洋天科技洋天科技
公司簡介訂購方式匯款確認檔案下載 聯絡我們保固說明訂單查詢討論區
電子郵件:

密碼:

忘記密碼
加入會員
  首頁 | 原廠 Arduino® | 特殊服務設計 | 轉接座及轉接板/麵包板 | 開發板/燒錄器/模擬器 | 相容 For Arudino® 週邊及配件 | OKdo系列 | Saleae 系列 | Adafruit 系列 | ArduCam 系列 | Camera 攝像頭 | ROCK 系列 | Debix系列開發板 | Raspberry Pi 樹莓派 | Banana Pi 香蕉派 | BeagleBone 狗骨頭 | M5Stack系列 | Micro:bit (BBC)系列 | NVIDIA Jetson Nano系列 | Pololu 系列 | Pycom 系列 | Seeed 系列 | Sparkfun 系列 | WeMos 系列 | 傳感器 | Cubieboard/CubieTruck系列 | Firefly 系列 | Microduino系列 | Orange Pi 香橙派 | PCB板 | PLC 系列 | Robot 機器人 | UDOO 系列 | RedBearLab 系列 | LattePanda系列 | LittleBits 系列 | Libelium 系列 | Luxonis 相機系列 | PCduino | RobotElectronics 系列 | MageDok 顯示屏 | LCD/LCM/TFT/LVDC | Dimension Engineer 系列 | 通訊模組 | 影音器材(含轉換器) | 線材/連結器/轉換器 | 測量儀器 | 馬達/馬逹控制器/電源模組 | 其他 | 焊接/維修工具 | IC零件 | LED燈-裝飾燈 | 工作站迷你電腦 mini PC | 擴大器 | 雕刻機 | 電池 | 電腦周邊 | 檢定考套件 | 停售商品
  首頁 » 商品目錄 » Pololu 系列 » Motion Control Modules » PI1183
商品搜尋 進階
 |  購物車內容  |  結帳   
商品分類
  DRVXXXX系列
  Electronics
  G2 High-Power Motor Drivers
  Mechanical Components
  Motion Control Modules
    RC Servo Controllers
  Robot Kits
  Sensors
Arduino
Pololu
Seeed
Sparkfun
robot-electronics
dimensionengineering
libelium
adafruit
udoo
redbearlab
Arducam
goembed
Saleae
okdo
服務台
公司簡介
退換貨服務
訂購方式
聯絡我們
匯款確認
[<< 前一頁]  瀏覽相同分類產品 16 / 27  [下一頁 >>]
A4988 步進馬達驅動板 含穩壓 Stepper Motor Driver Carrier with Voltage Regu
NT$480
運費NT$50
條碼PI1183
產品說明

※本產品原廠代理從國外進口,有些交期較長,下訂前請詢問!

The A4988 stepper motor driver carrier with voltage regulators is a breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver. The board has two voltage regulators (5 V and 3.3 V), eliminating the need for separate logic and motor supplies. The driver features adjustable current limiting, overcurrent and overtemperature protection, and five different microstep resolutions (down to 1/16-step). It operates from 8 – 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling).

 

A4983/A4988 stepper motor driver carrier with voltage regulators with dimensions.

 

Overview

This product is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; we therefore recommend careful reading of the A4988 datasheet (380k pdf) before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil (see the Power Dissipation Considerations section below for more information). Here are some of the driver’s key features:

  • Simple step and direction control interface
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
  • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
  • Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
  • Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
  • Short-to-ground and shorted-load protection

This carrier has reverse power protection on the main power input and built-in 5 V and 3.3 V voltage regulators that eliminate the need for separate logic and motor supplies and let you control the driver with microcontrollers powered at 5 V or 3.3 V. We also sell a smaller, higher-performace version of the A4988 carrier without voltage regulators.

Like nearly all our other carrier boards, this product ships with all surface-mount components—including the A4988 driver IC—installed as shown in the product picture.

Some unipolar stepper motors (e.g. those with six or eight leads) can be controlled by this driver as bipolar stepper motors. For more information, please see the frequently asked questions. Unipolar motors with five leads cannot be used with this driver.

Included Hardware

The A4988 stepper motor driver carrier with voltage regulators comes with one 1×14-pin breakaway 0.1" male header and one 1×8-pin breakaway 0.1" male header. The headers can be soldered in for use with solderless breadboards or 0.1" female connectors. You can also solder your motor leads and other connections directly to the board.

