產品說明0
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
SparkFun Top pHAT for Raspberry Pi (DEV-16653)
DESCRIPTION
Feeling fancy? Why not add a Top pHAT to your Pi pHAT stack? The SparkFun Top pHAT for Raspberry Pi is intended to be at the top of a pHAT stack so you won't find any pins for stacking on top of this board, but that's ok, because you will want to preserve your view of the 2.4" TFT display, six RGB LED's and three switches squeezed onto this board!
感覺花哨？為什麼不在您的 Pi pHAT 堆棧中添加 Top pHAT？用於 Raspberry Pi 的 SparkFun Top pHAT 旨在位於 pHAT 堆棧的頂部，因此您不會在該板的頂部找到任何用於堆疊的引腳，但沒關係，因為您會希望保留 2.4" 的視圖TFT 顯示屏、六個 RGB LED 和三個開關擠在這塊板上！
Can you use the SparkFun Top pHAT to prototype machine learning on your Raspberry Pi 4, NVIDIA Jetson, Google Coral or another single-board computer? Indubitably! The SparkFun Top pHAT supports machine learning interactions including voice control with on-board microphones & speaker, graphical display for camera control feedback, and uninhibited access to the RPi camera connector. Additionally, you can use the programmable buttons, joystick, and RGB LED for user defined I/O, dynamic system interaction, or system status displays.
您能否使用 SparkFun Top pHAT 在您的 Raspberry Pi 4、NVIDIA Jetson、Google Coral 或其他單板計算機上製作機器學習原型？無疑！SparkFun Top pHAT 支持機器學習交互，包括使用板載麥克風和揚聲器進行語音控制、用於攝像頭控制反饋的圖形顯示，以及對 RPi 攝像頭連接器的無限制訪問。此外，您可以將可編程按鈕、操縱桿和 RGB LED 用於用戶定義的 I/O、動態系統交互或系統狀態顯示。
Can you use it as an interface to introduce your project to the SparkFun Qwiic ecosystem? Indeed! In addition to all the previous features, we have also included a Qwiic connector to allow easy integration over I2C. Billions of combinations of Qwiic-enabled boards are available to you to expand upon the capabilities of the SparkFun Top pHAT.
您能否將其用作將您的項目引入 SparkFun Qwiic 生態系統的界面？的確！除了之前的所有功能之外，我們還包括一個 Qwiic 連接器，以便通過 I 2 C 輕鬆集成。您可以使用支持 Qwiic 的電路板的數十億種組合來擴展 SparkFun Top pHAT 的功能。
With all the I/O interaction on this board and the lack of soldering needed to get up and running, the SparkFun Top pHAT is the fundamental machine learning add-on for Raspberry Pi or any 2x20 GPIO SBC!
由於該板上的所有 I/O 交互以及啟動和運行所需的焊接，SparkFun Top pHAT 是 Raspberry Pi 或任何 2x20 GPIO SBC 的基本機器學習插件！
Note: If you're using the Top pHAT without another pHAT underneath, you will need to add a 20x2 header between your Pi 3 or Pi 4 and the Top pHAT.
注意：如果您使用的是 Top pHAT而下方沒有另一個 pHAT，則需要在 Pi 3 或 Pi 4 與 Top pHAT 之間添加一個20x2 接頭。
The I2C address of the Top pHAT is 0x71 and is hardware defined. A multiplexer/Mux is required to communicate to multiple Top pHAT sensors on a single bus. If you need to use more than one Top pHAT sensor consider using the Qwiic Mux Breakout.
Top pHAT 的I 2 C 地址為 0x71，由硬件定義。需要多路復用器/Mux 才能與單個總線上的多個 Top pHAT 傳感器通信。如果您需要使用多個 Top pHAT 傳感器，請考慮使用Qwiic Mux Breakout。
FEATURES
- A Raspberry Pi pHAT that focuses on user interaction with an SBC/RPi.
專注於用戶與 SBC/RPi 交互的 Raspberry Pi pHAT。
- Support for machine learning interactions
支持機器學習交互
- Voice control 語音控制 (microphones, speaker 麥克風、揚聲器 )
- Graphical display on 2.4" color TFT
2.4" 彩色 TFT 圖形顯示
- Two Programmable buttons for user defined I/O
兩個用於用戶定義 I/O 的可編程按鈕
- Programmable Joystick – for dynamic/interaction with system (GUI menus, robot driving).
可編程操縱桿——用於動態/與系統交互（GUI 菜單、機器人駕駛）。
- Programmable RGB LEDs – for system status, display, etc...
可編程 RGB LED——用於系統狀態、顯示等...
- Does not inhibit access to RPi camera or display connector
不禁止訪問 RPi 相機或顯示器連接器
- On/Off switch for Rpi
- Supports access to the SparkFun Qwiic ecosystem
支持訪問 SparkFun Qwiic 生態系統
- Intended to be at the top of a pHAT stack - no pins for stacking on top of this board. It’s the Top pHAT!
旨在位於 pHAT 堆疊的頂部 - 沒有用於堆疊在該板頂部的引腳。這是頂級 pHAT！
DOCUMENTS
示意圖
