產品說明0
※本產品原廠代理從國外進口,有些交期較長,下訂前請詢問!


Arduino Pro 328 - 5V/16MHz (DEV-10915)
中文介紹
產品名稱:Arduino Pro 控制器_328/5V_16Mhz
產品介紹:
核心升級_記憶容量x2_價格不變
Arduino Pro 控制器為模組大廠Sparkfun依據Arduino概念所推出的控制器,與Arduino Duemilanove 一樣為5V並使用16MHz bootloader,因此在使用Arduino IDE時必須選擇"Arduino Duemilanove"。
而Arduino Pro 與 Duemilanove 的差異點在於Arduino Pro 本身不具備與電腦端相連的轉接器,例如 USB介面或者RS232介面,本身只提供 TTL準位的TX、RX訊號輸出。這樣的設計較不適合初學者,初學者的入門 建議還是使用Arduino Duemilanove;對於熟悉Arduino的使用者,可以利用Arduino Pro 為你節省不少成本,你只需準備一組習慣使用的轉接器,如UsbtoTTL轉接器_5V,就可重複使用。
適合情形:需大量使用Arduino核心,並降低成本的使用者。
注意:Power Switch的部份容易損壞,使用時得小心。Spark正積極設計下一版本,下一版會做改善。
產品特色:
*不包含USB連接器
*支援 Auto-reset
*ATMEGA328核心 使用電壓5V / 頻率16MHz (external resonator _0.5% tolerance)
*具電流保護裝置
*容忍電壓:5-12V
*具保險絲重起裝置,避免短路造成的版子損害
*具電源開關
技術文件:
Eagle Files
Arduino Pro Hompage
Getting Started
Schematic
原文介紹 Description: It's blue! It's skinny! It's the Arduino Pro! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader in a super-sleek form factor that will fit easily into your next small project.
Arduino Pro does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of this lack of connectors and USB off board.
To keep things affordable and low profile, we've chosen to make the DC power jack footprint available, but not to populate it. We recommend running the board with a LiPo battery for better portability. Also, to keep the cost low, we made changes like using all SMD components and switching to a two layer PCB.
This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. In this latest version of the Arduino Pro we've also moved the FTDI headers back just a skoach so that the pins don't hang over the edge of the board. We've also populated it with a sturdier power selection switch.
Not sure which Arduino or Arduino-compatible board is right for you? Check out our Arduino Buying Guide!
Note: A portion of this sale is given back to Arduino LLC to help fund continued development of new tools and new IDE features.
Features:
- ATmega328 running at 16MHz external resonator
- USB connection off board
- 5V regulator
- Max 150mA output
- Over current protected
- Reverse polarity protected
- DC input 5V up to 12V
- Resettable fuse prevents damage to board in case of short
- Power select switch acts as on/off switch
Dimensions: 2.1x2.05" (53.34x52.08mm)
Documents:
Replaces: DEV-09219