產品說明0
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
SparkFun原廠 Pico Add-On Flipper for XRP (COM-28236)
Our Pico Add-On Flipper takes the standard pin out for any Raspberry Pi Pico development board and flips it over as if you had physically rotated it over (facing down).
我們的 Pico Add-On Flipper 可取出任何 Raspberry Pi Pico 開發板的標準引腳，並將其翻轉，就像您物理旋轉它一樣 （面朝下）。
Product Overview 產品概述
Anyone familiar with the Raspberry Pi Pico development boards has likely seen the various HAT (Hardware Attached on Top) accessory boards. If you are like us, you've likely encountered a simple design limitation: The HATs can only be connected in a single orientation!
熟悉 Raspberry Pi Pico 開發板的任何人都可能見過各種 HAT （頂部附加硬體） 配件板。如果您像我們一樣，您可能遇到了一個簡單的設計限制：HAT 只能以單一方向連接！
Whether a HAT is attached above or below a Raspberry Pi Pico, they all have a fixed orientation. At SparkFun, we have devised a simple solution to this problem: the SparkFun Pico Add-On Flipper for XRP. Our Pico Add-On Flipper takes the standard pin out for any Raspberry Pi Pico development board and flips it over as if you had physically rotated it over (facing down).
無論 HAT 是安裝在 Raspberry Pi Pico 上方還是下方，它們都有固定的方向。在 SparkFun，我們設計了一個簡單的解決方案來解決這個問題：用於 XRP 的 SparkFun Pico Add-On Flipper。我們的 Pico Add-On Flipper 可取出任何 Raspberry Pi Pico 開發板的標準引腳，並將其翻轉，就像您物理旋轉它一樣 （面朝下）。
How is this useful? Say you have a project that uses:
這有什麼用呢？假設你有一個項目使用：
A Raspberry Pi Pico development board must be in a specific orientation to access its USB connector. However, the wiring or connections to the perfect HAT for your project are wrong. With the Pico Add-On Flipper, you can flip those connections from the right side of the USB port to the left (or vice versa).
Raspberry Pi Pico 開發板必須處於特定方向才能存取其 USB 連接器。但是，與您的專案相符的完美 HAT 的接線或連接卻是錯誤的。使用 Pico Add-On Flipper，您可以 將 這些連接從 USB 連接埠的右側翻轉到左側（或反之亦然）。
The perfect HAT for your Experiential Robotics Platform (XRP) Kit is not intended to be attached on top of the Pico but underneath it—for example, a display board with a downward screen. With the Pico Add-On Flipper, you can take the display board (with hardware attached on the bottom) and flip it over to mount it as a HAT (above the Pico with the screen facing upward).
適合您的體驗式機器人平台 (XRP) 套件的完美 HAT 並非旨在安裝於 Pico 的頂部，而是安裝於其下方 - 例如，帶有向下螢幕的顯示板。使用 Pico Add-On Flipper，您可以取出顯示板（底部附有硬體）並將其翻轉以將其安裝為 HAT （位於 Pico 上方，螢幕朝上）。
We also provide a Qwiic connector and reset button on the edges of the Pico Add-On Flipper that users can easily access.
我們還在 Pico Add-On Flipper 的邊緣提供了 Qwiic 連接器和重置按鈕，方便使用者存取。
Documentation 文件
