產品說明1
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
Sparkfun原廠 MyoWare 2.0 Cable Shield (DEV-18386) 肌肉配件：連線板 接線板 連接器
影片：https://youtu.be/d1oUHqPa35I
The MyoWare® 2.0 Muscle Sensor is designed to be wearable, allowing you to attach biomedical sensor pads directly to the board itself. However, there still may be cases where you want to mount the sensor pads away from the board; this is where the MyoWare® 2.0 Muscle Sensor comes in. The shield includes a 3.5mm TRS jack where you can attach a traditional three electrode sensor cable, allowing you to test and use the muscle sensor without actually attaching the board to your person.
MyoWare® 2.0 肌肉傳感器設計為可穿戴式，允許您將生物醫學傳感器墊直接連接到電路板本身。 但是，您仍然可能希望將傳感器墊安裝在遠離電路板的位置； 這就是 MyoWare 2.0 電纜屏蔽的用武之地。屏蔽包括一個 3.5 毫米 TRS 插孔，您可以在其中連接傳統的三電極傳感器電纜，使您無需實際將電路板連接到您的人即可測試和使用肌肉傳感器。
The MyoWare® 2.0 Muscle Sensor is also equipped with snap connectors on the board so you can easily stack it. Unlike the other shields in the MyoWare 2.0 ecosystem, this board snaps to the bottom side of the MyoWare® 2.0 Muscle Sensor . Use this shield for non-wearable projects that are housed in an enclosure or that target muscles that are too small or situated such that the on-board electrode sockets would not be suitable.
MyoWare 2.0 Cable Shield 在板上還配備了卡扣連接器，因此您可以輕鬆堆疊它。 與 MyoWare 2.0 生態系統中的其他防護罩不同，該闆卡在 MyoWare 2.0 肌肉傳感器的底部。 將此防護罩用於安裝在外殼中的非可穿戴項目或目標肌肉太小或位置太小，以至於板載電極插座不適合。
Note: MyoWare and the Cable Shield are not intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation treatment, or prevention of disease, in a man or other animals.
注意： MyoWare 和 Cable Shield 不適用於診斷人類或其他動物的疾病或其他狀況，或用於治愈、緩解治療或預防疾病。
The MyoWare® 2.0 ecosystem consists of shields that easily interface with the MyoWare® 2.0 Muscle Sensor, which is a low-cost, Arduino-compatible, all-in-one electromyography (EMG) sensor from Advancer Technologies. The innovative connector system allows users to easily snap shields together with a compact low profile and connect to a microcontroller's analog input to measure raw, filtered, and rectified electrical activity of a target muscle. This eliminates the need to solder connections between boards.
MyoWare® 2.0 生態系統由可輕鬆與 MyoWare® 2.0 肌肉傳感器接口的防護板組成，這是一款來自 Advancer Technologies 的低成本、與 Arduino 兼容的一體化肌電圖 (EMG) 傳感器。創新的連接器系統使用戶可以輕鬆地將防護罩與緊湊的薄型連接在一起，並連接到微控制器的模擬輸入，以測量目標肌肉的原始、濾波和整流電活動。這消除了在板之間焊接連接的需要。
This product is a collaboration with Brian Kaminski from Advancer Technologies. A portion of each sales goes back to them for product support and continued development.
該產品是與 Advancer Technologies 的 Brian Kaminski 合作推出的。每次銷售的一部分都會返回給他們，以獲得產品支持和持續開發。
- MyoWare® 2.0 Muscle Sensor Form Factor
- 3x Male Snap Pins (Input Electrodes)
- 1x 3.5mm TRS Connector
- Board Dimensions
- 37.57mm x 35.90mm (1.48” x 1.41”)
