洋天科技洋天科技
公司簡介訂購方式匯款確認檔案下載 聯絡我們保固說明訂單查詢討論區
電子郵件:

密碼:

忘記密碼
加入會員
  首頁 | 原廠 Arduino® | 特殊服務設計 | 轉接座及轉接板/麵包板 | 開發板/燒錄器/模擬器 | 相容 For Arudino® 週邊及配件 | OKdo系列 | Saleae 系列 | Adafruit 系列 | ArduCam 系列 | Camera 攝像頭 | ROCK 系列 | Debix系列開發板 | Raspberry Pi 樹莓派 | Banana Pi 香蕉派 | BeagleBone 狗骨頭 | M5Stack系列 | Micro:bit (BBC)系列 | NVIDIA Jetson Nano系列 | Pololu 系列 | Pycom 系列 | Seeed 系列 | Sparkfun 系列 | WeMos 系列 | 傳感器 | Cubieboard/CubieTruck系列 | Firefly 系列 | Microduino系列 | Orange Pi 香橙派 | PCB板 | PLC 系列 | Robot 機器人 | UDOO 系列 | RedBearLab 系列 | LattePanda系列 | LittleBits 系列 | Libelium 系列 | Luxonis 相機系列 | PCduino | RobotElectronics 系列 | MageDok 顯示屏 | LCD/LCM/TFT/LVDC | Dimension Engineer 系列 | 通訊模組 | 影音器材(含轉換器) | 線材/連結器/轉換器 | 測量儀器 | 馬達/馬逹控制器/電源模組 | 其他 | 焊接/維修工具 | IC零件 | LED燈-裝飾燈 | 工作站迷你電腦 mini PC | 擴大器 | 雕刻機 | 電池 | 電腦周邊 | 檢定考套件 | 停售商品
  首頁 » 商品目錄 » Sparkfun 系列 » 010218798
商品搜尋 進階
 |  購物車內容  |  結帳   
商品分類
  **Teensy
  *Cable 線材
  *FLIR 系列
  *Intel® Edison
  *IQAudio 系列
  *LED EL 燈條
  *LilyPad系列
  *MyoWare 肌肉系列
  *Qwiic系列
  Alchitry 系列
  Audio
  Camera 攝像頭
  Components
  Educators
  ESPRESSIF (ESP)
  IoT
  Programmers
  Prototyping
  Retail
  Robotics
  Swag
  Tools
  Widgets
  Arduino
  Biometrics
  Breakout Boards
  cellular
  Development Tools
  Drivers
  E-Textiles
  IC
  LCDs
  Product Categories
  Sensors
  空板
  GPS
  Kits
  Wireless
  停售/停產
Arduino
Pololu
Seeed
Sparkfun
robot-electronics
dimensionengineering
libelium
adafruit
udoo
redbearlab
Arducam
goembed
Saleae
okdo
服務台
公司簡介
退換貨服務
訂購方式
聯絡我們
匯款確認
[<< 前一頁]  瀏覽相同分類產品 30 / 36  [下一頁 >>]
●Sparkfun系列 美國原裝 LIDAR-Lite v3、Arduino 雷射測距模組 40M (SEN-14032)
NT$4,749
運費NT$50
條碼010218798
產品說明

 

 

※本產品原廠代理從國外進口,有些交期較長,下訂前請詢問!

Sparkfun系列 美國原裝 LIDAR-Lite v3、Arduino 雷射測距模組 ( SEN-14032)

INTRODUCTION

    It’s back! This is the LIDAR-Lite v3, a compact, high-performance optical distance measurement sensor from Garmin™. When space and weight requirements are tight, the LIDAR-Lite v3 soars. The LIDAR-Lite v3 is the ideal solution for drone, robot or unmanned vehicle applications.

    This easy-to-use 40-meter laser-based optical ranging sensor has all the core features that made the LIDAR-Lite v2 so popular. Small in form and light in weight with low power consumption of less than 130mA during an acquisition. And it’s user-configurable so you can adjust between accuracy, operating range and measurement time.

    Each LIDAR-Lite v3 features an edge-emitting, 905nm (1.3 watts), single-stripe laser transmitter, 4 m Radian x 2 m Radian beam divergence, and an optical aperture of 12.5mm. The third version of the LIDAR-Lite still operates at 5V DC with a current consumption rate of <100mA at continuous operation. On top of everything else, the LIDAR-Lite is user-configurable, allowing adjustment between accuracy, operating range and measurement time. It can be interfaced via I2C or PWM with the included 200mm accessory cable.