 

 

Using the driver

 

Minimal wiring diagram for wiring a 5V microcontroller to an A4983/A4988 stepper motor driver carrier with voltage regulators (full-step mode).

 

Power connections

The driver requires a logic supply voltage (3 – 5.5 V) to be connected across the VDD and GND pins and a motor supply voltage (8 – 35 V) to be connected across VMOT and GND. The logic voltage can be supplied from an external source, such as that powering the logic of the rest of the system, or by jumpering the output of the 5 V or 3.3 V voltage regulator outputs to VDD. There are also surface-mount pads that allow VDD selection to be made by making a solder bridge across the appropriate pads. Note that the driver’s regulators can also be used to power other electronics in the system, such as the controlling MCU.

The motor power supply should be capable of delivering the expected currents for the stepper motors being used (peaks up to 4 A).

Motor connections

Four, six, and eight-wire stepper motors can be driven by the A4988 if they are properly connected; a FAQ answer explains the proper wirings in detail.

Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered is asking for trouble.)

 

 

Step (and microstep) size

Stepper motors typically have a step size specification (e.g. 1.8° or 200 steps per revolution), which applies to full steps. A microstepping driver such as the A4988 allows higher resolutions by allowing intermediate step locations, which are achieved by energizing the coils with intermediate current levels. For instance, driving a motor in quarter-step mode will give the 200-step-per-revolution motor 800 microsteps per revolution by using four different current levels.

The resolution (step size) selector inputs (MS1, MS2, and MS3) enable selection from the five step resolutions according to the table below. MS1 and MS3 have internal 100kΩ pull-down resistors and MS2 has an internal 50kΩ pull-down resistor, so leaving these three microstep selection pins disconnected results in full-step mode. For the microstep modes to function correctly, the current limit must be set low enough (see below) so that current limiting gets engaged. Otherwise, the intermediate current levels will not be correctly maintained, and the motor will skip microsteps.

MS1 MS2 MS3 Microstep Resolution
Low Low Low Full step
High Low Low Half step
Low High Low Quarter step
High High Low Eighth step
High High High Sixteenth step

Control inputs

Each pulse to the STEP input corresponds to one microstep of the stepper motor in the direction selected by the DIR pin. Note that the STEP and DIR pins are not pulled to any particular voltage internally, so you should not leave either of these pins floating in your application. If you just want rotation in a single direction, you can tie DIR directly to VCC or GND. The chip has three different inputs for controlling its many power states: RST, SLP, and EN. For details about these power states, see the datasheet.

Current limiting

To achieve high step rates, the motor supply is typically much higher than would be permissible without active current limiting. For instance, a typical stepper motor might have a maximum current rating of 1 A with a 5Ω coil resistance, which would indicate a maximum motor supply of 5 V. Using such a motor with 12 V would allow higher step rates, but the current must actively be limited to under 1 A to prevent damage to the motor.

The A4988 supports such active current limiting, and the trimmer potentiometer on the board can be used to set the current limit. One way to set the current limit is to put the driver into full-step mode and to measure the current running through a single motor coil without clocking the STEP input. The measured current will be 0.7 times the current limit (since both coils are always on and limited to 70% of the current limit setting in full-step mode). Please note that changing the logic voltage, Vdd, to a different value will change the current limit setting since the voltage on the REF pin is a function of Vdd.

Another way to set the current limit is to measure the voltage on the REF pin and to calculate the resulting current limit (the current sense resistors are 0.05Ω). The current limit relates to the reference voltage as follows:

Current Limit = VREF × 2.5

So, for example, if the reference voltage is 0.3 V, the current limit is 0.75 A. As mentioned above, in full step mode, the current through the coils is limited to 70% of the current limit, so to get a full-step coil current of 1 A, the current limit should be 1 A/0.7=1.4 A, which corresponds to a VREF of 1.4 A/2.5=0.56 V. See the A4988 datasheet for more information.

Note: The coil current can be very different from the power supply current, so you should not use the current measured at the power supply to set the current limit. The appropriate place to put your current meter is in series with one of your stepper motor coils.

Power dissipation considerations

The A4988 driver IC has a maximum current rating of 2 A per coil, but the actual current you can deliver depends on how well you can keep the IC cool. The carrier’s printed circuit board is designed to draw heat out of the IC, but to supply more than approximately 1 A per coil, a heat sink or other cooling method is required.

