※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
Kitronik Motor Driver Board 電機驅動板 for Raspberry Pi Pico (ROB-18776)
影片參考:https://youtu.be/BYm0vVIMs0w
DESCRIPTION
This board allows the Raspberry Pi Pico (connected via pin header) to drive two motors simultaneously with full forward, reverse & stop control, making it ideal for Pico controlled buggy projects. Alternatively, the board can be used to power a stepper motor. The board features the DRV8833 motor driver IC, which has built-in short circuit, over current and thermal protection.
該板允許Raspberry Pi Pico（通過引腳接頭連接）同時驅動兩個電機，並具有完全的前進，後退和停止控制，使其成為Pico控制的越野車專案的理想選擇。或者，該板可用於為步進電機供電。該板採用DRV8833電機驅動器IC，該IC具有內置短路、過流和熱保護功能。
The board has four external connections to GPIO pins and a 3V and GND supply from the Pico. This allows for additional IO options for your buggy builds that can be read or controlled by the Pico. In addition there is an on/off switch and power status LED, allowing you to see at a glance if the board is powered up and save your batteries when your project is not in use.
該板具有四個外部連接至 GPIO 引腳，以及一個來自 Pico 的 3V 和 GND 電源。這為您的錯誤構建提供了額外的IO選項，這些選項可以由Pico讀取或控制。此外，還有一個開/關開關和電源狀態LED，可讓您一目了然地看到電路板是否通電，並在專案未使用時節省電池。
To use the motor driver board, the Pico should have a soldered pin header and be inserted firmly into the connector. The board produces a regulated supply that is fed into the 40-way connector to power the Pico, removing the need to power the Pico directly. The motor driver board is powered via either screw terminals or a servo style connector.
要使用電機驅動板，Pico 應具有焊接引腳接頭，並牢固地插入連接器。該板產生一個穩壓電源，該電源饋入 40 路連接器，為 Pico 供電，無需直接為 Pico 供電。電機驅動板通過螺釘接線端子或伺服式連接器供電。
Kitronik has developed a MicroPython module and sample code to support the use of the Motor Driver board with the Pico. This code is available in the GitHub repo.
Kitronik開發了一個MicroPython模組和範例代碼，以支援將馬達驅動器板與Pico一起使用。此代碼在GitHub 儲存庫中可用。
Note: A Raspberry Pi Pico is not included with this board and will need to be purchased separately. Please see the Hookup Accessories section below for ordering options.
注意：Raspberry Pi Pico不包括在此板上，需要單獨購買。有關訂購選項，請參閱下面的連接配件部分。
FEATURES
- Length / 長度 : 63mm
- Width / 寬度 : 35mm
- Height / 高度 : 11.6mm
- PCB Thickness / 印刷電路板厚度 : 1.6mm
- Mounting Holes (Diameter) / 安裝孔 (直徑) : 3mm
- A compact yet feature-packed board designed to sit at the heart of your Raspberry Pi Pico robot buggy projects.
- 緊湊但功能豐富的電路板，旨在坐在Raspberry Pi Pico機器人越野車專案的核心。
- The board can drive two motors simultaneously with full forward, reverse, and stop control.
- 該板可以同時驅動兩個電機，並具有完全的前進、後退和停止控制。
- It features the DRV8833 motor driver IC, which has built-in short circuit, over current and thermal protection.
- 它具有DRV8833電機驅動器IC，該IC具有內置短路，過流和熱保護功能。
- Additionally, the board features an on/off switch and power status LED.
- 此外，該板還具有開/關開關和電源狀態 LED。
- Power the board via a terminal block style connector.
- 通過端子塊式連接器為電路板供電。
- The 3V and GND pins are also broken out, allowing external devices to be powered.
- 3V 和 GND 引腳也被分斷，從而允許外部設備供電。
- Code it with MicroPython via an editor such as the Thonny editor.
- 使用MicroPython通過諸如Thonny編輯器之類的編輯器對其進行編碼。
DOCUMENTS
