產品說明0
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
SPF 原廠 Hot-Air Rework Station - 303D 熱風返修台 (TOL-14557),升級新款TOL-19101
影片：https://youtu.be/Oe5Kjn9DlzM
DESCRIPTION
This hot-air rework station is great for professionals and hobbyists in need of tight temperature tolerances and large air flows. This unit displays a digital readout of the actual air temperature with a flow rate of up to 23L per minute. This very powerful unit can be used for multiple applications including standard SMD reflow/repair/removal, thermal IC stress testing, thermoplastic welding, and shrink-wrapping.／這個熱風返修站非常適合需要嚴格溫度公差和大氣流的專業人士和愛好者。該裝置顯示實際空氣溫度的數字讀數，流速高達每分鐘 23 升。這個非常強大的單元可用於多種應用，包括標準 SMD 回流/修復/去除、IC 熱應力測試、熱塑性焊接和收縮包裝
Each 303D Hot-Air Rework Station has two knobs on the front of the case to control air flow as well as temperature. These knobs are labeled Low to High allowing you to adjust the 303D almost immediately. This rework station even has a detachable power cable so if you happen not to like in North American you can replace it to fit your own standard plug provided it still uses 110/120V.／每個 303D 熱風返修台在機箱前部都有兩個旋鈕，用於控制氣流和溫度。這些旋鈕標記為從低到高，讓您幾乎可以立即調整 303D。這個返修站甚至有一根可拆卸的電源線，所以如果你碰巧不住在北美，你可以更換它以適應你自己的標準插頭，只要它仍然使用 110/120V。
這個最新版本的熱風返修站有一些很大的改進。新的100℃-500℃溫度範圍，自動休眠功能，溫度補償功能
INCLUDES
- 303D Hot Air Rework Station
- Wand Holder
- x2 Round Nozzle Tips
FEATURES
- Closed-loop temperature control
- Heats up quickly
- Anti-static design
- Intelligent cooling system maintains airflow after the unit is powered off until the air temperature is below 100°C
- Temperature adjustment range: 100 ~ 480°C（升級500度）
- Handle length (including air line): 120cm
- Noise: <40dB
- 110VAC input
- Removable power cable
- Dimensions: 224 x 126 x 110mm
