洋天科技洋天科技
公司簡介訂購方式匯款確認檔案下載 聯絡我們保固說明訂單查詢討論區
電子郵件:

密碼:

忘記密碼
加入會員
  首頁 | 原廠 Arduino® | 特殊服務設計 | 轉接座及轉接板/麵包板 | 開發板/燒錄器/模擬器 | 相容 For Arudino® 週邊及配件 | OKdo系列 | Saleae 系列 | Adafruit 系列 | ArduCam 系列 | Camera 攝像頭 | ROCK 系列 | Debix系列開發板 | Raspberry Pi 樹莓派 | Banana Pi 香蕉派 | BeagleBone 狗骨頭 | M5Stack系列 | Micro:bit (BBC)系列 | NVIDIA Jetson Nano系列 | Pololu 系列 | Pycom 系列 | Seeed 系列 | Sparkfun 系列 | WeMos 系列 | 傳感器 | Cubieboard/CubieTruck系列 | Firefly 系列 | Microduino系列 | Orange Pi 香橙派 | PCB板 | PLC 系列 | Robot 機器人 | UDOO 系列 | RedBearLab 系列 | LattePanda系列 | LittleBits 系列 | Libelium 系列 | Luxonis 相機系列 | PCduino | RobotElectronics 系列 | MageDok 顯示屏 | LCD/LCM/TFT/LVDC | Dimension Engineer 系列 | 通訊模組 | 影音器材(含轉換器) | 線材/連結器/轉換器 | 測量儀器 | 馬達/馬逹控制器/電源模組 | 其他 | 焊接/維修工具 | IC零件 | LED燈-裝飾燈 | 工作站迷你電腦 mini PC | 擴大器 | 雕刻機 | 電池 | 電腦周邊 | 檢定考套件 | 停售商品
  首頁 » 商品目錄 » Adafruit 系列 » Breakout Boards 模組 » ada1381
商品搜尋 進階
 |  購物車內容  |  結帳   
商品分類
  *新版 STEMMA QT / Qwiic接頭系列
  *轉接板
  Sensors/Parts
  *Feather 系列
  *FLORA 系列&配件
  Arduino
  BeagleBone 狗骨頭
  Development Boards
  Kits 套件 套餐
  LCDs & Displays 屏
  SMT SMD 轉板 轉接座
  Bluetooth 藍芽
  Breakout Boards 模組
    Batteries 電池/Power 電壓
    LED 矩陣
    Light 光感 光敏 光線...
    Motor Driver 驅動板
    Sound 麥克風...
    Temperature 溫度 濕度...
    Touch 觸碰 觸摸
    WiFi板
    帶 USB頭 模組
    測氣體
  Buttons 按鍵& Switches搖桿
  Cameras 攝像頭
  CNC 舵機 馬達 零件
  EL Wire/Tape/Panel
  Laser 雷射激光
  LEDs 燈
  Materials 導電
  NeoPixel 系列 LE燈燈
  Photon 系列&配件
  Power 電源、電池...
  RFID / NFC
  Robotics
  停產 停售 DISCONTINUED
  SIM800系列(台灣不能用)
Arduino
Pololu
Seeed
Sparkfun
robot-electronics
dimensionengineering
libelium
adafruit
udoo
redbearlab
Arducam
goembed
Saleae
okdo
服務台
公司簡介
退換貨服務
訂購方式
聯絡我們
匯款確認
[<< 前一頁]  瀏覽相同分類產品 25 / 52  [下一頁 >>]
VS1053 Codec+MicroSD Breakout MP3/WAV/MIDI/OGG Play+Record
NT$1,350
運費NT$50
條碼ada1381
產品說明

※本產品原廠代理從國外進口,有些交期較長,下訂前請詢問!

This breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can also be used to record audio in both PCM (WAV) and compressed Ogg Vorbis. You can do all sorts of stuff with the audio as well such as adjusting bass, treble, and volume digitally. There is also 8 GPIO pins that can be used for stuff like lighting up small LEDs or reading buttons.

All this functionality is implemented in a light-weight SPI interface so nearly any microcontroller can play audio from an SD card. There's also a special MIDI mode that you can boot the chip into that will read 'classic' 31250Kbaud MIDI data on a UART pin and act like a synth/drum machine - there are dozens of built-in drum and sample effects! But the chip is a pain to solder, and needs a lot of extras. That's why we spun up the best breakout, perfect for use with an Arduino but also good for other microcontrollers that just don't have the computational power to decode MP3s.

The breakout is slim enough to fit on a breadboard with 1 row of holes left over for wiring. There's 3.3v and 1.8v regulators onboard with ferrite beads and analog filtering for quality analog output. There's a microphone input port that you can wire up a line-in or mic to and record compressed audio. All 8 GPIO are broken out and they all have built in 100K pulldowns, simply connect your button from the GPIO pin to 3.3V for an active-high connection. You'll likely want to play music from a microSD card so we added a holder on-board. And since we know so many of our customers use 5V microcontrollers like the Arduino, we made the interface pins all 5V compliant with level shifters so you can use the chip at 3V or 5V power/logic!

Each order comes with a fully assembled and tested breakout board, two 100uF electrolytic capacitors for line-level output coupling, some 0.1" male header you can solder to the breakout so it plugs into a breadboard and a bonus stereo headphone jack that will be handy when you want to plug headphones in!

You can drive a pair of 30ohm headphones directly from the LOUT/ROUT pins if the 'ground' connection is tied to GBUF however this is not a line-out connection. If you want to connect to a stereo system or powered speakers, fit the two included 100uF electrolytic caps in series on the LOUT/ROUT pins between the breakout and the input of the stereo, then connect the common ground to AGND If you just need loudspeakers, our 3.7W stereo amp board plus two 3W 4ohm speakers will give you lots of boom and you don't need the 100uF caps because the amplifier has differential inputs.

We're still working on a detailed tutorial, but we do have an excellent Arduino library that demonstrates everything cool about this library: playing music off an SD card, using the GPIO pins as input/outputs, playing music using an interrupt (so it's in the background), using the VS1053 as a MIDI synthesizer (no SD required), and recording Ogg vorbis audio from a microphone/line-in to SD. So for advanced users who don't need a detailed tutorial, check it out!

 

問與答

目前沒有任何商品問答!
本商品上架日期:2013-08-16.
評價
建議購買的商品清單!可以參考看看喔
>(售完*)6P 杜邦線 長21cm 母對母 純銅鍍錫連接線 間距2.54mm 轉接線
>(售完*)6P 杜邦線 長21cm 母對母 純銅鍍錫連接線 間距2.54mm 轉接線
SoftModem Audio Jack Modem for IPhone and For Arduino®
SoftModem Audio Jack Modem for IPhone and For Arduino®
●Standard LCD 16x2+extras white on blue(ada181)
●Standard LCD 16x2+extras white on blue(ada181)
購物車 更多
空的...
查詢訂單狀態
 
請輸入您的訂單編號
商品通知狀態 更多
通知VS1053 Codec+MicroSD Breakout MP3/WAV/MIDI/OGG Play+Record
更新時通知我
推薦給朋友
 
推薦這個商品給朋友

聯絡方式:手機:0933807110 或 0968222607
E-mail:i0104@ms13.hinet.net(主要信箱) & i03070309@yahoo.com.tw(次要) & a_te0307@hotmail.com & A9215017@mail.ntust.edu.tw & r94922042@ntu.edu.tw