＊本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！

新款 FLORA-V3(ada0659)，可穿戴電子平臺 Wearable electronic platform: Arduino-compatible 

• As of May 12th, 2015, we're now selling the Flora v2! The Flora v2 now comes with a micro-USB port instead of a mini-USB port and a programmable NeoPixel installed (it's connected to Digital 8, ready for your blinky commands)
  　　　自2015年5月12日起， 我們現在開始銷售Flora v2！Flora v2現在配備了微型USB端口而不是微型USB端口，並安裝了可編程的NeoPixel（已連接至Digital 8，準備好執行您的眨眼命令）
• As of July 7 2016, we're now selling Flora v3 with a lovely new silkscreen, and alligator-clip friendly pads. Otherwise it's the exact same shape and circuit.
  從2016年7月7日開始，我們現在出售的Flora v3帶有可愛的新絲印和鱷魚夾友好型護墊。否則，它是完全相同的形狀和電路。
• As of Oct 1st, 2016, we're now selling the Flora with large alligator-clip friendly pads. They can still be sewn into clothing.
  自2016年10月1日起， 我們現在開始銷售帶大型鱷魚夾友好護墊的Flora。他們仍然可以縫在衣服上 

影片『What is FLORA?』：https://youtu.be/kiBbRU5rwQc

影片『2015/5/13』：https://youtu.be/7Rt5xUbqDzA

影片『2016/7/13』：https://youtu.be/rJINHq07em0

影片『縫在裙子上』：https://youtu.be/Cg3uBXMrshI

【 DESCRIPTION】原文說明

　　　　FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit's support, tutorials and projects. Check out dozens of FLORA tutorials on the Adafruit Learning System, with more added all the time!
    FLORA是Adafruit的功能齊全的可穿戴電子平台。這是一個圓形的，可縫製的，與Arduino兼容的微控制器，旨在實現出色的可穿戴項目。FLORA隨附Adafruit的支持，教程和項目。查閱Adafruit學習系統上的數十篇FLORA教程，並且無時無刻不在增加！

　　　　The FLORA is small (1.75" diameter, weighing 4.4 grams). The FLORA family also has the best stainless steel threads, sensors, GPS modules and chainable LED NeoPixels, perfect accessories for the FLORA main board.
    FLORA很小（直徑為1.75英寸，重4.4克）。FLORA系列還具有最好的不銹鋼螺紋，傳感器，GPS模塊和可鏈接的LED NeoPixels，這是FLORA主板的理想配件。

　　　　The FLORA has built-in USB support. Built in USB means you plug it in to program it, it just shows up - all you need is a Micro-B USB cable, no additional purchases are needed! We have a modified version of the Arduino IDE so Mac & Windows users can get started fast - or with the new 1.6.4+ Arduino IDE, it takes only a few seconds to add Flora-support. The FLORA has USB HID support, so it can act like a mouse or keyboard to attach directly to computers.
    FLORA具有內置的USB支持。內置USB意味著您將其插入以對其編程，它隨即顯示-您所需的是Micro-B USB電纜，無需額外購買！我們具有Arduino IDE的修改版，因此Mac和Windows用戶可以快速入門-或使用新的1.6.4+ Arduino IDE，只需幾秒鐘即可添加Flora支持。FLORA具有USB HID支持，因此可以像鼠標或鍵盤一樣直接連接到計算機。

　　　　FLORA has a small but easy to use onboard reset button to reboot the system. The power supply is designed to be flexible and easy to use. There is an onboard polarized 2 JST battery connector with protection schottky diode for use with external battery packs from 3.5v to 16v DC in. Can be used with LiIon/LiPoly, LiFe, alkaline or rechargeable NiMh/NiCad batteries of any size. The FLORA does not have a LiPo charger included by design, this allows safe use with multiple battery types and reduces risk of fire as it is not recommended to charge these batteries on fabric. We suggest one of our micro-lipo chargers if you want to use LiPo batteries with FLORA.
    FLORA有一個很小但易於使用的板載重置按鈕來重新引導系統。電源設計靈活且易於使用。板載極化2 JST電池連接器帶有保護肖特基二極管，可與3.5v至16v DC in的外部電池組一起使用。可與任何大小的LiIon / LiPoly，LiFe，鹼性或可充電NiMh / NiCad電池一起使用。菌群確實不具備設計包括一個鋰聚合物充電，這使得安全使用與多種類型的電池，並減少由於不建議在織物上這些電池充電火災。如果您想將LiPo電池與FLORA一起使用，建議使用我們的微脂充電器之一。

