產品說明2
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
Sparkfun原廠 MyoWare 2.0.4 Muscle Sensor （DEV-18977改21265）肌肉傳感器
影片：https://youtu.be/d1oUHqPa35I
修訂變更： V2.0.4 的以下變更包括：
- PCB板厚度增加。／PCB board thickness increased.
- 用於按扣連接器按鈕的 NPTH。／NPTH for snap connector buttons.
- 更新了帶槽的按扣連接器按鈕的佔用面積，以改善清潔效果。／Updated footprint for snap connectors buttons with slots for improved cleaning.
- 更新了參考引腳跳線墊的大小。／Updated size of reference pin's jumper pad.
Using our muscles to control things is the way that most of us are accustomed to doing it. We push buttons, pull levers, move joysticks... but what if we could take the buttons, levers and joysticks out of the equation and control it with our muscles? The MyoWare 2.0 Muscle Sensor is an Arduino-compatible, all-in-one electromyography (EMG) sensor from Advancer Technologies that allows you to do just that! The MyoWare 2.0 Muscle Sensor has been redesigned from the ground up with a new easy-to-use, compact design and upgraded with the latest and greatest chipset improving sensor performance and reliability. The innovative snap connector system eliminates the need to solder connections for the MyoWare 2.0 ecosystem. It's that easy: stick on a few electrodes (not included), read the output voltage and flex some muscles!
使用我們的肌肉來控制事物是我們大多數人習慣的方式。 我們按下按鈕、拉桿、移動操縱桿……但是如果我們可以將按鈕、操縱桿和操縱桿從方程式中剔除，並用我們的肌肉來控制它呢？ MyoWare® 2.0 肌肉傳感器是 Advancer Technologies 的一款兼容 Arduino 的一體化肌電圖 (EMG) 傳感器，可讓您做到這一點！ MyoWare 2.0 肌肉傳感器經過重新設計，採用全新的易於使用、緊湊的設計，並使用最新最好的芯片組進行了升級，提高了傳感器的性能和可靠性。 創新的卡扣式連接器系統無需為 MyoWare 2.0 生態系統焊接連接。 就這麼簡單：貼上幾個電極（不包括在內），讀取輸出電壓並鍛煉肌肉！
The MyoWare 2.0 Muscle Sensor measures muscle activity through the electric potential of the muscle, commonly referred to as surface electromyography (EMG or sEMG for short). When your brain tells your muscle to flex, it sends an electrical signal to your muscle to start recruiting motor units (the bundles of muscle fibers that generate the force behind your muscles).
MyoWare 2.0 肌肉傳感器通過肌肉的電位測量肌肉活動，通常稱為表面肌電圖（EMG 或簡稱 sEMG）。 當你的大腦告訴你的肌肉彎曲時，它會向你的肌肉發送一個電信號，以開始募集運動單位（在你的肌肉後面產生力量的肌肉纖維束）。
The harder you flex, the more motor units are recruited to generate great muscle force. The greater the number of motor units, the more the electrical activity of your muscle increases. MyoWare 2.0 Muscle Sensor will analyze the filtered and rectified electrical activity of a muscle and output a signal (0-VIN volts, where VIN signifies the voltage of the power source) that represents how hard the muscle is being flexed.
你彎曲得越用力，就會有越多的運動單位被招募來產生強大的肌肉力量。 運動單位的數量越多，肌肉的電活動就越多。 MyoWare 2.0 肌肉傳感器將分析肌肉的濾波和整流後的電活動，並輸出一個信號（0-VIN 伏，其中 VIN 表示電源的電壓），表示肌肉的彎曲程度。
The MyoWare 2.0 Muscle Sensor builds upon its previous wearable design that allows you to attach biomedical sensor pads directly to the board itself, getting rid of those pesky cables. This board includes a single-supply voltage of +3.3V to +5V, three output modes, reverse polarity protected power pins, and indicator LEDs. Additionally, we have developed a few shields (such as the Cable, Power, and LED shields to name a few) that can attach to the MyoWare 2.0 Muscle Sensor to help increase its versatility and functionality! The muscle sensor’s snap connector system makes it easier to stack shields together. The top side connectors link to power and the sensor’s EMG envelope output while the bottom side links to the input electrodes.
MyoWare 2.0 肌肉傳感器建立在其先前的可穿戴設計之上，允許您將生物醫學傳感器墊直接連接到電路板本身，擺脫那些討厭的電纜。 該板包括 +3.3V 至 +5V 的單電源電壓、三種輸出模式、反極性保護電源引腳和 LED 指示燈。 此外，我們還開發了一些可以連接到 MyoWare 2.0 肌肉傳感器的防護罩（例如電纜、電源和 LED 防護罩等等），以幫助提高其多功能性和功能性！ 肌肉傳感器的卡扣連接器系統可以更輕鬆地將防護罩堆疊在一起。 頂部連接器連接到電源和傳感器的 EMG 包絡輸出，而底部連接到輸入電極。
Measuring muscle activity by detecting its electric potential has traditionally been used for medical research. However, with the advent of ever shrinking yet more powerful microcontrollers and integrated circuits, EMG circuits and sensors have found their way into all kinds of control systems such as video games, robotics, and prosthetics! Biomedical sensor pads can be found in the Recommended Products section below to be purchased separately.
通過檢測其電勢來測量肌肉活動傳統上已用於醫學研究。 然而，隨著不斷縮小但功能更強大的微控制器和集成電路的出現，EMG 電路和傳感器已經進入各種控制系統，如視頻遊戲、機器人和假肢！ 生物醫學傳感器墊可以在下面的推薦產品部分中找到，需要單獨購買。
Note: MyoWare and the Muscle Sensor are not intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation treatment, or prevention of disease, in a man or other animals. 注意： MyoWare 和 肌肉傳感器 不適用於診斷人類或其他動物的疾病或其他狀況，或用於治愈、緩解治療或預防疾病。
The MyoWare® 2.0 ecosystem consists of shields that easily interface with the MyoWare® 2.0 Muscle Sensor, which is a low-cost, Arduino-compatible, all-in-one electromyography (EMG) sensor from Advancer Technologies. The innovative connector system allows users to easily snap shields together with a compact low profile and connect to a microcontroller's analog input to measure raw, filtered, and rectified electrical activity of a target muscle. This eliminates the need to solder connections between boards.
MyoWare® 2.0 生態系統由可輕鬆與 MyoWare® 2.0 肌肉傳感器接口的防護板組成，這是一款來自 Advancer Technologies 的低成本、與 Arduino 兼容的一體化肌電圖 (EMG) 傳感器。創新的連接器系統使用戶可以輕鬆地將防護罩與緊湊的薄型連接在一起，並連接到微控制器的模擬輸入，以測量目標肌肉的原始、濾波和整流電活動。這消除了在板之間焊接連接的需要。
This product is a collaboration with Brian Kaminski from Advancer Technologies. A portion of each sales goes back to them for product support and continued development.
該產品是與 Advancer Technologies 的 Brian Kaminski 合作推出的。每次銷售的一部分都會返回給他們，以獲得產品支持和持續開發。
