產品說明0

Arducam CMOS MT9J003 1/2.3-Inch 10MP Color Camera Module

Arducam CMOS MT9J003 1/2.3 英寸 10MP 彩色相機模塊

Arducam CMOS MT9J003 1/2.3-Inch 10MP Color Camera Module

 

Arducam CMOS MT9J003 1/2.3 英寸 10MP 彩色相機模塊

 

Package Including 清單

•  1 pcs Arducam CMOS MT9J003 1/2.3-Inch 10MP monochrome Camera Module 黑白相機模塊

Item Description

　　The MT9J003 camera module features Aptina’s breakthrough low-noise CMOS imaging technology that achieves near-CCD image quality (based on signal-to-noise ratio and low-light sensitivity) while maintaining the inherent size, cost, and integration advantages of CMOS. It incorporates the color version of the MT9J003 sensor on board.
　　MT9J003 攝像頭模塊採用 Aptina 突破性的低噪聲 CMOS 成像技術，可在保持 CMOS 固有的尺寸、成本和集成優勢的同時實現接近 CCD 的圖像質量（基於信噪比和低光靈敏度）。 它集成了板載 MT9J003 傳感器的彩色版本。

　　This camera module can be used together with Arducam USB shield for Windows, Linux and Raspberry Pi.
    此相機模塊可與適用於 Windows、Linux 和 Raspberry Pi 的 Arducam USB shield 一起使用。

 

Features

• 1/2.3" optical format 光學格式
  
• Color Bayer pattern
• 10MP 3856 x 2764 MT9J003 sensor 全局快門傳感器
  
• 1.67 x 1.67 um Pixel size 像素大小
  
• 7.5fps at full resolution 全分辨率
  
• 0.31V/lux-sec responsivity 響應度
  
• 65.2dB dynamic range 動態範圍
  
• single 3.3V power input 電源輸入
  
• Parallel camera interface 並行攝像頭接口
  
• Default M12 mount 4.2mm LS-18023 lens 固定鏡頭

 

Optical format 1/2.3−inch (4:3) Active pixels and imager size 3856H x 2764V (Entire sensor) 3664H x 2748V (4:3, Still mode) 3840H x 2160V (16:9, Video mode) Pixel size 1.67 x 1.67μm Color filter array RGB Bayer pattern or Monochrome ADC resolution 12−bit, on−chip Responsivity 0.31 V/lux-sec (550nm) Dynamic range 65.2dB SNRMAX 34dB Frame Rate Still mode, 4:3 (3664H x 2748V) @7.5fps Preview mode VGA • 30 fps with binning • 60 fps with skip2bin2 1080p mode @30fps

 

Application:

• 數碼攝像機  Digital video cameras
  
• 數碼相機  Digital still cameras
  
• 工業相機  Industrial camera
  
• 醫療相機  Medical camera
  
• 顯微鏡相機  Microscopy camera

產品圖片

相關文件

問與答