產品說明0
OAK-FFC 3P 擴展板（不含攝像頭），適用DepthAI，可以接2個2通道 + 2個4通道MIPI
OAK-FFC-3P OAK USB3 Edition for DepthAI／適用於 DepthAI 的 OAK USB3 版本
【Package contains】：
- OAK-FFC 3P board
- Flexible flat cable, 15cm (3pcs)
- Power supply with international adapters
- Cable USB-CA-1m
Note: Camera modules are not included in the packaging. List of available cameras is here.
［注意］：不包含 1 個彩色模組化相機和 2 個用於視差深度的同步全域快門相機
＊如果您需要連接更多相機，請查看OAK-FFC-4P。
https://twarm.com/commerce/product_info.php?products_id=18028
【General information】：
- 2x 2-Lane MIPI interface
- 2x 4-Lane MIPI interface
- 5V power input via barrel jack
- USB 3.1 Gen 1 Type-C
- Interface for Luxonis OAK-SoM-Pro
- Pads for OAK-SoM-Pro 1.8V SPI
- Pads for OAK-SoM-Pro 3.3V SDIO
- Pads for OAK-SoM-Pro 1.8V Aux Signals (I2C, UART, GPIO)
- 5V Fan OR USB Type-C
- Design files produced with Altium Designer 20
【Specification】
- 3x OAK-FFC-OV9282 (DM0250TG_R1M1E1) mono camera module interfaces or
- 2x OAK-FFC-OV9282 (DM0250TG_R1M1E1) and 1x OAK-FFC-IMX378 (DM0249_R1M1E1) RGB camera module interface
- 5V power input via barrel jack
- USB 3.1 Gen 1 Type-C
- Interface for Luxnois BW1099 DepthAI SoM
- Pads for DepthAI SoM 1.8V SPI
- Pads for DepthAI SoM 3.3V SDIO
- Pads for DepthAI SoM 1.8V Aux Signals (I2C, UART, GPIO)
- 5V Fan OR USB Type-C
- Design files produced with Altium Designer 20
This repository contains open hardware designed by Luxonis, and meant to be used as a baseboard for the Luxonis BW1099 DepthAI SoM. The OAK-FFC-3P (DM1090FFC)baseboard has three FFC interfaces which allow for two 2-lane MIPI camera modules i.e. DM0250TG (stereo pair) and one DM0249 RGB camera module. There is also a chance to connect three 2-lane MIPI camera modules i.e. DM0250TG if DM0249 RGB camera module is not required.
Please note that only revision R1M1E1 and newer camera modules can be connected to the OAK-FFC-3P (DM1090FFC). With OAK-FFC-3P (DM1090FFC)we gained support for 22-pin RPi camera interface. For that you will need a FFC from Arducam, which converts 26-pin Luxonis camera pinout to 22 pin RPi camera pinout.
【Integrated IMU】
This OAK camera has an integrated BNO085, a 9-axis IMU (Inertial Measurement Unit). See IMU node for the API details on how to use it.
【Power consumption】：
Most of the power is consumed by the RVC2, so the power consumption mostly depends on the workload of the VPU：
- Base consumption + camera streaming： 2.5W - 3W
- AI subsystem consumption： Up to 1W
- Stereo depth pipeline subsystem： Up to 0.5W
- Video Encoder subsystem： Up to 0.5W
So the total power consumption can be up to ~5W if you are using all the features at 100% at the same time. To reduce the power consumption, you can reduce FPS of the whole pipeline - that way, subsystems won’t be utilized at 100% and will consume less power.
【Temperature】
The ambient operating temperature of RVC2 based devices is between -20°C and 50°C when fully utilizing the VPU. To find out more, see our operating temperature range documentation.
