※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
SparkFun LoRa Thing Plus - expLoRaBLE (WRL-17506)
參考影片:https://youtu.be/fTf7vAOQG7Y
DESCRIPTION
The SparkFun expLoRaBLE Thing Plus is a Feather-footprint development board with the NM180100 system in package (SiP), from Northern Mechatronics. Thanks to the NM180100, as well as the Ambiq Apollo3 microcontroller and the Semtech SX1262 LoRa transceiver, this Thing Plus is a highly integrated LoRa® module supporting both 868MHz and 915MHz bands and Bluetooth® Low Energy. On top of all else, the expLoRaBLE Thing Plus utilizes our handy Qwiic Connect System which means no soldering or shields are required to connect it to the rest of your system!
SparkFun expLoRaBLEBLE Thing Plus是一種羽毛式開發板，帶有來自Northern Mechatronics的NM180100封裝系統（SiP）。得益於NM180100，Ambiq Apollo3微控制器和Semtech SX1262 LoRa收發器，該Thing Plus是高度集成的LoRa®模塊，支持868MHz和915MHz頻段以及Bluetooth®Low Energy。最重要的是，expLoRaBLE Thing Plus利用了我們方便的Qwiic Connect System，這意味著無需焊接或屏蔽即可將其連接到系統的其餘部分！
The NM180100 SiP includes a Semtech SX1262 LoRa module paired with the Apollo3 MCU, which is used in the SparkFun Artemis Module. This provides the board with compatibility in the Arduino IDE, through our Apollo3 Arduino core. With both the BLE and LoRa capabilities of the expLoRaBLE you will be able to operate as a Bluetooth enabled LoRa node.
NM180100 SiP包括與Apollo3 MCU配對的Semtech SX1262 LoRa模塊，該模塊在SparkFun Artemis模塊中使用。通過我們的Apollo3 Arduino核心，這為開發板提供了與Arduino IDE的兼容性。借助expLoRaBLE的BLE和LoRa功能，您將能夠作為支持藍牙的LoRa節點進行操作。
You won't have to worry about how to hook up an appropriate antenna, either. The SparkFun expLoRaBLE Thing Plus has been equipped with a simple U.FL connector. With the U.FL you will have your choice of BLE and RF antennas to chose from but, personally, we recommend our Wide Band 4G LTE Internal FPC Antenna.
您也不必擔心如何連接合適的天線。SparkFun expLoRaBLE Thing Plus配備了一個簡單的U.FL連接器。使用U.FL，您可以選擇BLE和RF天線，但就個人而言，我們建議您使用寬帶4G LTE內部FPC天線。
The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.
SparkFun Qwiic Connect System是一個由I 2 C傳感器，執行器，護罩和電纜組成的生態系統，可使原型製作更快且更不容易出錯。所有支持Qwiic的板均使用通用的1mm間距4引腳JST連接器。這樣可以減少所需的PCB空間，並且極性連接意味著您不會將其鉤錯。
FEATURES
- Operating Voltage: 3.3V (regulated from 5V USB-C supply)
- Battery charging circuit (500ma charge rate)
- u.FL Antenna Connector - BLE & RF
- 24 GPIO
- Qwiic Connector for I2C
- Compatible with "The Things Network" LoRaWAN
- NM180100 SiP KEY SPECIFICATIONS
- LoRa®:
- 863-870 MHz (Europe)
- 902-928 MHZ (US)
- Maximum Transmit Power +22 dBm
- Receiver Sensitivity -147.6 dBm
- Bluetooth® 5 Low Energy:
- 2.402-2.480 GHz
- Maximum Transmit Power +2 dBm
- Receiver Sensitivity -95 dBm
- Architecture:
- Ambiq Apollo3 ARM® Cortex® M4 with FPU up to 96MHz
- Arduino IDE through SparkFun Apollo3 Arduino Core
- Flash: 1MB on-chip with external flash support
- RAM: 384 kB
- Security:
- ISO 7816 secure interface
- Secure Key Storage
- Secure Boot
- Secure OTA
- External Flash Inline Encryption/Decryption
DOCUMENTS
