XBee Pro 900 XSC RPSMA (WRL-11664)TEL043/XB024
DiGi標題...
XBee PRO XSC S3B, 900 MHz, 250 mW, RPSMA ant connector, 9600 bps
Digi Part : XBP9B-XCST-001
Description: The XBee-PRO XSC 900 MHz RF module features two times the throughput and 20 times less current draw than the previous XSC module, making it ideal for long-range sensor applications. The RF module features an ADF7023 transceiver from Analog Devices, delivering distances up to 28 miles Line-of-Sight with the right antenna, along with low power consumption, drawing less than 2.5 uA in power down.
The latest XBee-PRO XSC (S3B hardware) is firmware compatible with the legacy 9XStream® and the legacy XBee-PRO XSC modules.
XBee-PRO XSC modules operate within the ISM 900 MHz frequency band. The modules are optimized for use in US and Canada.
Not sure which XBee module or accessory is right for you? Check out our XBee Buying Guide!
Note: Due to manufacturer's restrictions in other countries, we can only ship these to the USA and Canada. Sorry world!
Features:
- Simplified AT command set
- Over-the-air compatible with legacy 9XStream and XSC products
- 20 times less current draw than previous XSC module
- Superior outdoor LOS range
- Pin-compatible with existing through-hole XBee RF modules
- 10 Kbps data rate
- Up to 2000 ft Indoor range with high-gain antenna
- Up to 24 dBm (250 mW) Transmit Power
- Receiver Sensitivity of -109 dBm at 9600 baud
- Supply Voltage: 2.4 to 3.6 VDC
- 215 mA Transmit Current
- 26 mA Receive Current
- 2.5 uA Sleep Current
- External Antenna Required
Documents:
