The Fluke CNX 3000 wireless digital multimeter can operate independently as a fully functional DMM. However its total advantage is that it can communicate with and display real time readings from up to 3 Fluke CNX 3000 Series Wireless Modules. Each module can be located up to 20 metres (66 feet) away and can be numerically identified with the multimeter. You can identify upto 10 modules using the multimeter then log or display the readings from any 3 of them plus the DMM reading. Compatible with the following Fluke CNX 3000 Series wireless modules and accessories: AC Voltage Module AC True-RMS Current Clamp Module iFlex True-RMS AC Current Clamp Module K-Type Temperature Module PC USB Wireless Adapter The Fluke CNX Wireless test tools (modules) can also communicate with Ti100 and TiR100 Series Thermal Imagers just as they do with the CNX 3000 digital multimeters allowing you to not only see thermal images but take measurements wirelessly from the CNX multimeter and modules and display the results on your camera.
DMM measurement includes AC Voltage, DC Voltage, continuity, resistance, diode test and capacitance, AC and DC current and frequency Min / max recording Four line LCD display with a 4 Hz update rate Powered by three AA alkaline batteries (supplied) with a life of 300 hours minimum RF communication uses the 2.4 GHz ISM band with a range of 20 metres IP54 ingress protection rating
Safety: Fluke CNX meets Measurement Category 1000 V CAT III and Category IV 600 V safety standards: AC current clamp 600 V CAT III; AC Voltage Module and iFlex Clamp Meters 600 V CAT IV / 1000 CAT III Electromagnetic compatibility: EN 61326-1:2006, EN 61326-2-2:2006. ETSI EN 300 328 V1.7.1:2006, ETSI EN 300 489 V1.8.1:2008, FCC Part 15 Subpart C Sections 15.207, 15.209, 15.249, FCCID : T68-FWCS IC:6627A-FWCS Safety compliance: US ANSI: ANSI/ISA 61010-1 / (82.02.01): 3rd edition CSA: CAN/CSA-C22.2 No 61010-1-12: 3rd edition CE European: IEC/EN 61010-1:2010 Certifications: CSA, FCC, CE
1 x TC175 test leads 1 x A175 crocodile clips 3 x AA alkaline batteries
The Fluke CNX 3000 Series is a brand new and unique suite of wireless test tools to allow you to see live measurements from up to 10 remotely located measurement modules. The CNX Series consists of: Digital Multimeter AC Voltage Module AC True RMS Current Clamp Module iFlex True RMS AC Current Module K-Type Temperature Module USB PC Adapter These items are available individually and we also supply dedicated kits. The Fluke CNX 3000 Wireless multimeter can display readings from any three 3 wireless modules, plus the meter measurement, at the same time from up to 20 meters away, on one screen. Add a laptop or PC and review ten measurements at once, remotely. The wireless enabled modules are dedicated to measure AC voltage, temperature and AC current (choose a standard clamp or iFlex current loop to measure AC current). Mix and match modules to suit your unique measurement needs. The measurements are wirelessly transmitted using the 2.4GHz ISM band to the CNX 3000 multimeter and/or to a PC via the Fluke CNX P3000 USB wireless PC adaptor for live viewing. Each placed module can be identified with the multimeter or PC allowing you to choose the module and view the live readings you need.
