產品說明1
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
Arducam Mini Module Camera Shield 5MP Plus OV5642 Camera Module for Arduino UNO Mega2560 Board & Raspberry Pi Pico
適用於Arduino UNO、Mega2560開發板、Raspberry Pi Pico的Arducam迷你模塊Camera Shield 5MP Plus OV5642相機模塊
ＰＳ．B0068 鏡頭從4mm M12鏡頭，更新為4.9mm M12鏡頭（U6067）、相同的程式和韌體
【清單】：
- 1pcs MINI Arducam module Camera Shield w/ 5MP OV5642 for Arduino UNO Mega2560 board
1個MINI Arducam模塊相機護板，帶5MP OV5642用於Arduino UNO Mega2560板 - 1pcs Dupont Cable / 1根杜邦線
NOTE: Arduino UNO is not included / 注意： 不包括Arduino UNO
Item Description:
ArduCAM-M-5MP is optimized version of ArduCAM shield Rev.C, and is a high definition 5MP SPI camera, which reduce the complexity of the camera control interface. It integrates 5MP CMOS image sensor OV5642, and provides miniature size, as well as the easy to use hardware interface and open source code library. The ArduCAM mini can be used in any platforms like Arduino, Raspberry Pi, Maple, Chipkit, Beaglebone black, as long as they have SPI and I2C interface and can be well mated with standard Arduino boards. ArduCAM mini not only offers the capability to add a camera interface which doesn’t have in some low cost microcontrollers, but also provides the capability to add multiple cameras to a single microcontroller.
ArduCAM-M-5MP是ArduCAM shield Rev.C的優化版本，是高清5MP SPI攝像機，可降低攝像機控制接口的複雜性。它集成了5MP CMOS圖像傳感器OV5642，並提供微型尺寸以及易於使用的硬件接口和開源代碼庫。只要ArduCAM mini具有SPI和I2C接口並且可以很好地與標準Arduino板配合使用，就可以在Arduino，Raspberry Pi，Maple，Chipkit，Beaglebone黑色等任何平台上使用。ArduCAM mini不僅具有添加某些低成本微控制器所沒有的攝像頭接口的功能，而且還具有向單個微控制器添加多個攝像頭的功能。
【Application】應用 :
- IoT cameras ／物聯網相機
- Robot cameras ／機器人相機
- Wildlife cameras ／野生動物相機
- Other battery-powered products／其他電池供電產品
- Can be used in MCU, Raspberry Pi, ARM, DSP, FPGA platforms
可用於MCU，Raspberry Pi，ARM，DSP，FPGA平台
【Key Specifications】規格 :
- 有效陣列大小 / Active array size：2592x1944
- SPI速度 / SPI speed：Max 8MHz
- 快門 / Shutter：rolling shutter 捲簾
- 幀緩衝區 / Frame buffer：8MByte
- 像素尺寸 / Pixel Size：1.4µm x 1.4µm
- 默認M12鏡頭 / Default M12 Lens：55°
- 分辨率支持 / Resolution support：5MP, 1080p, 720p, VGA, QVGA
- 格式支持 / Format support：RAW, YUV, RGB, JPEG
- Size：34 x 24 mm
- Weight：20g
- 溫度 / Temperature：-10°C～+55°C
- 【鏡頭規格】 / Lens Specification: sensor size: 1/2.7″; EFL:4mm; F/N:1.8; BFL:6.68mm; HFOV: 56 degree (SKU: U1462)
傳感器尺寸：1 / 2.7“；EFL：4毫米；F / N：1.8；螢光燈：6.68mm; HFOV：56度（SKU：U1462）
【Current and Power consumption (5V input)】：電流和功耗（5V輸入）
- Single Chip Microcomputer without MINI 5MP Plus
沒有MINI 5MP Plus的單片機
- - Single Chip Microcomputer without MINI 5MP Plus
不帶MINI 5MP Plus的單片機
- Current: 40mA, Power Consumption: 0.2W;
電流：40mA，功耗：0.2W；
- - Nomal mode with MINI 5MP Plus
帶有MINI 5MP Plus的正常模式
- Current: 260mA, Power Consumption: 1.3W;
電流：260mA，功耗：1.3W；
- - Low Power mode with MINI 5MP Plus
使用MINI 5MP Plus的低功耗模式
- Current: 90mA, Power Consumption: 0.45W;
電流：90mA，功耗：0.45W；
【Current and Power consumption (3.3V input)】：電流和功耗（3.3V輸入）
- - Nomal mode with MINI 5MP Plus
帶有MINI 5MP Plus的正常模式 - Current: 223mA, Power Consumption: 0.74W;
電流：223mA，功耗：0.74W；
【Features】：特徵
- 5MP image sensor OV5642
5MP圖像傳感器OV5642
- M12/CS mount replaceable lens
M12 / CS卡口可更換鏡頭 - I2C interface for the sensor configuration
I2C接口用於傳感器配置 - SPI interface for camera commands and data stream
SPI接口，用於攝像頭命令和數據流 - Support external hardware trigger input
支持外部硬件觸發輸入 - All IO ports are 5V/3.3V tolerant
所有IO端口均可承受5V / 3.3V電壓 - Well mated with standard Arduino boards
與標準Arduino板配合良好 - Provide open source code library for Arduino, ESP8266, Raspberry Pi, etc
提供用於Arduino，ESP8266，Raspberry Pi等的開源代碼庫
相關文件
Additional Resources:
【延伸系列說明】
Mini module Camera Shield w/5 MP OV5642 for Arduino UNO Mega2560 board
ArduCAM Mini 
相關資訊
注意： 如果要更換鏡頭，請從M12鏡頭套件中選擇鏡頭：
Note: If you would like to change the lens, please choose the lens from the M12 lens kit here:
＊SKU: LK001 Arducam M12 mount camera lens kit for Arduino and Raspberry Pi camera
適用於Arduino和Raspberry Pi相機的LK001 Arducam M12安裝相機鏡頭套件
＊SKU: LK002 Arducam Low Distortion M12 mount camera lens kit for Arduino and Raspberry Pi camera
LK002 Arducam低失真M12安裝相機鏡頭套件，用於Arduino和Raspberry Pi相機
