產品說明0
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
Pocket Geiger Radiation Sensor - Type 5
SEN-14209
輻射觀測的 5型袖珍蓋革輻射傳感器是為嵌入式系統市場設計的高靈敏度輻射傳感器。該傳感器能夠檢測Gamma和Beta輻射，具有簡單的脈衝輸出，可以與任何微控制器配合使用。Radiation Watch有一些文檔和示例Arduino代碼來啟動和運行。他們還用C＃（包括源代碼）編寫了一個Windows示例程序，將圖形輸出到使用Arduino作為閱讀器的計算機上。
這些小型蓋革傳感器的測量範圍為0.05uSv / h到10mSv / h，在0.01cpm到300kcpm之間，所需的測量時間為2分鐘。Pocket Geiger具有板載直流升壓電路，因此可以提供友好的3V至9V的電路板。僅使用30mW（10mA @ 3V），功耗非常低。此外，櫃檯還配有可選的外殼和3.5毫米電纜。
注意：本產品僅用於教育目的，不應直接依賴於有關健康或安全的決定。
產品包括：
- 帶電磁屏蔽的Type5蓋革傳感器板
- 黃銅板（附加阻擋β粒子）
- 16“TRRS電纜
- 塑料外殼
- 額外的3.5mm TRRS插孔
Description:
The Type 5 Pocket Geiger Radiation Sensor from Radiation Watch is a highly sensitive radiation sensor designed for the embedded systems market. Capable of detecting Gamma and Beta radiation, this sensor has a simple pulsed output that can be used with any microcontroller. Radiation Watch has a handful of documents and example Arduino code to get you up and running. They have also written a Windows example program in C# (source included!) to output graphs to a computer using an Arduino as the reader.
These small Geiger sensors feature a measurement range of 0.05uSv/h to 10mSv/h at 0.01cpm to 300Kcpm with a required measurement time of two minutes. The Pocket Geiger has an onboard DC boost circuit, so the board can be supplied with a friendly 3V to 9V. Using only 30mW (10mA @ 3V), it is very low power. Additionally, the counter comes with an optional enclosure and 3.5mm cable.
Note: This product is for educational purposes and should not be directly relied upon for determinations regarding one’s health or safety.
Product Includes:
- Type5 Geiger Sensor board with copper EM shielding
- Brass plates (attach to block beta particles)
- 16” TRRS cable
- Plastic enclosure
- Extra 3.5mm TRRS jack
Features:
Documents:
