產品說明0

※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！

型號：B0272，Arducam 12MP IMX477P 電動對焦高質量相機 適用 Raspberry Pi

 

Arducam 12.3MP IMX477 M12 攝像機模塊 HQ Camera（B0272）樹莓派

Arducam 12MP IMX477 Motorized Focus High Quality Camera for Raspberry Pi

 

 

• The intuitive focus control: Fine-tune the focus with keyboard arrow keys.
• 直觀的焦點控制：使用鍵盤箭頭鍵微調焦點。
  
• The automated focus control: Autofocus with OpenCV examples
  
• 自動聚焦控件：帶有OpenCV示例的自動聚焦

［Package Including 清單］：

• 1 × Arducam 12MP IMX477P Motorized Focus High Quality Camera for Raspberry Pi with lens／Arducam 12MP IMX477P HQ Camera
• 1 × 300mm 15pin-22pin flex ribbon cable for Raspberry Pi normal variants (Model As and Bs)／30cm 15P 轉 22P
• 1 × 300mm 22pin-22pin flex ribbon cable for Raspberry Pi Zero and Compute Module／30cm 22pin 轉 22pin

• The Raspberry Pi board is not included in the package
• It is not recommended to replace the default lens on the camera module, contact us first if needed
• Our camera module support 4-lane in hardware, but the 4-lane camera driver requires extra customization. Here is why:
  1. Standard Raspberry Pi and Jetson Nano/Xavier NX can’t physically support a 4-lane connection (both of them only have 2-lane CSI connectors). Only the Raspberry Pi Compute Module and some 3rd party Jetson Carrier Boards come with 4-lane hardware support. Therefore, it’s not a general need.
  2. Extra work, specifically camera drivers, is required for a 4-lane connection other than the 4-lane physical connector. And the drivers are limited by the performances of the platform itself. For example, 4-lane can’t unlock 4k video on Raspberry Pi because the VideoCore does not currently support it. Jetson Nano is also to some extent limited because of the encoding capabilities. You need to make sure you really need it.

視頻：https://youtu.be/Vx2hGb7Vwu0

 

Description

       This Arducam IMX477 High Quality motorized focus camera module integrates a motor that could be controlled by software for a smarter focus, and you will no longer focus the camera by screwing the lens with your bare hands. Instead, keyboard keys or OpenCV can be used to remotely control the focusing process of your HQ camera.

       該Arducam IMX477高質量電動對焦攝像頭模塊集成了一個可由軟件控制的馬達，以實現更智能的對焦，並且您將不再用裸手擰緊鏡頭來對焦。而是可以使用鍵盤鍵或OpenCV遠程控制HQ攝像機的聚焦過程。

［Features］特徵：

• 12MP IMX477 High Quality Camera - The same image sensor used in Raspberry Pi High Quality Camera. Natively works with existing commands, codes and examples.／　　12MP IMX477高質量相機-與Raspberry Pi高質量相機中使用的圖像傳感器相同。本機可與現有命令，代碼和示例一起使用
  
• I2C Focus Control - The focusing process is controlled via software instead of your bare hands. Use keyboard arrows keys to adjust the focus to the best or OpenCV autofocus examples to automate it.　／　　I2C聚焦控制-聚焦過程是通過軟件而不是徒手控制的。使用鍵盤上的箭頭鍵將焦點調整到最佳狀態，或者使用OpenCV自動對焦示例將其自動化。

 

［Specification］

［Image 傳感器］

• 傳感器型號 Sensor Model: IMX477
  
• 快門類型 Shutter Type: Rolling shutter 捲簾
• 傳感器分辨率 Sensor resolution: 4056 x 3040 pixels, 12.3MP
  
• 圖像傳感器格式 Image Sensor Format: Type 1/2.3″
• 像素大小 Pixel Size: 1.55 µm x 1.55 µm

［Lens Assembly 鏡頭］

• 型號 Model No: M23390H08 
• 光學格式 Optical Format: 1/2.3” 英寸
• 焦距 Focal Length: 3.9mm
• 光圈 Aperture: F2.8
  
• 視場 Field of View (FOV): 75° (H) on Raspberry Pi High Quality Camera, 50°(H) on Raspberry Pi V1/V2 Camera 
   在Raspberry Pi高質量相機上為75°（H），在Raspberry Pi V1 / V2相機上為50°（H）
  
• 安裝 Mount: M12 mount
• 後焦距 Back Focal Length: 4.49mm
• MOD: 0.3m
  
• 尺寸 Dimension: Φ14×18.67mm
• 重量 Weight: 5g

［Camera Board］底板

• 面板尺寸 Board Size: 38mm×38mm
• 孔距 Hole Pitch: Compatible with 29mm, 30mm, 34mm

相關文件

相關資訊

問與答