產品說明0
※本產品原廠代理從國外進口,有些交期較長,下訂前請詢問!
OV5647 Camera Board /w CS mount Lens fully compatible with Raspberry Pi 4/3B+/3 Camera
OV5647攝像頭板/帶4mm CS接口鏡頭,完全兼容樹莓派4/3B+/3攝像頭
B0032,Arducam原廠 OV5647攝像頭新版,帶CS mount Lens 兼容樹莓派Pi3B、Pi3B+、Pi4B
【Package Including】
- 1 x Camera Board /w CS mount Lens(LS-2717CS) fully compatible with official Raspberry Pi Camera board
- 1 x 15cm 15pin FPC cable
overview
- An Improvement of Standard Pi Camera: With the CS mount lens, you can get a bit more clarity, focus, and the ability to change the lens
- Works Flawlessly: Native to Raspberry Pi and can use libcamera apps to capture images
- Customization Service: please contact sales@arducam.com if you want more options
In order to meet the increasing need of Raspberry Pi compatible camera modules. The ArduCAM team now released a revision C add-on camera module which is fully compatible with official Raspberry Pi board. It optimizes the optical performance than the previous Pi cameras, and give user a much clear and sharp image. Also it provides the FREX and STROBE signals which can be used for multi-camera synchronize capture with proper camera driver firmware.
It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras.
The camera is connected to the BCM2835/BCM2836 processor on the Pi via the CSI bus, which travels along the ribbon cable that attaches the camera board to the Pi.
Specifications
Sensor | Omnivision OV5647 sensor |
Optical Size | 1/4” (OV5647) |
Resolution | 5MP 2592×1944 |
Frame Rates | 1080p 30 fps, 720p 60fps, 480p 90fps |
IR Sensitivity | Integral IR-cut filter |
Field of View(FOV) | 54°(H) |
Focus Type | Manual Focus |
Lens Type | CS Lens |
Peaking Current | 300mA |
- 特徵
- 高清視頻攝像頭樹莓派型A / B / B +和樹莓派2
- 豪威OV5647傳感器與可更換鏡頭固定對焦模塊中
- 透鏡座:M12x0.5,CS型或C卡口
- 5MPixel傳感器
- 積分紅外濾光片
- 靜態圖片分辨率:2592點¯x1944年
- 最大視頻分辨率:1080
- 最大幀速:30幀
- 支持FREX /頻閃功能
- 尺寸:36×36毫米
- 15厘米平面帶狀電纜15針MIPI攝像機串行接口(CSI)連接器
Note
- Raspberry Pi is not included in the package/不含主板
- The Camera Lens for Raspberry Pi Camera Board is LS-2717CS
Applications
- Cellular phones,PDAs,Toys
- Home security system
- monitoring Octoprint 3D printer
- PC multimedia
- Digital still cameras,etc.
相關文件
【舊版說明】,已停產改版
OV5647 Camera Board /w CS mount Lens fully compatible with Raspberry Pi