※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
OAK-1 W PoE（IMX378 WFOV）12MP 乙太網攝像頭模組，適用Luxonis原廠 Depth AI OAK
OAK-1-PoE：IMX378+Intel Movidius Myriad X for Depth AI OAK
【２個版本可選】：
＊12MP IMX378 IMX378 WFOV
＊1MP OV9782 WFOV
【影片】：https://youtu.be/PQ9vUb6Em3c
［清單］：
- OAK-1-W PoE camera 攝像頭模組
- Ethernet cable, 2m 線
- Cable gland
Note： PoE injector / switch is required to power the device and it is not included in the packaging. If you need an injector, you can buy it here.
［Key Features］特點：
- Either 120° or 150° DFOV depending on variant chosen
- Rugged IP67 rated enclosure
- 4 TOPS of processing power
- RJ45 for power delivery and communication
PoE version of OAK-1. Recently introduced model combining OAK-1 PoE body (and IP67 rating) with a new range of applications brought about by wide field of view camera.
OAK-1的 PoE 版本。
最近推出的型號將 OAK-1 PoE 機身（和 IP67 等級）與廣角攝影機帶來的一系列新應用相結合。
- Color camera 彩色相機
- Sensor： IMX378
- DFOV / HFOV / VFOV： 120° / 95° / 70°
- Resolution： 12MP（4056x3040）
- Focus： FF: 60cm - ∞
- Max Framerate： 60 FPS
OAK -1 W PoE 底板上有一個板載攝像頭，可實現 RGB 視覺，直接傳輸到 OAK-SoM-Pro 進行深度和 AI 處理。
然後，數據通過USB 3.1 Gen1（Type-C） 或1000BASE-T乙太網連接輸出到主機。
OAK-1-PoE 板公開啟動選擇開關，允許最終使用者從 USB 或板載eMMC 或 NOR 快閃記憶體引導 OAK-SoM-Pro模組。
【OAK-1 PoE 有２種型號：12MP DFOV 為 120°和1MP DFOV 為 150°】
＊12MP 捲簾快門攝影機，DFOV 為 120°
＊1MP 全域快門攝影機，DFOV 為 150°
OAK-1 W PoE is an 12MP AI camera that features on-device Neural Network inferencing and Computer Vision capabilities. It can capture high-resolution images, run custom AI models, and perform advanced computer vision tasks. It uses PoE for both power and GigE connectivity.
Wide FOV allows you to capture more area in one shot, which can be especially useful for：
- Multi-camera setup, to reduce the number of cameras needed to cover the whole area
- AMRs, to cover larger area and to get more features for localization and 3D mapping - see VIO/SLAM documentation for more information
- Object tracking/counting, for example vehicle or people counting over a larger area
PoE connection allows cameras to communicate to other computers via networking protocols (TCP, UDP, HTTP, MQTT, etc.). As our PoE models feature device flash memory, you can also run your programs in standalone mode. OAK PoE cameras are housed in an rugged, IP-rated enclosure, which is required for industrial and outdoor use.
We suggest following PoE deployment guide as the first steps after installation.
【RVC2 architecture on-board features】：
- 802.3af PoE Power
- 1gbps Ethernet
- IP67 Sealed
- 4 TOPS of processing power (1.4 TOPS for AI - RVC2 NN Performance)
- Run any AI model, even custom architectured/built ones (models need to be converted)
- 〔Encoding〕： H.264, H.265, MJPEG - 4K/30FPS, 1080P/60FPS
- 〔Computer vision〕： warp (undistortion), resize, crop via ImageManip node, edge detection, feature tracking. You can also run custom CV functions.
- 〔Object tracking〕： 2D tracking with ObjectTracker node
- 16GB eMMC internal storage
- Power consumption up to 5.5W. For more information check the technical specification.
- Industrial grade aluminum housing with Front Gorilla Glass
- 1/4" tripod mount and 45mm M3 mount
- Dimension: 82x114x32 mm
- Weight: 294g
【Power and connectivity】
〔Power-over-Ethernet (PoE)〕
The base board offers full 802.3af, Class 3 PoE compliance with 1000BASE-T speeds (1Gbps). PoE injector/switch is required to power the device. If need an injector, you can buy it here.
〔Power consumption〕
Most of the power is consumed by the RVC2, so the power consumption mostly depends on the workload of the VPU：
- Base Consumption + Camera Streaming／基本耗電量 + 相機串流：2.5W - 3W
- PoE Circuitry／PoE 電路：0.5W
- AI Subsystem Consumption／AI子系統耗電量：最高1W
- Stereo depth pipeline subsystem／立體深度管路子系統：高達 0.5W
- Video Encoder Subsystem／視訊編碼器子系統：最高 0.5W
So the total power consumption can be up to ~5.5W if you are using all the features at 100% at the same time. To reduce the power consumption, you can reduce FPS of the whole pipeline - that way, subsystems won’t be utilized at 100% and will consume less power.
【Operating characteristics】
〔Water resistance〕
This camera is shipped with IP67 rated enclosure. More details can be found here.
〔Temperature〕
The ambient operating temperature of RVC2 based devices is between -20°C and 50°C when fully utilizing the VPU. To find out more, see our operating temperature range documentation.
【Getting started】
For more information on how to start with POE devices, check our PoE deployment guide.
This OAK PoE camera accepts power input from he 802.3af, Class 3 PoE circuitry. It can also accept power through the on-board USB C connector - which is not exposed through the enclosure, so enclosure needs to be removed.
Booting can be accomplished from either the USB interface or from the eMMC or NOR flash on the OAK-SoM-Pro, and boot selection is configured with the DIP switch bank near the USB connector.
Interfacing with the OAK-SoM-Pro is also possible with PoE Board connector pads J5 and J8, which expose OAK-SoM-Pro auxiliary I/O and BW2099 Quad SPI, respectively. These headers are Amphenol/FCI 20021121-00010T1LF or equivalent.
- The reset button resets the OAK-SoM-Pro only.／重置按鈕僅重置
- The 5V LED indicates 5V power is present on the BW2098POE.
- The PG LED indicates “power good” from the OAK-SoM-Pro.
- The “RUN” LED indicates that the OAK-SoM-Pro is not in reset.
Caution should be taken when handling any PoE circuit board. Do not directly touch the circuitry as potentials up to and exceeding 57V may exist. Always use electronics handling best practices.／處理任何 PoE 電路板時都應小心謹慎。請勿直接觸摸電路，因為可能存在高達甚至超過 57V 的電位。始終採用電子設備處理最佳實務。