This product can get hot enough to burn you long before the chip overheats. Take care when handling this product and other components connected to it.

Please note that measuring the current draw at the power supply will generally not provide an accurate measure of the coil current. Since the input voltage to the driver can be significantly higher than the coil voltage, the measured current on the power supply can be quite a bit lower than the coil current (the driver and coil basically act like a switching step-down power supply). Also, if the supply voltage is very high compared to what the motor needs to achieve the set current, the duty cycle will be very low, which also leads to significant differences between average and RMS currents.

Schematic Diagram

 

Schematic diagram of the md09a A4988 stepper motor driver carrier with regulators.

 

Note: This board is a drop-in replacement for the original (and now discontinued) A4983 stepper motor driver carrier with voltage regulators. The key difference is that the newer A4988 offers overcurrent protection that the A4983 lacks; it is otherwise virtually identical to the A4983.

問與答

目前沒有任何商品問答!
本商品上架日期:2013-05-28.
評價
建議購買的商品清單!可以參考看看喔
TINY85 USB Micro 開發板 For Arduino®
TINY85 USB Micro 開發板 For Arduino®
42步進電機(Planet Gear Stepper Motor)42BYGH40兩相步進電機FIT349
42步進電機(Planet Gear Stepper Motor)42BYGH40兩相步進電機FIT349
購物車 更多
1 x >(停產)(書BOOK)樹莓派用戶指南(第3版) Raspberry Pi入門指南 入門教程 9787115405005
1 x NVIDIA Jetson Nano Module 核心板,AI人工智能開發板SoM(底板、風扇、電源另購)物聯網、邊緣計算
1 x ●Raspberry Pi3B Pi4B專用:High Quality Camera HQ的 壓克力板(標準版Basic)050
1 x ●貓頭鷹(Noctua)NF-A4x20 12V PWM 4CM風扇/適用於NVIDIA Jetson Nano
1 x AUO(友達)G065VN01 V2 6.5」寸液晶屏 液晶面板
1 x W77E58
1 x LED燈帶5050七彩變色RGB 燈條(24V 不防水5米/卷 進口芯片)(LED燈:60)
1 x (10pcs一標) 彈性聯軸器 抱緊式 鎖緊式 編碼器 伺服電機 L:30/D:25/d1:d2:10x10mm
1 x FPC 10PIN 多功能能測試板(PCB空板,不帶針不帶座),正面間距0.5mm/反面0.4mm 單排 轉接板
1 x ●U6036,Arducam原廠 0.3MP 1/6 CMOS OV7670 Standalone Camera 單鏡頭
1 x Small e-paper Shield V2(104030019)
1 x *(含觸控)樹莓派Raspberry Pi 配件 7寸液晶屏車載電腦顯示器套件HDMI+VGA+AV
1 x ▽●(新款現貨)micro:bit套件智能小車(不含主板),平衡遙控小車 DIY套件 Qbit可編程機器人
1 x VisionFive JH7100開發板 RISC-V架構單板計算機,香蕉派合作款
1 x 1.5寸OLED液晶屏模塊白SSD1327驅動I2C通信兼容UNO R3 STM32
1 x &●Raspberry Pi Zero專用:High Quality Camera HQ的 壓克力板(專業版) 安裝板 053
1 x *停產,NVIDIA JETSON NANO 開發套件V1 A02 64bit (風扇、外殼、電源、SD卡另購)
