DETAILS

Arducam 13MP OBISP MIPI camera features onboard ISP (Image Signal Processor), it uses standard 15pin MIPI CSI-2 interface, and works seamlessly on Jetson Nano.
Arducam 13MP OBISP MIPI 攝像頭具有板載 ISP（圖像信號處理器），它使用標準 15pin MIPI CSI-2 接口，可在 Jetson Nano 上無縫工作。

 ★ NOTE
　　This camera relies on kernel drivers to work – one kernel version, one camera driver. Up or downgrading your OS leads to a kernel bump, and you’ll need to re-install a matching driver.
該相機依賴內核驅動程序工作——一個內核版本，一個相機驅動程序。升級或降級您的操作系統會導致內核崩潰，您需要重新安裝匹配的驅動程序。

　　The newest Raspberry Pi firmware does not support the OBISP MIPI driver anymore, it is not recommended to use this camera on Raspberry Pi. For the camera already purchased, we suggest you use it on Raspberry Pi firmware released before 2021 October.
最新的樹莓派固件不再支持 OBISP MIPI 驅動，不建議在樹莓派上使用此攝像頭。對於已經購買的相機，我們建議您在 2021 年 10 月之前發布的樹莓派固件上使用它

• Resolution: High Resolution 高分辨率
• Shutter Type: Rolling Shutter
• Color Type: Color
• IR Sensitivity: 650nm IR filter, visible light only. 650nm IR 濾光片，僅限可見光
• Output Interface 輸出接口: 2-Lane MIPI CSI-2
• Output Format 輸出格式 : YUV422, RGB888
• ISP Features: AWB, AE, Flip, Mirror, DeNoise, Gamma, Sharpness, Saturation, Contrast Digital Zoom, Digital Pan/Tilt, Speical Effects etc
  ISP 功能：AWB、AE、翻轉、鏡像、降噪、伽瑪、銳度、飽和度、對比度數字變焦、數字平移/傾斜、特殊效果等
• Platform Support 平台支持 :  Jetson Nano

 

 

• Sensor Type: 13MP AR1335
• Pixel Size: 1.1um x 1.1um
• Resolution: 4160×3120
• Optical Size: 1/3″
• Lens Spec: M12 Low distortion lens 低畸變鏡頭, EFL: 4.73mm, FoV(H): 50°, F/NO:2.2
• Max Data Rate: 1.2Gbps/laneFrame Rate: 7fps@4160×3120, 11fps@3264×2448/3840×2160, 24fps@2560×1440, 30fps@1600×1200/1920×1080/640×480/320×240
• Responsivity: 4.7k e/lux-sec
• SNR(Max): 37dB
• Dynamic Range: 69dB
• Power Consumption: 270mW
• Temperature Range: -10 ~ 70 degrees
• Camera Driver: V4L2 Compliant driver for Jetson Nano
• Board Size: 38mm x 38mm
• Powerline Frequency:  50Hz, fixed