NXP Cortex-M4 M0雙核處理器 ：LPC4357核心板，向下兼容LPC4350，LPC4330，LPC4320，LPC4310，LPC4353，LPC4337，LPC4333，Pin to Pin LPC1850，LPC1857。
核心板物理尺寸：57.2 * 77.2 mm
Cortex-M4 Processor
- running at frequencies of up to 204 MHz
- Memory Protection Unit (MPU)
- Nested Vectored Interrupt Controller (NVIC)
- Hardware floating-point unit
- Non-maskable Interrupt (NMI) inpu
- JTAG and Serial Wire Debug (SWD), serial trace
- ETM and ETB support
- System tick timer
- Four reduced power modes: Sleep, Deep-sleep, Power-down, Deep power-down
Cortex-M0 Processor core
- capable of off-loading the main ARM Cortex-M4
- running at frequencies of up to 204 MHz
- JTAG, Serial Wire Debug, and built-in NVIC
On-chip memory
- Up to 1024kB dual bank Flash
- 136 kB SRAM for code and data use
- 16 kB on-chip EEPROM data memory.
- 64 kB ROM containing boot code, on-chip SW drivers
- 128 bit One-Time Programmable (OTP) memory
Clock generation unit
- Crystal oscillator (operating range of 1 MHz to 25 MHz)
- 12 MHz internal RC osc.
- Ultra-low power RTC crystal osc.
- On-chip PLL allows CPU operation up to the maximum CPU rate
Serial interfaces
- Quad SPI Flash IF (SPIFI)
- 10/100T Ethernet MAC (RMII and MII IF)
- HS USB 2.0 Host/Device/OTG IF
- HS USB 2.0 Host/Device IF
- 4 550 UARTs
- 2 C_CAN 2.0B controller with one channel
- 2 SSP controllers
- SPI controller
- Fast-mode Plus I2C-bus IF
- standard I2C-bus IF
- 2 I2S IFs
Digital peripherals
- External Memory Controller (EMC)
- LCD controller
- SD/MMC card IF
- 8-channel General-Purpose DMA (GPDMA) controller
- Up to 164 General-Purpose Input/Output (GPIO) pins
- 4 general-purpose timer/counters
- motor control PWM for three-phase motor control
- Quadrature Encoder IF (QEI)
- Repetitive Interrupt timer (RI timer)
- Windowed watchdog timer
- Ultra-low power Real-Time Clock (RTC)
- Alarm timer
Analog peripherals
- 10-bit DAC
- 2 10-bit ADCs
Security
- AES engine programmable through an on-chip API
- 2 128-bit secure OTP memories (AES key storage, customer use)
- Unique device ID