1 x ●VETUS防靜電鑷子/ESD-10 11 12 13 14 15 (6把一組)
1 x Microduino 模組 Stepper / 帶轉換器和過流保護的DMOS 微步驅動器
1 x ●香蕉派 Banana Pi M2 Ultra (BPI-M2U) 四核 2GB DDR 8GB EMMC 藍牙W
1 x ●(天線拉桿+30CM導線) TEA5767 ARDUINO 收音機模塊電台FM 立體聲收音機模塊
1 x >*(售完,停產)SmartiPi Touch 2代Case STV2 / 樹莓派 Pi3B/Pi4B 原廠7吋屏 觸控螢幕專用
1 x ●單芯鍍錫銅線 OK線 250M 30AWG 外徑線寬0.5mm 單芯線 (顏色隨機出貨)
1 x 增強三菱PLC FX1S 20MR/MT- 4AD2DA 時鐘Modbus模擬量 輸入輸出(A.FX1S(20MR)4AD2DA
1 x $請先詢價UDOO Quad 四核心Freescale i.MX 6 + Atmel SAM3X8E
1 x &香蕉派 Banana Pi R3 (BPI-R3) 四核 2GB DDR3 8GB EMMC
1 x ●16路 輸入輸入PNP、NPN兼容(NPN輸出)三菱西門子 PLC功率放大 電磁閥驅動板 (輸入3.3V)
1 x Seeed XIAO (SAMD21)- Arduino 微控制器 Cortex M0+(102010328)
1 x (YYC-7)延時繼電器模塊 信號循環 定時吸合 通斷開關 3V 3.7V 4.5v 5v 6v
1 x 74HC595 SPI 串行數碼管顯示模塊
1 x Jetson TX2 NX 核心板 4G,入門級核心模組模塊、AI人工智能開發板(底板、風扇、電源另購)
1 x ●(現貨)Banana Pi 香蕉派 BPI-M1 亞克力外殼 壓克力外殼
1 x A290011T-70
1 x ●Pimoroni Piano HAT 鋼琴 適用樹莓派(ada2695)
1 x 全新2.2寸串口SPI TFT液晶模塊ILI9341驅動IC 可硬件SPI驅動
1 x ▽●(特價,現貨)2V 100MA 太陽能電池板 60x60
1 x PIC 16C72A
1 x 7.5inch NFC-Powered HD e-Paper Eval Kit(套件)7.5寸 高清無源NFC電子墨水屏 評估套
1 x ●1.3inch OLED (B)/SH1106 1.3寸 OLED顯示屏模組 12864(藍色) 直排針
1 x &●(現貨/特價*)原廠 MLX90640-BAB IR Thermal Camera Breakout熱像儀 55度 ada4
1 x (售完*) RedBearLab原廠(台灣獨家代理)BLE Shield V2.1開發板/Bluetooth Low ..
1 x ●福岡老虎鉗(FO-1403/8寸-省力鋼絲鉗),多功能萬用 鋼絲鉗 德國進口款 電工鉗子工具
1 x $Servo - Generic High Torque (Standard Size) FS5106B舵機 ROB-11965
1 x >缺貨(量大可訂)Seeed Wio Node 迷你開發版 支持Raspberry Pi 樹莓派(102110057)
1 x CP2102模塊(黑色板),USB轉TTL STC下載 Pro mini 下載 硬盤 刷機
1 x PIC 16F873A
1 x &$●樹莓派 Pi Compute module 4 (無線版2GB RAM+32GB eMMC) CM4 WIFI
1 x #&●最新 Raspberry Pi 4 B (是新版Pi4B) 2GB內存 V1.5版 type-C (單板)
1 x 6N11電子管
1 x 2.7英吋 12864 OLED液晶顯示模塊 FIT328
1 x *NVIDIA Jetson Nano Developer Kit 桌上型(標配,不含主板)台灣公司貨
1 x ●【獨家首賣】DEBIX Model A I/O Board 工業單板計算機 - IO擴展板(EMB-AS-E01)
1 x Digital RGB LED Weatherproof Strip 32 LED 1m(ada306)
1 x AVR Mega32L OV7670 傳感器模組 CMOS圖像 攝像頭 數位相機 開發板 帶2.8"TFT
1 x >(U6066停產,改參考新款U3182)Arducam原廠 0.3MP OV7725 USB Camera UVC 相機
1 x (書BOOK)Raspberry Pi編程指南(第2版) 基於Python 遊戲編程 9787115442031
1 x 時立 1080P 全高清HDMI 外置錄製盒 錄寶Min(小盒子)
1 x IDC26 PLC中繼端子台 26芯 牛角轉接線端子排轉接板 牛角座轉端子台(平面板本)
1 x #樹莓派Pi3B+ 螢幕:3.5寸 HDMI LCD 顯示器 觸摸顯示屏 (Pi 遊戲系統屏幕) Pi 3B+
1 x 原廠 Stereo 20W Class D Audio Amplifier - MAX9744 (ada1752)
1 x 5.65inch e-Paper Module (F)模組,5.65寸 彩色電子墨水屏 600X448
