產品說明0
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
美國原廠 Stepper motor NEMA-17 size - 200 steps/rev 12V 350mA(ada324)
A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 350mA so that it could be driven easily with an Adafruit motor shield for Arduino (or other motor driver) and a wall adapter or lead-acid battery.
Some nice details include a ready-to-go cable and a machined drive shaft (so you can easily attach stuff). We drove it with an Adafruit motor shield for Arduino and it hummed along nicely at 250 RPM. To connect to our shield, put the wires in this order: Red, Yellow, skip ground, Green, Brown (or Gray)
- 200 steps per revolution, 1.8 degrees ／每轉200步，1.8度
- Bipolar stepper, requires an H-bridge!
- 4-wire, 12 inch leads
- 42mm/1.65" square body
- 31mm/1.22" square mounting holes, 3mm metric screws (M3)
- 5mm diameter drive shaft, 24mm long, with a machined flat
- 12V rated voltage (you can drive it at a lower voltage, but the torque will drop) at 350mA max current
- 28 oz*in, 20 N*cm, 2 Kg*cm holding torque per phase
- 35 ohms per winding
相關文件
An upgrade to the slider project
Control your stepper motors over the internet with Adafruit IO
Do the electric slide with Blinka!
Take awesome pictures of the night sky with this equatorial-mount astrophotography tracker.
