產品說明5
CJMCU FT232H 高速多功能USB to JTAG UART/FIFO SPI/I2C 模塊
MCU FT232H 高速多功能 USB to JTAG UART/FIFO IIC I2C 模塊外置存儲器
驅動程序下載地址：https://pan.baidu.com/s/1x9Zwpr35d-R0rPVFrg7cAw
【Typical Applications】：
- ＊ Single chip USB to UART (RS232, RS422 or RS485)
- ＊ USB to FIFO
- ＊ USB to FT1248
- ＊ USB to JTAG
- ＊ USB to SPI
- ＊ USB to I2C
- ＊ USB to Bit-Bang
- ＊ USB to Fast Serial Interface
- ＊USB to CPU target interface (as memory)
CJMCU-FT232H is a single channel USB 2.0 Hi-Speed (480Mb/s) to UART/FIFO IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces. The FT232H has the following advanced features:
- ＊ Single channel USB to serial / parallel ports with a variety of configurations.
- ＊ Entire USB protocol handled on the chip. No USB specific firmware programming required.
- ＊ USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible.
- ＊ Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI (MASTER) or bit-bang) design.
- ＊ UART transfer data rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter).
- ＊ USB to asynchronous 245 FIFO mode for transfer data rate up to 8 Mbyte/Sec.
- ＊ USB to synchronous 245 parallel FIFO mode for transfers upto 40 Mbytes/Sec
- ＊ Supports a proprietary half duplex FT1248 interface with a configurable width, bi-directional data bus (1, 2, 4 or 8 bits wide).
- ＊ CPU-style FIFO interface mode simplifies CPU interface design.
- ＊ Fast serial interface option.
- ＊ FTDI's royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
- ＊ Adjustable receive buffer timeout.
