產品說明1
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
樹莓派Pi3B+、4B配件：OKdo Lidar Module with Bracket(帶支架的激光雷達模塊LD06)
Okdo Lidar Module with Bracket Development Kit for LiDAR_LD06 Raspberry Pi SBC
The DTOF LiDAR_LD06 is an accessory tool provided for robotic device development or performance evaluation of sensor products, and for the educational purpose use of robotic device motion control and algorithm study,Users need to purchase a RPI SBC ( Raspberry PI3 A+/B+, Raspberry PI3 B, Raspberry PI 4B) to pair with DTOF module for use/development. (includes bracket & DTOF module & Uart cable & Assembly screws)
DTOF LiDAR_LD06是為機器人設備開發或傳感器產品性能評估提供的配套工具，用於機器人設備運動控制和算法研究的教育用途，用戶需要購買RPI SBC（Raspberry PI3 A+/B+、Raspberry PI3 B、Raspberry PI 4B) 與 DTOF 模塊配對使用/開發。(包括支架 & DTOF 模塊 & Uart 電纜 & 組裝螺絲)
Details
*Raspberry Pi not included* 不含樹莓派主板
The LiDAR LD06 has adopted TOF (time of flight) ranging technology and can measure distance according to the laser pulse time of flight within a detection distance of 12 metres.
The LD06 uses first class algorithm logic to achieve 360 degrees environmental detection, autonomous map building and obstacle detection.
With high-speed wireless data transmission and brushless motors, the LD06 can last for up to 10000 hours.
The LD06 can achieve high-frequency and high-precision distance measurement and accurate map building indoors and outdoors.
The LD06 is fully compatible with Raspberry Pi3 A+/B+, Raspberry Pi3 B and Raspberry Pi 4B
激光雷達LD06採用TOF（飛行時間）測距技術，可根據激光脈衝飛行時間在12米探測距離內測距。
- LD06採用一流的算法邏輯，實現360度環境檢測、自主地圖構建和障礙物檢測。
- LD06採用高速無線數據傳輸和無刷電機，使用壽命長達10000小時。
- LD06可實現室內外高頻高精度測距和精準地圖構建。
- LD06 與 Raspberry Pi3 A+/B+、Raspberry Pi3 B 和 Raspberry Pi 4B 完全兼容
【Specifications】:
- Distance measuring range: 0.02mm – 12m
- Scanning Frequency: 5-13 Hz
- Ranging accuracy: 30mm
- Ranging frequency: 4500Hz
- Scanning Angle: 360 degrees
- Size: 38 x 38 x 33 mm
【規格】：
- 距離測量範圍：0.02mm – 12m
- 掃描頻率：5-13 Hz
- 測距精度：30mm
- 測距頻率：4500Hz
- 掃描角度：360 度
- 尺寸：38 x 38 x 33 mm
