" x 1.8" x 0.3"
• Mounting Holes（安裝孔）: 36mm x 36mm / 1.4" x 1.4"
• Weight: 10.6g
• Current draw is based on LED backlight usage: with full backlight draw is ~25mA

【舊款】

　

 【應用示意圖】：

相關文件

問與答