洋天科技洋天科技
公司簡介訂購方式匯款確認檔案下載 聯絡我們保固說明訂單查詢討論區
電子郵件:

密碼:

忘記密碼
加入會員
  首頁 | 原廠 Arduino® | 特殊服務設計 | 轉接座及轉接板/麵包板 | 開發板/燒錄器/模擬器 | 相容 For Arudino® 週邊及配件 | OKdo系列 | Saleae 系列 | Adafruit 系列 | ArduCam 系列 | Camera 攝像頭 | ROCK 系列 | Debix系列開發板 | Raspberry Pi 樹莓派 | Banana Pi 香蕉派 | BeagleBone 狗骨頭 | M5Stack系列 | Micro:bit (BBC)系列 | NVIDIA Jetson Nano系列 | Pololu 系列 | Pycom 系列 | Seeed 系列 | Sparkfun 系列 | WeMos 系列 | 傳感器 | Cubieboard/CubieTruck系列 | Firefly 系列 | Microduino系列 | Orange Pi 香橙派 | PCB板 | PLC 系列 | Robot 機器人 | UDOO 系列 | RedBearLab 系列 | LattePanda系列 | LittleBits 系列 | Libelium 系列 | Luxonis 相機系列 | PCduino | RobotElectronics 系列 | MageDok 顯示屏 | LCD/LCM/TFT/LVDC | Dimension Engineer 系列 | 通訊模組 | 影音器材(含轉換器) | 線材/連結器/轉換器 | 測量儀器 | 馬達/馬逹控制器/電源模組 | 其他 | 焊接/維修工具 | IC零件 | LED燈-裝飾燈 | 工作站迷你電腦 mini PC | 擴大器 | 雕刻機 | 電池 | 電腦周邊 | 檢定考套件 | 停售商品
  首頁 » 商品目錄 » Adafruit 系列 » Breakout Boards 模組 » 8890
商品搜尋 進階
 |  購物車內容  |  結帳   
商品分類
  *新版 STEMMA QT / Qwiic接頭系列
  *轉接板
  Sensors/Parts
  *Feather 系列
  *FLORA 系列&配件
  Arduino
  BeagleBone 狗骨頭
  Development Boards
  Kits 套件 套餐
  LCDs & Displays 屏
  SMT SMD 轉板 轉接座
  Bluetooth 藍芽
  Breakout Boards 模組
    Batteries 電池/Power 電壓
    LED 矩陣
    Light 光感 光敏 光線...
    Motor Driver 驅動板
    Sound 麥克風...
    Temperature 溫度 濕度...
    Touch 觸碰 觸摸
    WiFi板
    帶 USB頭 模組
    測氣體
  Buttons 按鍵& Switches搖桿
  Cameras 攝像頭
  CNC 舵機 馬達 零件
  EL Wire/Tape/Panel
  Laser 雷射激光
  LEDs 燈
  Materials 導電
  NeoPixel 系列 LE燈燈
  Photon 系列&配件
  Power 電源、電池...
  RFID / NFC
  Robotics
  停產 停售 DISCONTINUED
  SIM800系列(台灣不能用)
Arduino
Pololu
Seeed
Sparkfun
robot-electronics
dimensionengineering
libelium
adafruit
udoo
redbearlab
Arducam
goembed
Saleae
okdo
服務台
公司簡介
退換貨服務
訂購方式
聯絡我們
匯款確認
[<< 前一頁]  瀏覽相同分類產品 30 / 52  [下一頁 >>]
12-Channel 16-PWM LED驅動器 - SPI Interface TLC59711(ada1455)
NT$490
運費NT$50
條碼8890
產品說明

※本產品原廠代理從國外進口,有些交期較長,下訂前請詢問!

 

For all of you out there who want to control 12 channels of PWM, we salute you! We also would like you to check out this breakout board for the TLC59711 PWM driver chip. This chip can control 12 separate channels of 16-bit PWM output. This is the highest-resolution PWM board we've seen! Designed (and ideal) for precision LED control, this board is not good for driving servos. If you need to drive servos, we have a controller for that over here.

Only two "SPI" pins are required to send data (our Arduino library shows how to to use any digital microcontroller pins). Best of all, the design is completely chainable. As long as there's enough power for all the boards you can chain as many as you'd like, like a little trail of blue PCBs stretching out into the sunset. Each of the 12 outputs are constant-current and open drain. You can drive multiple LEDs in series, with a V+ anode supply of up to 17V. If you want to drive something that requires a digital input, you must use a pullup resistor from the drive pin to your logic level to create the full waveform.

One resistor is used to set the current for each of the outputs, the constant current means that the LED brightness doesn't vary if the power supply dips. We use a 3.3K resistor for about 15mA but you can solder a thru-hole resistor over it if you'd like to change that value. Check the TLC59711 datasheet for details on resistor-to-current values. There's also a handy on-chip 3.3V regulator which you can use if you need a logic level regulator.

We include a few extras to make this board easy to use: a green power-good LED, four mounting holes and a current-set resistor. A bit of 0.1" header is also included so you can solder it on and plug into a breadboard.

To use: Power V+ with 5-17VDC, and connect ground to the common ground. Then send 3-5V logic SPI data on DIN (data in) and CLK (clock). Our Arduino library will get you started with blinking LEDs, install it and run the example code with the noted pin configuration.

There's a typo in the silkscreen, the second R0 should be R1 - but you knew that already!

 

  • Dimensions: 22.75mm / 0.89" x 28.38mm / 1.1" x 3mm / 0.1"
  • Weight: 2.13g
  •  

    問與答

    目前沒有任何商品問答!
    本商品上架日期:2013-08-19.
    評價
    建議購買的商品清單!可以參考看看喔
    ●24-Channel 12-bit PWM LED Driver - SPI Interface TLC594(ada1429
    ●24-Channel 12-bit PWM LED Driver - SPI Interface TLC594(ada1429
    購物車 更多
    空的...
    查詢訂單狀態
     
    請輸入您的訂單編號
    商品通知狀態 更多
    通知12-Channel 16-PWM LED驅動器 - SPI Interface TLC59711(ada1455)
    更新時通知我
    推薦給朋友
     
    推薦這個商品給朋友

    聯絡方式:手機:0933807110 或 0968222607
    E-mail:i0104@ms13.hinet.net(主要信箱) & i03070309@yahoo.com.tw(次要) & a_te0307@hotmail.com & A9215017@mail.ntust.edu.tw & r94922042@ntu.edu.tw