產品說明0
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
Kitronik Air Quality Datalogging Board for Pico (DEV-19521)
DESCRIPTION
The Kitronik Smart Air Quality Board for Pico provides a complete air monitoring and reporting solution for the Raspberry Pi Pico. The wealth of onboard sensors and connection points allow you to log, store and display data effectively with the Pico filesystem and an OLED screen. There are also connection points for external devices, such as analogue sensors, servos, motors, and heater pads.
Pico 的 Kitronik 智慧空氣品質板為樹莓派筆克提供完整的空氣監測和報告解決方案。豐富的板載感測器和連接點使您能夠使用 Pico 檔案系統和 OLED 螢幕有效地記錄、儲存和顯示數據。此外，還有外部設備的連接點，例如模擬感測器、伺服器、電機和加熱墊。
The board includes a dual row of pin sockets to connect your Raspberry Pi Pico. The Pico can then read inputs from a BME688 air quality and environmental sensor (temperature, pressure, humidity, air quality index and eCO2). The sensor, along with the RTC and flash memory on the Pico means the board is well set up for data logging. There is a black and white 128x64 OLED display screen and 3 status ZIP LEDs for visually displaying data, a piezo buzzer for audio and two buttons for user input. There are also external connections: 2 1A outputs, a servo output, an extension connection for more ZIP LEDs and analogue input connections linking to the Pico ADC (various other Pico pins are broken out to 0.1” pitch solder pads as further inputs and outputs, along with pads for 3V and GND).
該板包括一個雙排引腳插座，用於連接您的樹莓派筆劃。然後，Pico 可以從 BME688 空氣品質和環境感測器讀取輸入（溫度、壓力、濕度、空氣品質指數和 eCO2）。該感測器以及 Pico 上的 RTC 和快閃記憶體意味著該板已針對數據記錄進行了良好的設置。有一個黑白128x64 OLED顯示幕和3個狀態ZIP LED用於直觀顯示數據，一個用於音訊的壓電蜂鳴器和兩個用於使用者輸入的按鈕。還有外部連接：2 個 1A 輸出、一個伺服輸出、一個用於更多 ZIP LED 的擴展連接和連接到 Pico ADC 的類比輸入連接（其他各種 Pico 引腳被分解為 0.1“ 間距焊盤作為進一步的輸入和輸出，以及用於 3V 和 GND 的焊盤）。
Power is provided via the 3xAA battery holder or the ‘POWER’ terminal block. The voltage supply is controlled using a power switch, with a green LED to indicate when the board is turned on. The Pico also produces a regulated 3V supply which is used to power the BME688 sensor and OLED display screen.
通過 3xAA 電池座或「POWER」端子塊供電。電壓供應使用電源開關進行控制，綠色 LED 指示電路板何時導通。Pico 還產生一個穩定的 3V 電源，用於為 BME688 感測器和 OLED 顯示螢幕供電。
The ‘POWER’ terminal block can also be used as the connection point for a solar cell. NOTE: Please ensure the correct rechargeable batteries are fitted before charging, they should be NiMh.
“POWER”接線端子也可以用作太陽能電池的連接點。注意：請在充電前確保安裝了正確的可充電電池，它們應該是NiMh。
Kitronik has a MicroPython module to support the use of the Smart Air Quality Board. This can be found, along with example programs and a full README document, on the Kitronik GitHub.
Kitronik有一個MicroPython模組來支援使用智慧空氣品質板。這可以與示例程式和完整的README文檔一起在Kitronik GitHub上找到。
Note: Raspberry Pi Pico and AA Batteries sold separately.
注意：樹莓派筆克和AA電池單獨出售。
FEATURES
- An all-in-one Air Quality monitoring and reporting solution for the Raspberry Pi Pico.
為樹莓派筆克提供一體化空氣品質監測和報告解決方案。
- Measure temperature, pressure, humidity, air quality index, and eCO2.
測量溫度、壓力、濕度、空氣品質指數和 eCO2。
- The board features a black and white 128x64 OLED display screen for visually displaying data.
該板採用黑白128x64 OLED顯示幕，可直觀地顯示數據。
- The sensor, along with the RTC and flash memory on the Pico means the board is well set up for time-stamped data logging.
該感測器以及 Pico 上的 RTC 和快閃記憶體意味著該板已針對帶時間戳的數據記錄進行了良好的設置。
- The board also has 3 status ZIP LEDs for visually displaying data, a piezo buzzer for audio and two buttons for user input.
該板還具有 3 個用於直觀顯示數據的狀態 ZIP LED、一個用於音訊的壓電蜂鳴器和兩個用於使用者輸入的按鈕。
- There is an integrated two-row connector for the Raspberry Pi Pico to slot into.
有一個集成的兩排連接器，供Raspberry Pi Pico插入。
- There are connection points for external devices, such as analogue sensors, servos, motors, and heater pads.
外部設備有連接點，例如模擬感測器，伺服器，電機和加熱器墊。
- The board also features a connection point for a solar cell that can be used alongside rechargeable batteries to keep your experiments running for longer.
該板還具有太陽能電池的連接點，可與可充電電池一起使用，以保持實驗運行更長時間。
- Run long term monitoring experiments in the classroom throughout the school year.
在整個學年中在課堂上進行長期監測實驗。
- Length 長度 : 74mm.
- Width 寬度 : 72mm.
- Height 高度 (Max最大): 28.7mm.
- PCB Thickness 印刷電路板厚度 : 1.6mm.
DOCUMENTS
