CC2652p Dongle，Zigbee2MQTT、ZHA Home Assistant 官方認證
Zigbee2mqtt網關cc2652p Dongle ZHA Home Assistant 官方認證
OVERVIEW：
Tiny USB stick or dongle, adapter of development board for 2.4G multiprotocol RF.
DIMENSION尺寸：5.5cm * 2.3cm * 1.3cm
［FEATURES］特徵：
１．2.4GHz multiprotocol RF development board（OpenThread,Zigbee,BLE,IEEE802.15.4,6LoWPAN and proprietary）based on TI CC2652P1FRGZR chip
２．Communicates with the host computer via the common CH340E USB-UART bridge
３．cJTAG debug header, flashed firmware or debug with JTAG
４．Self-programming via the TI serial bootloader with bootloader bit enabled
５．SMA antenna port for an external antenna with personal choice
６．General LEDs（Red--Power on indication Green--DIO7 Blue--DIO6）
７．General Buttons（BTN1--DIO13<Bootloader-enable> BTN2--DIO14 RST--nRESET）
８．IO breakouts with 2.0mm pitch holes for connecting peripheral device
９．Low power LDOs
１０．ESD protections with USB interface
１１．easy to use with Koenkk's zigbee2mqtt
１２．easy to use with TI's OpenThread border router
［Synology driver］：
- https://github.com/chenzhuoyu/dsm7-ch341
［BOM］：
- 1. Inductor -- muRata
- 2. Capacitor -- muRata/AVX/Samsung
- 3. Resistors -- FH
- 4. Crystal oscillator -- TXC/TKD
- 5. LEDs -- Orient
［FLASHING］：
１．Via USB interface with bootloader enable：
Ａ．flash firmware using TI Flash Programmer 2：
press BTN1 and keep holding --> click the Reset button --> wait a few seconds --> release BTN1 button --> Flash programmer2 operation
Ｂ．flash firmware using cc2538-bsl.py
２．Via cJTAG interface with TI debugger tools
［FIRMWARE］：
The dongle comes stitched with coordinator firmwares, you can flash it with router or other types firmware via USB with bootloader enable condition.
［TESTING］：
１．RF performance testing
２．Frequency spectrum testing
３．Function testing
４．QC pass
