※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
SparkFun GNSS Receiver Breakout - MAX-M10S (Qwiic) (GPS-18037)
DESCRIPTION
The SparkFun MAX-M10S Breakout is an ultra-low-power, high performance, miniaturized GNSS board that is perfect for battery operated applications that don't possess a lot of space, such as asset trackers and wearable devices. The MAX-M10S module from u-blox has an extremely low power consumption that is less than 25mW in continuous tracking mode.
SparkFun MAX-M10S Breakout是一款超低功耗、高性能、小型化的GNSS板，非常適合沒有大量空間的電池供電應用，如資產跟蹤器和可穿戴設備。u-blox 的 MAX-M10S 模組具有極低的功耗，在連續跟蹤模式下小於 25mW。
The on-board MAX-M10S GNSS receiver can receive signals from the GPS, GLONASS, BeiDou, and Galileo constellations. Thanks to the u-blox Super-S technology, the module offers improved RF sensitivity with small antennas and in non-line-of-sight scenarios. We've included an SMA connector for a sturdy connection when attaching an external antenna. The board is also equipped with an on-board rechargeable battery that provides backup power to the module's RTC. This reduces the time-to-first fix from a cold start (~24s) to a hot start (~1s). The battery will maintain RTC and GNSS orbit data without being connected to power for up to five hours. This increases precision and decreases lock time in battery operated devices without compromising GNSS performance.
機載MAX-M10S GNSS接收器可以接收來自GPS、GLONASS、北鬥和伽利略星座的信號。得益於 u-blox Super-S 技術，該模組通過小型天線和非視線場景提供更高的射頻靈敏度。我們包括一個SMA連接器，用於在連接外部天線時實現堅固的連接。該板還配備了板載可充電電池，為模組的RTC提供備用電源。這將首次修復時間從冷啟動 （~24s） 減少到熱啟動 （~1s）。電池將保持RTC和GNSS軌道數據，而無需連接到電源長達五個小時。這提高了電池供電設備的精度並縮短了鎖定時間，而不會影響GNSS性能。
Additionally, this u-blox receiver supports I2C which makes it perfect for Qwiic compatibility so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still broke out 0.1"-spaced pins in case you prefer to use a breadboard. For users that prefer to communicate over UART, we made sure to configure the UART pin grouping to an industry standard to ensure that it easily connects to a Serial Basic.
此外，這款 u-blox 接收器還支援 I2C，這使得它非常適合Qwiic相容性，因此我們不必用完我們珍貴的UART埠。利用我們方便的Qwiic系統，無需焊接即可將其連接到系統的其餘部分。但是，我們仍然突破了0.1“間距的引腳，以防您更喜歡使用麵包板。對於喜歡通過UART進行通信的用戶，我們確保將UART引腳分組配置為行業標準，以確保它可以輕鬆連接到串行基本。
U-blox based GNSS products are configurable using the popular Windows program called u-center. Plenty of different functions can be configured on the MAX-M10S: baud rates, update rates, spoofing detection, external interrupts, etc. We've also written an extensive Arduino library for u-blox modules to make reading and controlling the MAX-M10S over our Qwiic Connect System easy. Leave NMEA behind! Start using a much lighter weight binary interface and give your microcontroller (and its one serial port) a break. The SparkFun Arduino library shows how to read latitude, longitude, even heading and speed over I2C without the need for constant serial polling.
基於U-blox的GNSS產品可以使用稱為u-center的流行Windows程序進行配置。MAX-M10S可以配置許多不同的功能：波特率、更新率、欺騙檢測、外部中斷等。我們還為 u-blox 模組編寫了一個廣泛的 Arduino 庫，以便通過我們的 Qwiic 連接系統輕鬆讀取和控制 MAX-M10S。留下NMEA！開始使用重量更輕的二進位介面，並讓您的微控制器（及其一個串行埠）中斷。SparkFun Arduino庫顯示了如何讀取緯度，經度，甚至標題和速度2C，無需持續的串行輪詢。
Note: The I2C address of the MAX-M10S is 0x42 and is software configurable. A multiplexer/Mux is required to communicate to multiple MAX-M10S boards with the same address on a single bus. If you need to use more than one MAX-M10S with the same address consider using the Qwiic Mux Breakout.
注意：The I2MAX-M10S的C位址0x42，可通過軟體進行配置。需要一個多路複用器/多路複用器與單個總線上具有相同位址的多個MAX-M10S板進行通信。如果您需要使用具有相同位址的多個MAX-M10S，請考慮使用Qwiic多路複用器分線。
This product requires an antenna: Be sure to check out the related products/hookup accessories and pick a suitable SMA antenna for your project.
本產品需要天線：請務必查看相關產品/連接配件，併為您的專案選擇合適的SMA天線。
The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.
SparkFun Qwiic Connect System是I的生態系統2C 型感測器、執行器、遮罩和電纜，使原型設計更快，更不容易出錯。所有支援 Qwiic 的電路板均使用通用的 1mm 間距 4 針 JST 連接器。這減少了所需的PCB空間，並且極化連接意味著您不能將其錯誤地連接。
FEATURES
- Concurrent reception of GPS, GLONASS, Galileo and BeiDou
- 1.5m Horizontal Accuracy 1.5米水準精度
- 10Hz Max Update Rate 10Hz最大更新速率
- Time-To-First-Fix 首次修復時間 :
- Max Altitude 最高海拔 : 80,000m
- Max G: ≤4
- Max Velocity 最大速度 : 500m/s
- Velocity Accuracy 速度精度 : 0.05m/s
- Heading Accuracy 航向精度 : 0.3 degrees
- Time Pulse Accuracy 時間脈衝精度 : 30ns
- 3.3V VCC and I/O
- Current Consumption 電流消耗 : ~6mA to ~25mA (varies with constellations and tracking state 因星座和跟蹤狀態而異 )
- Software Configurable 軟體可配置
- Pulse Per Second
- Odometer
- Spoofing Detection
- External Interrupt
- Many others!
- Supports NMEA and UBX protocols over I2C or UART interfaces
- Dimensions 尺寸 (with SMA connector): 1.74" x 1.20"
- 2x Qwiic Connectors
DOCUMENTS
| 選購商品 |  | | | |
