產品說明0
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
Arducam IMX219 Camera Module with fisheye lens, drop in replacement for Raspberry Pi V2 and Nvidia Jetson Camera
B0286，Arducam IMX219 魚眼鏡頭（220度）攝像頭模塊，可直接替代 Raspberry Pi V2 和 Jetson Nano 攝像頭
Package Includes 清單：
- 1pcs Arducam IMX219 Wide Angle Camera Module 廣角攝像頭模塊
【Note】：
- The package does not include any Raspberry Pi motherboard.／
不含主板 - The drop-in replacement module does not include FPC cables and any camera boards. And it requires the use of the Raspberry Pi V2 camera board to function properly.／
不含線、攝像頭底板，需搭配Raspberry Pi Ｃamera V2底板才能正常運作。 - The lenses of all camera modules are not interchangeable. Please contact sales in advance if you need to replace them.／
所有攝影機模組的鏡頭均不可互換，如需更換請提前聯絡銷售人員。
| Note on Supported Raspberry Pi Boards and OS |
| Platform | Bookworm(rpicam) | Bullseye(libcamera) | Buster(raspistill) |
| Raspberry Pi 5 | √ | | |
| Raspberry Pi 4B / 3B+ / 3A+ / Zero / Zero 2 W | √ | √ | |
Raspberry Pi CM3 / CM3+ / CM4 / CM5
(extra carrier board required) | √ | √ | √ |
This Arducam IMX219 fisheye lens camera module is designed mainly for Raspberry Pi V2 camera board and Nvidia Jetson Board, replacing the default standard IMX219 camera module to get a much wide field of view. It can be used for drones, robots, action cameras, and 3D scanning applications.／這款 Arducam IMX219 魚眼鏡頭相機模組主要為 Raspberry Pi V2 相機板和 Nvidia Jetson 開發板設計，可取代標配的 IMX219 相機模組，獲得更寬廣的視野。它可用於無人機、機器人、運動相機和 3D 掃描應用。
★KERNEL CAMERA DRIVER USED
This camera relies on kernel drivers to work – one kernel version, one camera driver. Note on supported Nvidia Jetson Boards and Jetpack versions, please refer to Supported JetPack Version for Different NVIDIA Jetson Platforms to ensure compatibility.
★ SUPPORTED PLATFORM DISCLAIMER
This camera is specifically designed for the official NVIDIA® Jetson™ Developer Kit by default and does not support third-party carrier boards.（不支援第三方載板）
〔Camera〕：
- Sony 8MP IMX219 Sensor
- Video Modes：1080p47, 1640 × 1232p41 and 640 × 480p206
- Sensor Resolution：3280 × 2464 pixels
- Sensor image area：3.68 x 2.76 mm (4.6 mm diagonal)
- Pixel Size：1.12 µm x 1.12 µm
- Optical Size：1/4"
- IR Sensitivity：Integral IR-cut Filter, visible light only
- Supported Platform：Raspberry Pi 5/4B/3B+/3/2/CM3/CM4/CM5/Zero W/Zero 2 W
【Lens】鏡頭：
- Focus Type：Manual Focus 手動對焦
- Focal Length：0.76mm焦距
- F.NO：F2.1
- Field of View(FOV)：220°(H)
- Lens Mount：M12 Mount
＜更換鏡頭圖解＞
ＰＳ．安裝說明圖上的鏡頭非此賣場鏡頭
【Applications】應用：
- Robots, Drones
- Action Cameras
- 3D scanning applications
- Field animal camera
- Recording slow motion
- Machine vision, etc.
| 選購商品 |  | | | |
