產品說明0

※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！

MyoWare 2 Muscle Sensor Basic Kit（升級KIT-27921）肌肉傳感器基本套件

影片：https://youtu.be/d1oUHqPa35I

 

　　The MyoWare 2 Muscle Sensor Basic Kit, an Arduino-compatible, all-in-one electromyography (EMG) sensor kit that provides you with the bare minimum from the MyoWare 2 ecosystem to get started measuring and visualizing muscle activity.

【清單】： 

• 1x MyoWare 2 Muscle Sensor －主模組（10498）
  
• 1x MyoWare 2.0 LED Shield－LED模組（3843）
  
• 1x Reversible USB A to C Cable - 約1M／2M長－USB線（7102）
  
• 10x Disposable Surface EMG/ECG/EKG Electrode - 24mm－貼片10片（18361）
  
• 1x MyoWare 2.0 Reference Cable－貼片線（3820）
  
• 1x SparkFun Mini Screwdriver－螺絲刀

　　The MyoWare 2 Muscle Sensor Basic Kit is an Arduino-compatible, all-in-one electromyography (EMG) sensor kit that provides you with the bare minimum from the MyoWare 2 ecosystem to get started measuring and visualizing muscle activity. Simply snap on the MyoWare 2 LED Shield, add some EMG sensor pads, attach the sensor to a muscle group, and flex! The kit also includes a mini screwdriver for easy removal of shields, a USB A to C cable for recharging the 40mAh LiPo battery, and a MyoWare 2 Reference Cable to connect to large muscle groups

〔MyoWare 2〕主機： 

　Advancer Technologies' MyoWare 2 Muscle Sensor is an Arduino-compatible, all-in-one EMG sensor featuring a compact design and upgraded, reliable chipset.

【 Features & Specs】：

• Wearable Design
• Supply Voltage
  • Minimum： +2.27V
  • Typically： +3.3V to +5V
  • Maximum： +5.47V
• Input Bias Current
  • 250pA, max 1nA
• Reverse Polarity Protection
• Three Output Modes
  • Raw EMG
  • Rectified
  • Envelope
• Expandable via Shields
• MyoWare 2 Muscle Sensor Form Factor
  • 3x Female Snap Pins (Input Electrodes)
  • 3x Male Snap Pins (Power and EMG Envelope Output)
• LED Indicators
  • VIN
  • ENV
• Reference Electrode Jumper
• Specially Designed For Microcontrollers
• Adjustable Gain
• Board Dimensions
  • 37.57mm x 35.90mm (1.48” x 1.41”)

〔MyoWare 2.0 LED Shield〕（升級DEV-21869）
肌肉配件：LED 模組 Type-C

【FEATURES 】： 

• Input Voltage
  • 5V via USB Type C Connector
• Output Voltage (e.g. "VIN")
  • Nominal Voltage： 3.7V
  • Fully Charged： 4.2V
• Power Switch
• Built-in LiPo Battery
  • Rated Capacity： 40mAh
  • Nominal Voltage： 3.7V
  • Max Charge Current： 1C (40mA)
• MCP73831 Single Cell LiPo Charge IC
  • Charge Rate Set to 40mA
• MyoWare® 2.0 Muscle Sensor Form Factor
  • 3x Female Snap Pins (Power and EMG Envelope Output)
• LEDs
  • VIN
  • FULL
  • CHG
  • 2x 5-Segment Bars
• Board Dimensions
  • 46.15mm x 38.00mm (1.82” x 1.50”)

〔MyoWare 2.0 Reference Cable〕肌肉配件：貼片線（肌肉 連 貼片）

 

相關文件

問與答