產品說明0

※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！

SparkFun原廠 Qwiic OLED Display 顯示屏 (0.91 in, 128x32)（更新LCD－24606）

　　The SparkFun Qwiic OLED Display can display up to four lines of text and features 128x32 pixels in a small 0.91in. (diagonal) frame. As an OLED, this display does not have a backlight layer (unlike LCDs); therefore, it’s thinner, consumes less power, and has higher contrast.／SparkFun Qwiic OLED 顯示器可顯示多達四行文本，在 0.91 吋的小尺寸中具有 128x32 像素。 （對角線）框架。作為 OLED，此顯示器沒有背光層（與 LCD 不同）；因此，它更薄、功耗更低、對比度更高。

　　Thanks to an I2C command structure, the board's firmware maintains speed by updating only the part of the screen that changes. Computer graphics use this concept with "Dirty Rectangles" or "Bit blit" operations.

　　This version of the Qwiic OLED display includes two vertical Qwiic connectors on the back of the board to mount the board easily and keep the wires inside the enclosure. Note that the two mounting holes have also been moved to one side of the board.／此版本的 Qwiic OLED 顯示器在板背麵包括兩個垂直 Qwiic 連接器，可輕鬆安裝板並將電線保留在外殼內。請注意，兩個安裝孔也已移至板的一側。

　　The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.

　　Revision Change: For V1.1, we switched the horizontal Qwiic connectors to vertical. We also moved it to the back so that you can easily mount the board and keep the wires inside the enclosure. The vertical Qwiic connectors allows for a smaller board. The two mounting holes have also been moved to one side of the board.

修訂變更：對於 V1.1，我們將水平 Qwiic 連接器切換為垂直。我們還將它移到了後面，以便您可以輕鬆安裝電路板並將電線保留在外殼內。垂直 Qwiic 連接器允許使用更小的電路板。兩個安裝孔也已移至板的一側

• FEATURES

 

相關文件

問與答