※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
OAK-1 PoE（自動對焦AF（Auto-Focus攝像頭模組） IMX378 12MP 乙太網攝像頭模組，適用Luxonis原廠 Depth AI OAK
OAK-1-PoE：IMX378+Intel Movidius Myriad X for Depth AI OAK
【3個版本可選】：
＊12MP IMX378（２選１：
＞＞＞自動對焦AF（Auto-Focus）A00124／
＞＞＞定焦FF（Fixed-Focus）OAK-1-PoE-FF
＊32MP IMX358 自動對焦AF
（Auto-Focus）OAK-1-MAX-PoE
【影片】：https://youtu.be/6JVTYxwQd6g
［清單］：
- OAK-1 PoE camera 攝像頭模組
- Ethernet cable, 2m 線
- Cable gland
Note： PoE injector / switch is required to power the device and it is not included in the packaging. If you need an injector, you can buy it here.
［Key Features］特點：
- Rugged IP67 rated enclosure 外殼
- 12 MP RGB camera available in auto-focus and fixed-focus variants or 32MP in auto-focus
- 4 TOPS of processing power
- RJ45 for power delivery and communication
PoE version of OAK-1. IP67 rated enclosure able to withstand a more challenging environment, RJ45 ethernet connector for power and communication, newly with additional fixed-focus camera option and wide field of view brother model OAK-1 Wide PoE.
OAK-1的 PoE 版本。
IP67等級外殼能夠承受更具挑戰性的環境，RJ45 乙太網路連接器用於電源和通信，新增加了附加定焦攝影機（ fixed-focus）選項和廣角（wide field）兄弟型號OAK-1 Wide PoE。。
- Color camera 彩色相機
- Sensor： IMX378
- Type： Auto-Focus
- DFOV / HFOV / VFOV： 78° / 66° / 54°
- Resolution： 12MP（4056x3040）
- Focus： AF: 8cm - ∞
- Max Framerate： 60 FPS
OAK -1 PoE 基板有一個板載攝像頭，可實現 RGB 視覺，直接通過管道連接到 OAK-SoM-Pro 中，用於深度和 AI 處理。然後，數據通過USB 3.1 Gen1（Type-C） 或1000BASE-T乙太網連接輸出到主機。OAK-1-PoE 板公開了引導選擇開關，允許最終使用者從 USB 或板載eMMC 或 NOR 快閃記憶體引導 OAK-SoM-Pro模組。
【OAK-1 PoE 有２種型號：固定對焦和自動對焦】
Fixed-Focus 變體將鏡頭機械固定到位，
Auto-Focus 變體具有動態控制鏡頭位置的電磁鐵。
兩種型號都可以清楚地看到 50 公分及更遠的物體。
＊自動對焦 Auto-Focus：對於距離設備 8CM ~ 50CM 之間的近距離物體，建議使用自動對焦攝影機（請參閱影片）。也可以利用 DepthAI API 將它們手動設定到特定的焦點位置。
＊固定對焦（定焦） Fixed-Focus ：建議將定焦攝影機用於重型振動應用，例如無人機、割草機或車輛（請參閱影片）。
我們還提供具有寬視野的版本：OAK-1-W PoE.
【RVC2 architecture on-board features】：
- 802.3af PoE Power
- 1gbps Ethernet
- IP67 Sealed
- 4 TOPS of processing power (1.4 TOPS for AI - RVC2 NN Performance)
- Run any AI model, even custom architectured/built ones (models need to be converted)
- 〔Encoding〕： H.264, H.265, MJPEG - 4K/30FPS, 1080P/60FPS
- 〔Computer vision〕： warp (undistortion), resize, crop via ImageManip node, edge detection, feature tracking. You can also run custom CV functions.
- 〔Object tracking〕： 2D tracking with ObjectTracker node
- 16GB eMMC internal storage
- Power consumption up to 5.5W. For more information check the technical specification.
- Industrial grade aluminum housing with Front Gorilla Glass
- 1/4" tripod mount and 45mm M3 mount
- Dimension: 82x114x32 mm
- Weight: 294g
【Power and connectivity】
〔Power-over-Ethernet (PoE)〕
The base board offers full 802.3af, Class 3 PoE compliance with 1000BASE-T speeds (1Gbps). PoE injector/switch is required to power the device. If need an injector, you can buy it here.
〔Power consumption〕
Most of the power is consumed by the RVC2, so the power consumption mostly depends on the workload of the VPU：
- Base Consumption + Camera Streaming／基本耗電量 + 相機串流：2.5W - 3W
- PoE Circuitry／PoE 電路：0.5W
- AI Subsystem Consumption／AI子系統耗電量：最高1W
- Stereo depth pipeline subsystem／立體深度管路子系統：高達 0.5W
- Video Encoder Subsystem／視訊編碼器子系統：最高 0.5W
【Operating characteristics】
〔Water resistance〕
This camera is shipped with IP67 rated enclosure. More details can be found here.
〔Temperature〕
The ambient operating temperature of RVC2 based devices is between -20°C and 50°C when fully utilizing the VPU. To find out more, see our operating temperature range documentation.
【Getting started】
For more information on how to start with POE devices, check our PoE deployment guide.
This OAK PoE camera accepts power input from he 802.3af, Class 3 PoE circuitry. It can also accept power through the on-board USB C connector - which is not exposed through the enclosure, so enclosure needs to be removed.
Booting can be accomplished from either the USB interface or from the eMMC or NOR flash on the OAK-SoM-Pro, and boot selection is configured with the DIP switch bank near the USB connector.
Interfacing with the OAK-SoM-Pro is also possible with PoE Board connector pads J5 and J8, which expose OAK-SoM-Pro auxiliary I/O and BW2099 Quad SPI, respectively. These headers are Amphenol/FCI 20021121-00010T1LF or equivalent.
- The reset button resets the OAK-SoM-Pro only.／重置按鈕僅重置
- The 5V LED indicates 5V power is present on the BW2098POE.
- The PG LED indicates “power good” from the OAK-SoM-Pro.
- The “RUN” LED indicates that the OAK-SoM-Pro is not in reset.
Caution should be taken when handling any PoE circuit board. Do not directly touch the circuitry as potentials up to and exceeding 57V may exist. Always use electronics handling best practices.／處理任何 PoE 電路板時都應小心謹慎。請勿直接觸摸電路，因為可能存在高達甚至超過 57V 的電位。始終採用電子設備處理最佳實務。