　　　　FLORA has onboard power switch connected to 2A power FET for safe and efficient battery on/off control, so you can power quite a bit without burning out your switch. The FLORA has an onboard 3.3v 250mA regulator with a protection diode and USB fuse so that the microcontroller voltage is consistent and can power common 3.3v modules and sensors.
    FLORA的板載電源開關連接到2A功率FET，可進行安全有效的電池開/關控制，因此您可以在不燒毀開關的情況下進行大量供電。FLORA具有一個帶有保護二極管和USB保險絲的板載3.3v 250mA穩壓器，因此微控制器的電壓是恆定的，可以為常見的3.3v模塊和傳感器供電。

　　　　We spent a lot of time on the power supply because the FLORA power system is specifically designed to allow easy control and power of a large quantity of addressable NeoPixels. Flora can easily drive 50 pixels directly from the onboard power supply, or up to 500 with the pixels externally powered by a separate 5V supply.
      我們在電源上花費了很多時間，因為FLORA電源系統經過專門設計，可輕鬆控制和供電大量可尋址的NeoPixel。Flora可以輕鬆地直接從板載電源驅動50個像素，或者使用獨立的5V電源從外部驅動像素，最多可以驅動500個像素。

• FLORA is fabric friendly-- all the components on board are flush to the PCB and won't snag delicate garments (it does not use FTDI headers).
      FLORA具有面料友好性-板上的所有組件均與PCB齊平，不會纏住精緻的衣服（它不使用FTDI接頭）。
  
• FLORA is extremely beginner-friendly - it is difficult to destroy the FLORA by connecting a battery backwards due to polarized connector and protection diodes. The on-board regulator means that even connecting a 9V battery will not result in damage or tears.
      FLORA非常適合初學者-由於極性連接器和保護二極管，很難通過向後連接電池來破壞FLORA。板載穩壓器意味著即使連接9V電池也不會導致損壞或撕裂。
  
• The FLORA has 4 indicator LEDs: power good, digital signal LED for bootloader feedback, data rx/tx. Also onboard is an ICSP connector for easy reprograming for advanced users. Flora v2 even has an RGB NeoPixel for even more colorful lighting.
      FLORA具有4個指示燈LED：電源正常，用於引導加載程序反饋的數字信號LED，數據接收/發送。板上還裝有一個ICSP連接器，便於高級用戶重新編程。Flora v2甚至具有RGB NeoPixel，可提供更加豐富多彩的照明。
  
• There are 14 sewing tap pads for attachment and electrical connections. Data buses are interleaved with power and ground pads for easy module and sensor attachments without worrying about overlapping traces which are not possible with conductive thread.
      有14個用於連接和電氣連接的縫紉抽頭墊。數據總線與電源和接地墊交錯插入，以方便模塊和傳感器的連接，而不必擔心導線重疊，這是導電線無法實現的。
  
• As of July 7 2016 we're now selling Flora v3 with alligator-clip friendly pads.
      從2016年7月7日起，我們將銷售帶鱷魚夾友好護墊的Flora v3。
  
• The FLORA works great with the Arduino IDE and is super easy to install support if you have IDE 1.6.4 or later
      FLORA可與Arduino IDE配合使用，並且如果您具有IDE 1.6.4或更高版本，則安裝支持非常容易
  

　　　　The FLORA is not the first wearable Arduino / Arduino-compatible. Leah Buechley’s Lilypad was developed in 2007 and while they are both round, FLORA is a completely new platform that works seamlessly with the FLORA accessories.
    FLORA不是第一個可穿戴Arduino / Arduino兼容的設備。Leah Buechley的Lilypad開發於2007年，雖然兩者都是圓形的，但FLORA是一個全新的平台，可與FLORA配件無縫配合。

　　　The FLORA is made in NYC at Adafruit, it was designed by Limor Fried (Ladyada), Adafruit's founder and engineer. Adafruit has a proven track record of providing 100+ high-quality libraries for Arduino/Arduino IDE, hundreds of tutorials, open-source code and contributions to the Arduino project. Ladyada was a member of the MIT wearables group and likes to sew.
    FLORA由Adafruit的創始人和工程師Limor Fried（Ladyada）在紐約的Adafruit製造。Adafruit在為Arduino / Arduino IDE提供100多個高質量庫，數百個教程，開源代碼以及對Arduino項目的貢獻方面有著良好的記錄。Ladyada是麻省理工學院可穿戴設備小組的成員，喜歡縫製。

You may get an off-white or black JST connector.
    您可能會獲得灰白色或黑色的JST連接器。