※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！

Grove - Solid State Relay V2 固態繼電器V2 (103020137)

Description

Instead of using coil, packaged solid-state relays(SSR) use power semiconductor devices such as thyristors and transistors, which provide a much faster switching speed than the mechanical relays. The Grove - Solid State Relay V2 is based on the high-quality G3MC202P module, which allows you to use a 5VDC to control MAX. 240VAC. With the help of Grove interface, it becomes very convenient to use the SSR with your arduino.

According to different application scenarios, we've prepared a series of solid state relays for you.

*Grove - Solid State Relay V2

*Grove - 2-Channel Solid State Relay

*Grove - 4-Channel Solid State Relay

*Grove - 8-Channel Solid State Relay

1*Please be careful when working with high voltage AC load, please do not operate with power on.

2*This relay only works with AC load, if you use DC load, once the relay is turned on, it will always stay on.
3*Due to the leakage current, we do not recommend you to use this relay with low power appliance.

1 *使用高壓交流負載時請務必小心，請勿在接通電源的情況下進行操作。

2 *此繼電器僅適用於交流負載，如果使用直流負載，一旦繼電器打開，它將始終保持開啟狀態。
3 *由於漏電流，我們不建議您將此繼電器與低功率設備一起使用。

Features

• Advantages over mechanical relays:
  
  1-Solid-state relays have much faster switching speeds compared with electromechanical relays, and have no physical contacts to wear out.
  2-Totally silent operation.
  3-No physical contacts means no sparking, allows it to be used in explosive environments, where it is critical that no spark is generated during switching.
  4-Increased lifetime, even if it is activated many times, as there are no moving parts to wear and no contacts to pit or build up carbon.
  5-Compact, thin-profile SSR of monoblock construction with an all-in-one lead frame incorporates a PCB, terminals and heat sink, which is much smaller than mechanical relays, and can integrate more channels. 

• Disadvantages:
  
  1-When closed, higher resistance (generating heat), and increased electrical noise.
  2-When open, lower resistance, and reverse leakage current.
  3-Only works for AC laod.

Typical Applications 

• Operations that require low-latency switching, e.g. stage light control. 
• Devices that require high stability, e.g. medical devices, traffic signals. 
• Situations that require explosion-proof, anticorrosion, moisture-proof, e.g. coal, chemical industries.

Pin Map

Schematic

Technical Details

Dimensions	40mm x 20mm x 25mm
Weight	G.W 131g
Battery	Exclude
Operating Input Voltage	4~6V
Rated Input Voltage	5V
Load Voltage Range	75 to 264 VAC 50/60 Hz
Rated Load Voltage	100 to 240 VAC 50/60 Hz
Load Current	0.1 to 2 A
Leakage Current	1.5 mA max. (at 200 VAC)
Insulation Resistance	1,000 MΩ min. (at 500 VDC)
Operating Temperature	-30°C to 80°C (with no icing or condensation)
Operating Humidity	45% to 85%RH
Zero Cross	support

Part List

Grove - Solid State Relay V2	1
Grove Cable	1
A set of Acrylic Shell	1

ECCN/HTS

ECCN	EAR99
HSCODE	85364110