1 x (聖誕限時優惠5%折扣)reComputer J2012-Edge AI (16G),NVIDIAJetsonXavierNX
1 x Arducam原廠 5 Mega pixel Module OV5642 攝像頭 1080P(B0020)
1 x ●Arducam原廠 PTZ Pan Tilt Zoom Camera 變焦相機(含500萬攝像頭板),(B01675MP)Pi
1 x B0410,Time of Flight Camera For Raspberry Pi 樹莓派用的飛行時間相機
1 x ATTINY26L-8PI
1 x 1000線 FPV攝像頭 2.8MM 120°寬視角 COMS攝像頭超輕/穿越機/固定翼用
1 x 4.3inch HDMI LCD (B),4.3寸電容屏 800×480 IPS 高兼容性
1 x #●ZKT-10XP4,(NPN和PNP) 轉 PNP 4路 光電隔離/光耦隔離器/PLC信號轉換 (5V轉12V~24V)
1 x >(停產)7inch FHD Monitor / 7寸 電容觸摸屏 1080×1920 IPS HDMI 防指紋鋼化玻璃面板
1 x 39SF040
1 x ▽●5V 400mA 2W 太陽能電池板 太陽能板 131x110 單晶PET電池板充電器
1 x ●Seeeduino Lotus - ATMega328 板子 with Grove Interface(102020001)
1 x Microduino 模組 Solo 底座 擴展板
1 x DotStar Digital LED Strip - Black黑色 144 LED/m - 0.5米 (ada2328)
1 x 39SF/VF020
1 x PIC 16F877A DIP
1 x >(缺貨)Make: 感測器: 運用Arduino和Raspberry Pi感測的專題與實驗 For Arduino® book
1 x Arduino® MKR ETH SHIELD 擴展板 (103990367/ASX00006)(義大利原廠)
1 x 2016新品 BPI-R1香蕉派Banana PI R1 智能路由器4路千兆SATA接口
1 x >(停產)Raspberry Pi Zero Pimoroni Scroll pHAT-11x5 LED Matrix(ada3
1 x >(停產)Raspberry Pi樹莓派 專用HiFiBerry DAC+ Pro 數位類比轉換器 音頻放大器(專業版)
1 x ●NVIDIA JETSON NANO 專用 散熱風扇 5V 4PIN接口 PWM調速強風 4020風扇(Fan-4020-PWTEXT_PRODUCTS_ADD
1 x ▼Parallax原廠 PING超音波距離感測器 Ultrasonic Sensor (PI1605)
1 x ●(棘輪式 鑄造鉗口)SN-2 0.25-4mm² 端子鉗 壓接鉗 壓線鉗,接SM C3 2.54 3.96 端子
1 x ▼Motor Driver 15A 18v15 / MOSFET H橋電機驅動器(PI755)
1 x #&●(現貨)NVIDIA JETSON NANO 開發套件V3 (Kit B01) 64bit 4G內存(外殼、電源、SD卡另
1 x #5V/2A DC電源充電器(美規),適用香蕉派M2、M2+、M3、M64、M2 Ultra
1 x ●香蕉派 banana pi BPI-M3/M2U/M64 專用 壓克力外殼 透明外殼
1 x Allo系列 RAINBOW 32 / 64 樹莓派
1 x &●(現貨)Raspberry Pi Zero W Basic Pack - Includes PiZeroW 基礎套件
1 x Flasher ARM (5.07.01)
1 x ●1.8V轉換座(綠板),SPI閃存 SOP8 DIP8 轉換平板主板 MX25 W25 1.8V轉接板
1 x 型號:B0317,ArduCAM 原廠 USB3.0 Camera Shield Plus 底板( Rev.C )攝像頭轉接板
1 x IDC50 辰川 中繼端子台 50芯 牛角轉接線端子 PLC中繼端子排轉接板 50路(平面版本)
1 x ●10根芯片 通用夾 TSSOP MSOP SOP TSSOP QFP IC腳夾 clip在線 燒錄夾 micro chip
1 x 12C2052AD
1 x AC 交流指針式交流電壓表頭 85L1 450V 小表頭 指針表頭
1 x &$●US美規 樹莓派 Raspberry Pi 400 Personal Computer Kit 套件(含書)pi400
NT$2,637,050
查詢訂單狀態
 
請輸入您的訂單編號
商品通知狀態 更多
通知A4988 步進馬達驅動板 含穩壓 Stepper Motor Driver Carrier with Voltage Regu
更新時通知我
推薦給朋友
 
推薦這個商品給朋友

聯絡方式:手機:0933807110 或 0968222607
E-mail:i0104@ms13.hinet.net(主要信箱) & i03070309@yahoo.com.tw(次要) & a_te0307@hotmail.com & A9215017@mail.ntust.edu.tw & r94922042@ntu.edu.tw