Note: CLASS 1 LASER PRODUCT CLASSIFIED EN/IEC 60825-1 2014. This product is in conformity with performance standards for laser products under 21 CFR 1040, except with respect to those characteristics authorized by Variance Number FDA-2016-V-2943 effective September 27, 2016.

Features 

  • Range: 0-40m Laser Emitter
  • Accuracy: +/- 2.5cm at distances greater than 1m
  • Power: 4.75–5V DC; 6V Max
  • Current Consumption: 105mA idle; 130mA continuous
  • Rep Rate: 1–500Hz
  • Laser Wave Length/Peak Power: 905nm/1.3 watts
  • Beam Divergence: 4m Radian x 2m Radian
  • Optical Aperture: 12.5mm
  • Interface: I2C or PWM
  • 20 x 48 x 40 mm (0.8 x 1.9 x 1.6 inches)

Hardware Overview

Differences Between v3 and v3HP

Functionally, the LIDAR-Lite v3 and LIDAR-Lite v3HP are quite similar. The primary differences are listed here:

Specs

LIDAR-Lite v3

LIDAR-Lite v3HP

Update Rate

500 Hz

> 1kHz

 消耗電流(閒置)
Current Consumption (idle)

105 mA

65 mA

消耗電流(購置)
Current Consumption (acquisition)

130 mA

85 mA

Casing

None

IPX7 rated casing

Note: An IPX7 rating means that the body of this device can withstand incidental exposure to water of up to 1meter for up to 30 minutes. The bare wire portion of the wiring harness is not water resistant. All bare wire connections must either be made in a water tight location or properly sealed.

說明:https://learn.sparkfun.com/tutorials/lidar-lite-v3-hookup-guide?_ga=2.244750726.2032197004.1529903910-2007213171.1517364630

案件

LIDAR-Lite在前面有兩個管子,包含一個發射器(激光器)和接收器。你會想要面對你的目標。

Front of LIDAR-Lite v3

此步驟僅適用於LIDAR-Lite v3:

在側面,您會發現連接到隨附的6線電纜的電氣端口。將線束插入端口以分離引腳。

 

在背面,您會發現4個安裝孔,用於安裝#6或M3.5螺釘或螺栓。

LIDAR-Lite v3的背面

電線:LIDAR-Lite有6根導線可用於與傳感器進行通信。

LIDAR-Lite v3引腳

注意: 這是看單位的背面

顏色 描述
5V 電源(5V)
橙子 PWR EN 電源啟用(內部上拉)
黃色 模式 模式控制(用於PWM模式)
綠色 SCL 2 C時鐘
藍色 SDA I 2 C數據
黑色 GND 地面

功率:LIDAR-Lite v3以及LIDAR-Lite v3HP設備都需要4.5V至5.5V的直流電源(標稱值為5V)。LIDAR-LITE v3在連續工作時可以吸收135 mA的電流(怠速時為105 mA)。相反,v3HP單元在連續工作期間(怠速時為65 mA)吸收高達85 mA的電流。為了保持電平電壓,Garmin建議在電源(5V)和地(GND)之間放置一個680μF電容,盡可能靠近LIDAR單元。

⚡ 請注意電流消耗的差異!請注意,雖然LIDAR-Lite v3和v3HP的輸入電壓相同,但電流消耗不同

硬件組裝

  按照下圖將LIDAR單元連接到RedBoard或其他Arduino兼容板。LIDAR-Lite可以通過I 2 C 進行通信,也可以使用脈寬調製(PWM)信號來表示測量距離。在本指南中,我們將展示如何使用I 2 C與LIDAR單元進行通信。

LIDAR-Lite v3轉換為Arduino連接

注意: Garmin建議使用680μF,但接近該值的任何東西都可以使用。在這個例子中,我使用了一個1000μF的電容。確保將電解電容正確添加到電路中,因為它具有極性。

問與答

目前沒有任何商品問答!
本商品上架日期:2018-01-30.
評價
購物車 更多
空的...
查詢訂單狀態
 
請輸入您的訂單編號
商品通知狀態 更多
通知●Sparkfun系列 美國原裝 LIDAR-Lite v3、Arduino 雷射測距模組 40M (SEN-14032)
更新時通知我
推薦給朋友
 
推薦這個商品給朋友

聯絡方式:手機:0933807110 或 0968222607
E-mail:i0104@ms13.hinet.net(主要信箱) & i03070309@yahoo.com.tw(次要) & a_te0307@hotmail.com & A9215017@mail.ntust.edu.tw & r94922042@ntu.edu.tw