產品說明0
B0410，Time of Flight Camera For Raspberry Pi 樹莓派用的飛行時間相機
Demonstration／影片：https://youtu.be/pu9bSo-b11A
【Packing List／清單】：
- 1 x Arducam ToF Camera Module
- 1 x FPC Cable (15cm)
- 1 x 2-pin Dupunt Cable
Note: *To use the camera on Pi Zero and 2 W, you need this（B0210）.
A Time of Flight camera module featuring a MIPI-CSI 2 connection and offering up to 4-meter measuring range with sub-2cm precision, designed and optimized exclusively for Raspberry Pi & Nvidia Jetson boards.
Note: Raspberry Pi OS Bullseye is required for this camera (04/04/2022 or later releases), a fresh install is highly recommended.
- 像素級精度：強大的深度/距離測量。
- 大工作範圍：2m/4m 可選，使用我們的電纜延長套件可擴大 10 米的覆蓋範圍。
- 室外可用：不用擔心環境光的干擾。
- 任何 MV 庫都有效：3 種語言適用。C、C++ 或 Python
- 負擔得起的體面：以出乎意料的低成本使用原始點雲進行 3D 成像。
Quick sum-up about the camera:
- ● Real-time point cloud and depth map.
- ● Resolution: 240x180@30fps on RPI4/CM4
- ● Up to 4M measuring distance
- ● Onboard 940nm laser for both indoor & outdoor uses, no external light source needed.
- ● V4L2-based video kernel device
- ● C/C++/Python SDK for userland depth map output and example source code
- ● ROS ready.
- ● 38 x 38mm board size
Specification
相關文件
Documents
FAQ
１．Is it compatible with all Raspberry Pi models?
Yes, it can work with most Pis. However, with early models, there may be performance drops.
２．Do I need external light sources?
No, the camera has an onboard laser. (Non-intrusive, safe for the human eye.)
３．What’s the maximum operating range?
Far Mode: 4m ．Near Mode: 2m
４．
５．
６．
７．
８．
９．
１０．
１１．
