產品說明0
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
2Mp Megapixel OV2640 CMOS 1/4 inch Camera Module with LS-4011 M12 Mount lens
DETAILS
Item Description:
ArduCAM team now released a M12 mount camera module with OV2640 image sensor from Omnivision. With the benefit of M12 mount lens holder, user can change different lenses like wide angle lenses according to their application. Also the camera module provide a ArduCAM standard pin outs with 0.1”(2.54mm) pin pitch, user can change different modules while keep the pin outs the same.
ArduCAM 團隊現在發布了來自 Omnivision 的帶有OV2640圖像傳感器的 M12 安裝攝像頭模塊。憑藉 M12 卡口鏡頭支架的優勢，用戶可以根據自己的應用更換不同的鏡頭，如廣角鏡頭。此外，相機模塊提供了一個 ArduCAM 標準引腳，引腳間距為 0.1”(2.54mm)，用戶可以在保持引腳相同的情況下更換不同的模塊。
The OV2640 CAMERACHIP™ image sensor is a low voltage CMOS device that provides the full functionality of a single-chip UXGA (1632x1232) camera and image processor in a small footprint package. The OV2640 provides full-frame, sub-sampled, scaled or windowed 8-bit/10-bit images in a wide range of formats, controlled through the Serial Camera Control Bus(SCCB) interface. This product has an image array capable of operating at up to 15 frames per second (fps) in UXGA resolution with complete user control over image quality, formatting and output data transfer. All required image processing functions, including exposure control, gamma,white balance, color saturation, hue control, white pixel canceling, noise canceling, and more, are also programmable through the SCCB interface. The OV2640 also includes a compression engine for increased processing power. In addition, OmniVision CAMERACHIP sensors use proprietary sensor technology to improve image quality by reducing or eliminating common lighting/electrical sources of image contamination, such as fixed pattern noise, smearing, etc., to produce a clean,fully stable color image.
OV2640 CAMERACHIP™ 圖像傳感器是一種低電壓 CMOS 器件，可在小尺寸封裝中提供單芯片 UXGA (1632x1232) 相機和圖像處理器的全部功能。OV2640 提供各種格式的全幀、二次採樣、縮放或窗口化 8 位/10 位圖像，通過串行相機控制總線 (SCCB) 接口進行控制。該產品具有一個圖像陣列，能夠在 UXGA 分辨率下以高達每秒 15 幀 (fps) 的速度運行，並且用戶可以完全控製圖像質量、格式和輸出數據傳輸。所有必需的圖像處理功能，包括曝光控制、伽瑪、白平衡、色彩飽和度、色調控制、白像素消除、噪聲消除等，也可以通過 SCCB 接口進行編程。OV2640 還包括一個壓縮引擎，以提高處理能力。此外，OmniVision CAMERACHIP 傳感器使用專有傳感器技術通過減少或消除圖像污染的常見照明/電源（例如固定圖案噪聲、拖尾等）來提高圖像質量，從而產生乾淨、完全穩定的彩色圖像。
Features:
- M12 mount lens holder, more lens options
- 1/4” sensor size
- High sensitivity for low-light operation
- Standard SCCB interface
- Output support for Raw RGB, RGB (RGB565/555), GRB422, YUV (422/420) and YCbCr (4:2:2) formats, JPEG compression formats
- Supports image sizes: UXGA, SXGA, SVGA, and any size scaling down from SXGA to40x30
- Automatic image control functions including Automatic Exposure Control (AEC),
- Automatic Gain Control (AGC), Automatic White Balance (AWB), Automatic Band
- Filter (ABF), and Automatic Black-Level Calibration (ABLC)
- Image quality controls including color saturation, gamma, sharpness (edge
- enhancement), lens correction, white pixel canceling, noise canceling, and 50/60 Hz
- luminance detection
- Low operating voltage for embedded portable apps
- Board Size: 30.5x30.5mm
- Mounted with LS-4011 M12 Lens (updated from HX-27227 ／從 HX-27227 更新)
Package including:
- 1pcs 2Mp Megapixel OV2640 CMOS 1/4 inch Camera Module with LS-4011 M12 Mount lens
- 1 件 2Mp 百萬像素 OV2640 CMOS 1/4 英寸相機模塊，帶 LS-4011 M12 安裝鏡頭
