產品說明1
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
MI:pro Mountable Case for micro:bit V2 (PRT-17868)
SparkFun原廠 micro:bit V2 壓克力外殼 C款 (不含主板BBC 1、2代) (PRT-17868) 可壁掛
參考影片: https://youtu.be/57hMKPQNaRM
FEATURES
- Dimensions:
- 長度 Length (minus the mounting brackets on the side): 65mm.
- 長度 Length (with the mounting brackets on the side): 91mm.
- 寬度 Width: 37mm.
- 深度 Depth (without screws 不帶螺絲 ): 9mm.
- 深度 Depth (with screws 帶螺絲 ): 14mm.
- Provides excellent protection to the BBC micro:bit whilst allowing access to the bottom pins.
- Full access to the A and B buttons on the BBC micro:bit.
- The mounting points allow you to fix the micro:bit to a surface for sturdy and more permanent installations.
- Full access to pins and connections including the micro USB connector.
- Clear case material shows the on-board LEDs in perfect clarity.
- The case is compatible with versions 1 and 2 of the micro:bit.
該外殼與micro：bit的版本1和2兼容。
DESCRIPTION
The Mountable MI:pro is a simple and compact protective case for the micro:bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro:bit V1 and the micro:bit V2. These cases feature a three-layer construction style with ability to wall-mount the whole assembly onto any surface you want while still providing access to all buttons and ports on the micro:bit. Though these cases do feature wall-mountable tabs, the biggest benefit of using a case is to not accidentally short out the pads on the back of the micro:bit.
可安裝的MI：pro是micro：bit的簡單緊湊的保護套。該保護套經過專門設計，考慮了便攜性和擴展性，並且與原始的micro：bit V1和micro：bit V2兼容。這些外殼具有三層構造樣式，能夠將整個組件壁掛在所需的任何表面上，同時仍可訪問micro：bit上的所有按鈕和端口。儘管這些外殼確實具有可壁掛的凸耳，但是使用外殼的最大好處是不會意外地使micro：bit背面的焊盤短路。
Construction is simple, requiring only a small flathead screwdriver, and involves layering each plate on top of one another around the micro:bit and screwing it into place. Luckily, the MI:pro case enables easy access to the edge pins at the bottom of the micro:bit, allowing it to still be plugged into an edge connector found on many of our carrier boards. The only board that cannot be used in conjunction with the MI:pro case is the SparkFun gamer:bit due to its edge connector being located in the center of the board.
施工很簡單，只需要一把小平頭螺絲刀，就可以將每個板圍繞微型鑽頭一層一層地疊好並將其擰緊到位。幸運的是，MI：pro盒可輕鬆訪問micro：bit底部的邊緣引腳，從而仍可將其插入我們許多載板上的邊緣連接器中。不能與MI：pro外殼一起使用的唯一板子是SparkFun gamer：bit，因為其邊緣連接器位於板子的中央。
Note: The MI:pro case only includes the parts found in the Includes Tab. This case does NOT include a micro:bit, power source or mounting screws. These items will need to be purchased separately.
注意： MI：pro盒僅包含在“包含”選項卡中找到的零件。這種情況下不包括電源或安裝螺絲。這些物品將需要單獨購買。
