產品說明2
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
Triple Axis Magnetometer Breakout - MAG3110
此產品是一款小型低功率的三軸數位磁力計，可以搭配三軸加速度計就可以產生定位精確的羅盤資料。具有一個I2C介面輸出和智慧嵌入式功能，如需更詳盡的產品說明可以參考原廠手冊。
特色：
- 1.95V~3.6V工作電壓
- 7bit I2C address = 0x0E
- 全刻度範圍±1000μT
- 0.10μT的靈敏度
原官方說明：
Description: Freescale’s MAG3110 is a small, low-power, digital 3-axis magnetometer. The device can be used in conjunction with a 3-axis accelerometer to produce orientation independent accurate compass heading information. It features a standard I2C serial interface output and smart embedded functions. It’s also a tiny QFN package which isn’t very easy to play with so here is our easy to use breakout board. This board breaks out all of the pins for the MAG3110 to a standard 0.1" header and also supplies the necessary filtering capacitors so that you can easily use it in your next navigation project.
Note: You will need to use a logic level converter if you are using an Arduino Uno or similar 5V logic device. Even if 3.3V is to be supplied to the VDD, an Uno putting out 5V logic can still fry this breakout.
Features:
- 1.95V to 3.6V Supply Voltage
- 7-bit I2C address = 0x0E
- Full Scale Range ±1000 μT
- Sensitivity of 0.10 μT
- Pull Up Resistor Jumper
Dimensions: 13.3 x 14.5 mm
Documents:
