產品說明0
※本產品原廠代理從國外進口,有些交期較長,下訂前請詢問!
WM1302 Raspberry Pi Hat/樹莓派擴展板(113100022)
【Part List/清單】: |
WM1302 Pi Hat *1 GPS Antenna *1 |
M2.5*6mm Screw *8 |
M2.5*11.0mm Stud *4 |
M2.0*H6.0mm Screw *2 |
【Features/特徵】
- Standard Pi Hat form factor with 40 pins female pin header
- Raspberry Pi versions up to 4B compatible
- GPS Module embedded
- LoRaWAN authentication chip embedded
- 支持 Raspberry Pi 4 B
- 支持 Raspberry Pi 3 A+/B/B+
- 支持 Raspberry Pi 2 B
- 支持 Raspberry Pi A+/B+
- 支持 Raspberry Pi Zero/Zero W
[Application/應用]
- LoRaWAN Gateway device/hotspot development/網關設備/熱點開發
- Long-distance wireless communication application development/遠距離無線通信應用開發
- Any learning and experimentation based on Raspberry Pi/任何基於樹莓派的學習和實驗
- LoRa and LoRaWAN application learn and research/應用學習和研究
[說明]
WM1302 Pi HAT is an add-on expansion board designed specifically for attaching the WM1302 LoRaWAN Gateway module based on SX1302 to Raspberry Pi versions up to Raspberry Pi 4B. It also integrates the LoRaWAN authentication chip and GPS module./
WM1302 Pi HAT 是一款附加擴展板,專門設計用於將基於 SX1302 的 WM1302 LoRaWAN 網關模塊連接到最高 Raspberry Pi 4B 的 Raspberry Pi 版本。它還集成了LoRaWAN認證芯片和GPS模塊。
WM1302 module is a new generation of LoRaWAN gateway module with mini-PCIe form-factor. Based on the Semtech® SX1302 baseband LoRaWAN® chip, WM1302 unlocks the greater potential capacity of long-range wireless transmission for gateway products. It features higher sensitivity, less power consumption, and lower operating temperature than the previous SX1301 and SX1308 LoRa® chip./
WM1302 模塊是具有 mini-PCIe 外形的新一代 LoRaWAN 網關模塊。WM1302基於Semtech® SX1302基帶LoRaWAN®芯片,為網關產品釋放了更大的遠距離無線傳輸潛力。與之前的 SX1301 和 SX1308 LoRa® 芯片相比,它具有更高的靈敏度、更低的功耗和更低的工作溫度。
WM1302 Pi HAT supports the WM1302 module's mini-PCIe form-factor and can automatically configure the standard 52-pin golden fingers to the Raspberry Pi GPIO connector with a 40-pin compatible header. This simplifies the development process for users to integrate with Raspberry Pi. WM1302 Pi HAT works as an extension board and helps add the functionality of SX1302 on the Raspberry Pi, to support LoRaWAN and LoRa protocols for long-range wireless transmission. The GPS module integrated also enhances the accuracy of timing and location of the WM1302 module./
WM1302 Pi HAT 支持 WM1302 模塊的 mini-PCIe 外形尺寸,可以自動將標準 52 針金手指配置到具有 40 針兼容接頭的 Raspberry Pi GPIO 連接器。這簡化了用戶與 Raspberry Pi 集成的開發過程。WM1302 Pi HAT 用作擴展板,有助於在 Raspberry Pi 上添加 SX1302 的功能,以支持 LoRaWAN 和 LoRa 協議以實現遠程無線傳輸。集成的 GPS 模塊還提高了 WM1302 模塊的計時和定位精度。
WM1302 Pi HAT, together with the WM1302 Gateway Module and Raspberry Pi, can help construct your very completed and compacted LoRaWAN wireless communication gateways supporting smart agriculture, smart cities, and other IoT scenarios./
WM1302 Pi HAT 與 WM1302 網關模塊和樹莓派一起,可以幫助您構建非常完整和緊湊的 LoRaWAN 無線通信網關,支持智慧農業、智慧城市和其他物聯網場景。
[Hardware Overview]